Effect of sequence concentrations on segmented polyurethanes properties

Pigment and Resin Technology

Volumn 37, Issue 2, 2008, Pages 73-79

  Elidrissi, A ^a   Krim, O ^a   Ousslimane, S ^a  

^a FACULTÉ DES SCIENCES   (Morocco)

Author keywords

Elastomers; Polyurethane; Thermal properties of materials

Indexed keywords

CONCENTRATION (PROCESS); DIFFERENTIAL SCANNING CALORIMETRY; MOLECULAR WEIGHT; PHASE SEPARATION; SULFUR COMPOUNDS; THERMODYNAMIC PROPERTIES;

POLY(TETRAMETHYLENE GLYCOL); PRE-POLYMER METHOD; SOFT SEQUENCES;

POLYURETHANES;

EID: 41149096452     PISSN: 03699420     EISSN: None     Source Type: Journal    
DOI: 10.1108/03699420810860419     Document Type: Article

References (43)

1. 12MDI and mixed macrodiols (PDMS-PHMO)", J. Appl. Polym. Sci., Vol. 74 No. 12, pp. 2979-89.
2. Adhikari, R., Gunatillake, P.A., Meijs, G.F. and Mecarthy, S.J. (1999b), "The effect of diisocyanate isomer composition on properties and morphology of polyurethanes based on 4,4-dicyclohexyl methane diisocyanate and mixed macrodiols (PDMS-PHMO)", J. Appl. Polym. Sci., Vol. 73 No. 4, pp. 573-82.
3. Aneja, A. and Wilkes, G.L. (2003), "A systematic series of model PTMO based segmented polyurethanes reinvestigated using atomic force microscopy", Polymer, Vol. 44 No. 23, pp. 7221-8.
4. Bengston, B., Feger, C. and Macknight, W.J. (1985), "Thermal and mechanical properties of solution polymerized segmented polyurethanes with butadiene soft segments", Polymer, Vol. 26 No. 6, pp. 895-900.
5. Blackwell, J. and Lee, C.D. (1984), "Hard segment polymorphism in MDI/diol based polyurethane elastomers", J. Polym. Sci., Part B: Polym. Phys., Vol. 22 No. 4, pp. 759-72.
6. Bonart, R., Morbitzer, L. and Muller, E.H. (1977), "Domain structure and time-dependent properties of a crosslinked urethane elastomer", J. Appl. Polym. Sci., Vol. 9 No. 9, pp. 2489-503.
7. Camberlin, Y. and Pascault, Y.P. (1983), "Quantitative DSC evaluation of phase segregation rate in linear segmented polyurethanes and polyurethaneureas", Journal of Polymer Sciences, Vol. 21 No. 2, pp. 415-23.
8. Camberlin, Y. and Pascault, Y.P. (1984), "Phase segregation kinetics in segmented linear polyurethanes: relations between equilibrium time and chain mobility and between equilibrium degree of segregation and interaction parameter", J. Polym. Sci., Part A: Polym. Chem., Vol. 22 No. 10, pp. 1835-44.
9. Chen, W.P. and Schlick, S. (1990), "Study of phase separation in polyurethanes using paramagnetic labels: effect of soft segment molecular weight and temperature", Polymer, Vol. 31 No. 2, pp. 308-14.
10. Cooper, S.L. and Tobolsky, A.V. (1966), "Properties of linear elastomeric polyurethanes", J. Appl. Polym. Sci., Vol. 10 No. 12, pp. 1837-44.
11. Cuvé, L., Pascault, J.P. and Boiteux, G. (1992), "Synthesis and properties of polyurethanes based on polyolefin: 2. semi-crystalline segmented polyurethanes prepared under homogeneous conditions", Polymer, Vol. 33 No. 18, pp. 3957-67.
12. Cuvé, L., Pascault, J.P., Boiteux, G. and Seytre, G. (1991), "Synthesis and properties of polyurethanes based on polyolefin: rigid polyurethanes and amorphous segmented polyurethanes prepared in polar solvents under homogeneous conditions", Polymer, Vol. 32 No. 2, pp. 343-52.
