From Polymeric Precursors to Hollow Fiber Carbon and Ceramic Membranes

Membrane Science and Technology

Volumn 13, Issue , 2008, Pages 81-119

  Ismail, Ahmad Fauzi ^a   Li, Kang ^b  

^a UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

^b IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 41449094495     PISSN: 09275193     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0927-5193(07)13003-5     Document Type: Review

References (96)

1. Ash R., Barrer R.M., and Lowson R.T. Transport of single gases and of binary mixtures in a microporous carbon membrane. J. Chem. Soc. Faraday Trans. I 69 (1973) 2166-2178
2. Hayashi J., Mizuta H., Yamamoto M., Kusakabe K., and Morooka S. Pore size control of carbonized BPTA-pp′ODA polyimide membrane by chemical vapor deposition of carbon. J. Membr. Sci. 124 (1997) 243-251
3. Kyotani T. Control pore in carbon. Carbon 38 (2000) 269-286
4. Jones C.W., and Koros W.J. Characterization of ultramicroporous carbon membranes with humidified feeds. Ind. Eng. Chem. Res. 34 (1995) 158-163
5. Kishore N., Sachan S., Rai K.N., and Kumar A. Synthesis and characterization of a nanofiltration carbon membrane derived from phenol-formaldehyde resin. Carbon 41 15 (2003) 2961-2972
6. Sakata Y., Muto A., Uddin M.A., and Suga H. Preparation of porous carbon membrane plates for pervaporation separation applications. Sep. Purif. Technol. 17 2 (1999) 97-100
7. Song C., Wang T., Pan Y., and Qiu J. Preparation of coal-based microfiltration carbon membrane and application in oily wastewater treatment. Sep. Purif. Technol. 51 1 (2006) 80-84
8. 2 mixture. Sep. Sci. Technol. 22 (1987) 973-982
9. Koresh J.E., and Soffer A. Mechanism of permeation through molecular sieve carbon membrane. Part 1-The effect of adsorption and the dependence on pressure. J. Chem. Soc. Faraday Trans. I 82 (1986) 2057-2063
10. Koresh J.E., and Soffer A. Molecular sieve carbon permselective membrane. Part I: Presentation of a new device for gas mixture separation. Sep. Sci. Technol. 18 (1983) 723-734
11. Saufi S.M., and Ismail A.F. Fabrication of carbon membranes for gas separation-a review. Carbon 42 (2004) 241-259
12. Schindler E., and Maier F. Manufacture of Porous Carbon Membranes (1990) US Patent 4,919,860
13. Suda H., and Haraya K. Gas permeation through micropores of carbon molecular sieve membranes derived from Kapton polyimide. J. Phys. Chem. B 101 (1997) 3988-3994
14. Liang G., Sha G., and Guo S. Carbon membrane for gas separation derived from coal tar pitch. Carbon 37 (1999) 1391-1397
15. Morthon-Jones D.H. Polymer Processing (1989), Chapman and Hall, London
16. Soffer A., Rosen D., Saguee S., and Koresh J. Carbon Membranes (1989) GB Patent 2,207,666
17. Laszlo K., Bota A., and Nagy L.G. Comparative adsorption study on carbons from polymer precursors. Carbon 38 (2000) 1965-1976
18. Jones C.W., and Koros W.J. Carbon molecular sieve gas separation membranes-I Preparation and characterization based on polyimide precursors. Carbon 32 (1994) 1419-1425
19. Hatori H., Kobayashi T., Hanzawa Y., Yamada Y., Iimura Y., Kimura T., and Shiraishi M. Mesoporous carbon membranes from polyimide blended with poly(ethyleneglycol). J. Appl. Polym. Sci. 79 (2001) 836-841
20. 4 separation using carbon molecular sieve hollow fibre membranes. Ind. Eng. Chem. Res. 41 (2002) 367-380
21. Yamamoto M., Kusakabe K., Hayashi J., and Morooka S. Carbon molecular sieve membrane formed by oxidative carbonization of a copolyimide film coated on a porous support tube. J. Membr. Sci. 133 (1997) 195-205
22. Hatori H., Shiraishi M., Nakata H., and Yoshitomi S. Carbon molecular sieve films from polyimide. Carbon 30 (1992) 719-720
23. Petersen J., Matsuda M., and Haraya K. Capillary carbon molecular sieve membranes derived from Kapton for high temperature gas separation. J. Membr. Sci. 131 (1997) 85-94
24. Fuertes A.B., Nevskaia D.M., and Centeno T.A. Carbon composite membranes from Matrimid and Kapton polyimide. Microporous Mesoporous Mater. 33 (1999) 115-125
25. Fuertes A.B., and Centeno T.A. Carbon molecular sieve membranes from polyetherimide. Microporous Mesoporous Mater. 26 (1998) 23-26
26. Sedigh M.G., Xu L., Tsotsis T.T., and Sahimi M. Transport and morphological characteristics of polyetherimide-based carbon molecular sieve membranes. Ind. Eng. Chem. Res. 38 (1999) 3367-3380
27. Coutinho M.B., Salim V.M.M., and Borgees C.P. Preparation of carbon hollow fibre membranes by pyrolysis of polyetherimide. Carbon 41 (2003) 1707-1714
28. Centeno T.A., and Fuertes A.B. Supported carbon molecular sieve membranes based on phenolic resin. J. Membr. Sci. 160 (1999) 201-211
29. Centeno T.A., and Fuertes A.B. Carbon molecular sieve membranes derived from a phenolic resin supported on porous ceramic tubes. Sep. Purif. Technol. 25 (2001) 379-384
30. Fuertes A.B. Effect of air oxidation on gas separation properties of adsorption-selective carbon membranes. Carbon 39 (2001) 697-706
31. Sedigh M.G., Onstot W.J., Xu L., Peng W.L., Tsotsis T.T., and Sahimi M. Experiments and simulation of transport and separation of gas mixtures in carbon molecular sieves membranes. J. Phys. Chem. A 102 (1998) 8580-8589
32. Acharya M. Engineering Design and Theoretical Analysis of Nanoporous Carbon Membranes for Gas Separation (1999), University of Delaware Ph.D. Thesis
33. Chen Y.D., and Yang R.T. Preparation of carbon molecular sieve membrane and diffusion of binary mixtures in the membrane. Ind. Eng. Chem. Res 33 (1994) 3146-3153
34. Shiflett M.B., and Foley H.C. On the preparation of supported nanoporous carbon membranes. J. Membr. Sci. 179 (2000) 275-282
35. Shiflett M.B., and Foley H.C. Ultrasonic deposition of high selectivity nanoporous carbon membranes. Science 285 (1999) 1902-1905
36. Acharya M., and Foley H.C. Spray-coating of nanoporous carbon membranes for air separation. J. Membr. Sci. 161 (1999) 1-5
37. Corbin D.R., Foley H.C., and Shiflett M.B. Mixed Matrix Nanoporous Carbon Membranes (2001) WO Patent 01/97956
38. Shiflett M.B., and Foley H.C. Reproducible production of nanoporous carbon membranes. Carbon 39 (2001) 1421-1446
39. Strano M.S., and Foley H.C. Synthesis and characterization of catalytic nanoporous carbon membranes. AIChE J. 47 (2001) 66-78
40. Strano M.S., and Foley H.C. Temperature- and pressure-dependent transient analysis of single component permeation through nanoporous carbon membranes. Carbon 40 (2002) 1029-1041
41. Donnet J.B., and Bansal R.C. Carbon Fibre (1984), Marcel Dekker, New York
42. Yoneyama H., and Nishihara Y.Y. Porous Hollow Carbon Fibre Film and Method of Manufacturing the Same. (1990) EP Patent 0,394,449A1
43. Linkov V.M., Sanderson R.D., and Jacobs E.P. Highly asymmetrical carbon membranes. J. Membr. Sci. 95 (1994) 93-99
44. Linkov V.M., Sanderson R.D., and Jacobs E.P. Carbon membranes from precursors containing low carbon residual polymers. Polym. Int. 35 (1994) 239-242
45. Smith S.P.J., Linkov V.M., Sanderson R.D., Petrik L.F., O'Conner C.T., and Keiser K. Preparation of hollow-fibre composite carbon-zeolite membranes. Microporous Mater. 4 (1995) 385-390
46. Linkov V.M., Sanderson R.D., and Rychkov B.A. Composite carbon-polyimide membranes. Mater. Lett. 20 (1994) 43-46
47. Linkov V.M., Bobrova L.P., Tomifeev S.V., and Sanderson R.D. Composites membranes from perfluoro-sulfonated ionomer on carbon and ceramic supports. Mater. Lett. 24 (1995) 147-151
48. 2 separation. J. Membr. Sci. 213 (2003) 285-291
49. Ismail A.F., and David L.I.B. A review on the latest development of carbon membranes for gas separation. J. Membr. Sci. 193 (2001) 1-18
50. Geiszler V.C. Polyimide Precursors for Carbon Membranes (1997), University of Texas Ph.D. Thesis
51. Puri P.S. Fabrication of hollow fibre gas separation membranes. Gas Sep. Purif. 4 (1990) 29-36
52. Edie D.D. The effect of processing on the structure and properties of carbon fibres. Carbon 36 4 (1998) 354-362
53. Gupta A., and Harisson I.R. New aspects in the oxidative stabilization of PAN-based carbon fibres. Carbon 34 11 (1996) 1427-1445
54. Ghosal A.S., and Koros W.J. Air separation properties of flat sheet homogeneous pyrolytic carbon membranes. J. Membr. Sci. 174 (2000) 177-188
55. Koresh J.E., and Soffer A. Study of molecular sieve carbon. Part 1-Pore structure, gradual pore opening and mechanism of molecular sieving. J. Chem. Soc. Faraday Trans. I 76 (1980) 2457-2471
56. Steel K.M., and Koros W.J. An investigation of the effect of pyrolysis parameters on gas separation properties of carbon membranes. Carbon 43 9 (2005) 1843-1856
57. Steel K.M. Carbon Membranes for Challenging Gas Separations (2000), University of Texas Ph.D. Thesis
58. Geiszler V.C., and Koros W.J. Effect of polyimide pyrolysis conditions on carbon molecular sieve membrane properties. Ind. Eng. Chem. Res. 35 (1996) 2999-3003
59. David L.I.B. Development of Asymmetric Polyacrylonitrile Carbon Hollow Fibre Membrane for Oxygen/Nitrogen Gas Separation, (2001), Universiti Teknologi Malaysia M.Sc. Thesis
60. Suda H., and Haraya K. Alkene/alkane permselectivities of a carbon molecular sieve membrane. J. Chem. Soc. Chem. Commun. (1997) 93-94
61. Soffer A., Koresh J., and Saggy S. Separation Device (1987) US Patent 4685940
62. Kusakabe K., Yamamoto M., and Morooka S. Gas permeation and micropore structure of carbon molecular sieving membranes modified by oxidation. J. Membr. Sci. 149 (1998) 59-67
63. Soffer A., Azariah M., Amar A., Cohen H., Golub D., Saguee S., and Tobias H. Method of Improving the Selectivity of Carbon Membranes by Chemical Vapor Deposition (1997) US Patent 5,695,818
64. Hayashi J., Yamamoto M., Kusakabe K., and Morooka S. Simultaneous improvement of permeance and permselectivity of 3,3′4,4′-biphenyltetracarboxylic dianhydride-4,4′-oxydianiline polyimide membrane by carbonization. Ind. Eng. Chem. Res. 34 (1995) 4364-4370
65. Cabrera A.L., Zehnar J.E., Coe C.G., Gaffney T.R., and Farris T.S. Preparation of carbon molecular sieve I. Two steps hydrocarbon deposition with a single hydrocarbon. Carbon 31 (1993) 969-976
66. Chihara K., and Suzuki M. Control of micropore diffusivities of molecular sieving carbon by deposition of hydrocarbons. Carbon 17 (1979) 339-343
67. Verma S.K., and Walker Jr. P.L. Carbon molecular sieves with stable hydrophobic surfaces. Carbon 30 (1992) 837-844
68. Fuertes A.B., and Mendez I. Separation of hydrocarbon gas mixtures using phenolic resin-based carbon membranes. Sep. Purif. Tech. 28 (2002) 29-41
69. Koros W.J., and Jones C.W. Composite Carbon Fluid Membranes (1994) US Patent 5,288,304
70. Jones C.W., and Koros W.J. Carbon composite membranes: A solution to adverse humidity effects. Ind. Eng. Chem. Res. 34 (1995) 164-167
71. Zhang G.L., and Cussler E.L. Distillation in hollow fibers. AIChE J. 49 9 (2003) 2344-2351
72. Way J.D., and Roberts D.L. Hollow fiber inorganic membranes for gas separations. Sep. Sci. Technol. 27 1 (1992) 29-41
73. Tan X.Y., Liu S.M., and Li K. Preparation and characterization of inorganic hollow fiber membranes. J. Membr. Sci. 188 1 (2001) 87-95
74. 3-a perovskite for use as a membrane material in hollow fibre fabrication. Mater. Res. Bull. 39 1 (2004) 119-133
75. 3) hollow fibre membranes by a combined phase-inversion and sintering method. Ceram. Int. 29 8 (2003) 875-881
76. 3 composite hollow fibre membranes. J. Membr. Sci. 218 1-2 (2003) 269-277
77. 2.975 hollow fibre membranes. J. Membr. Sci. 193 2 (2001) 249-260
78. Hsieh H.P. organic Membranes for Separation and Reaction (1996), Elsevier Science B.V., Amsterdam, The Netherlands, 23-86
79. Bideau D., and Troadec J.P. Compacity and mean coordination-number of dense packings of hard disks. J. Phys. C Solid State Phys. 17 28 (1984) L731-L735
80. Visscher W.M., and Bolsterl M. Random packing of equal and unequal spheres in 2 and 3 dimensions. Nature 239 5374 (1972) 504
81. Kausch H.H., Fesko H.H., and Tschoegl N.W. Random packing of circles in a plane. J. Coll. Interf. Sci. 37 3 (1971) 603
82. Starr T.L. Packing density of fiber powder blends. Am. Ceram. Soc. Bull. 65 9 (1986) 1293-1296
83. Rahaman M.N. Ceramic Processing and Sintering (1995), Marcel Dekker Inc., New York 265-279
84. Lee B.I., and Rives B.I. Dispersion of alumina powders in nonaqueous media. Colloids Surf. 56 (1991) 25-43
85. Mikeska K.R., and Cannon K.R. Dispersants for tape casting barium titanate. In: Mangels J.A., and Messing G.L. (Eds). Advances in Ceramics (1984), The American Ceramic Society, Westerville 164-183
86. Bergstrom W.R. Rheological properties of concentrated, nonaqueous silicon nitride suspensions. J. Am. Ceram. Soc. 79 12 (1996) 3033-3040
87. Bergstrom L. Rheology of concentrated suspensions. In: Pugh R.J., and Bergstorm L. (Eds). Surface and Colloid Chemistry (1994), Marcel Dekker, New York
88. Bergstrom L. Surface and colloid chemistry. In: Pugh P.J., and Bergstrom L. (Eds). Advanced Ceramic Processing (1994), Marcel Dekker, New York 193-224
89. Kitano T., Kataoka T., and Shirota T. An empirical-equation of the relative viscosity of polymer melts filled with various inorganic fillers. Rheol. Acta 20 2 (1981) 207-209
90. Sakka S. Rheology of sols in sol-gel processing. In: M.A. A., et al. (Ed). Sol-Gel Science and Technology (1989), World Scientific Publisher, Singapore 76-103
91. Deshmukh S.P., and Li K. Effect of ethanol composition in water coagulation bath on morphology of PVDF hollow fibre membranes. J. Membr. Sci. 150 1 (1998) 75-85
92. Richardson D.W. Morden Ceramic Engineering (1992), Marcel Dekker Inc., New York
93. Li K., Xiaoyao K., and Liu Y. Single-step fabrication of ceramic hollow fibers for oxygen permeation. J. Membr. Sci. 272 1-2 (2006) 1-5
94. Binner J.G.P. Advanced Ceramic Processing and Technology (1990), Noyes Publications, New Jersey
95. Reed J.S. Principles of Ceramic Processing. second ed. (1995), John Wiley & Sons, New York
96. 3) hollow fibre membranes by a combined phase-inversion and sintering method. Ceram. Int. 29 (2003) 875-881