13. Darud, V. (1988), "Relationships between synthesis and mechanical properties of new polyurea materials", Thèse docteur Ingénieur, Institut National des Sciences Appliquées de Lyon, Saint-Étienne-du-Rouvray.
14. Dolmaire, N., Espuche, E., Méchin, F. and Pascault, J.P. (2004), "Water transport properties of thermoplastic polyurethane films", J. Polym. Sci., Part B: Polym. Phys, Vol. 42 No. 3, pp. 473-92.
15. 13C NMR magic angle spinning and FT-IR spectroscopy", Makromol. Chem. Rap. Common., Vol. 4 No. 11, pp. 707-13.
16. Fridman, I.D. and Thomas, E.L. (1980), "Morphology of crystalline polyurethane hard segment domains and sphenulites", Polymer, Vol. 21 No. 4, pp. 388-92.
17. Gorna, K., Polowinski, S. and Gogolewski, S. (2002), "Synthesis and characterization of biodegradable poly (E-caprolactoneurethane). 1. Effect of the polyol molecular weight, catalyst, and chain extender on the molecular and physical characteristics", J. Polym. Sci., Part A, Vol. 40 No. 1, pp. 156-70.
18. Gunatillake, P.A., Meijs, G.F., Mecarthy, S.J., Adhikari, R. and Sherriff, N. (1998), "Synthesis and characterisation of a series of poly(alkylene carbonate) macrodiols and the effect of their structure on the properties of polyurethanes", J. Appl. Polym. Sci., Vol. 69 No. 8, pp. 1621-33.
19. Hsu, S.H., Kao, Y.C. and Lin, Z.C. (2004), "Enhanced biocompatibility in biostable poly(carbonate) urethane", Macromol Biosc, Vol. 4 No. 4, pp. 465-70.
20. Jacobi, E., Schuhenberg, H. and Scaulz, R.C. (1980), "A new methods for gel chromatography of polyamides", Macromol. Chem. Rap. Comm., Vol. 1 No. 6, pp. 397-402.
21. Jimenez, G., Asai, S., Shishidob, A. and Sumita, M. (2000), "Effect of the soft segment on the fatigue behavior of segmented polyurethanes", Eur. Polym. J., Vol. 36 No. 9, pp. 2039-50.
22. Kim, A.D., Lee, T.J., Huh, J.H. and Lee, D.J. (1999), "Preparation and properties of segmented thermoplastic polyurethane elastomers with two different soft segments", J. Appl. Polym. Sci., Vol. 73 No. 3, pp. 345-52.
23. Kolodziej, P., Yang, W.P., Macosko, C.W. and Wellinghoff, S.T. (1986), "Impingement mixing and its effect on the microstructure of RIM polyurethanes", J. Polym. Sci., Part B: Polym. Phys., Vol. 24 No. 9, pp. 2359-77.
24. Kultys, A., Podkocielny, W. and Pibus, S. (1999), "Polyurethanes containing sulphur. 1. New thermoplastic polyurethanes with benzophenone unit in their structure", J. Polym. Sci., Part A: Polym. Chem, Vol. 37 No. 22, pp. 4140-50.
25. Kwei, T.K. (1982), "Phase separation in segmented polyurethanes", J. Appl. Polym. Sci., Vol. 27 No. 8, pp. 2891-9.
26. Lee, D., Lee, S.H., Kim, S., Char, K., Park, J.H. and Bae, Y.H. (2003), "Micro-phase-separation behavior of amphiphilic polyurethanes involving poly(ethylene oxide) and poly(tetramethylene oxide)", J. Polym. Sci., Part. B. Polym. Phys., Vol. 41 No. 20, pp. 2365-74.
27. Lee, D.K. and Tsai, H.B. (2000), "Properties of segmented polyurethanes derived from different diisocyanates", J. Appl. Polym. Sci., Vol. 75 No. 1, pp. 167-74.
28. Lin, C.C. and Baliga, S. (1986), "A study on the polycondensation of bis-hydroxyethyl terephthalate", J. Appl. Polym. Sci., Vol. 31 No. 8, pp. 2483-9.
29. Mormann, W. and Zhang, C. (2003), "Ternary phase separation in polyurethane elastomers with immiscible soft segments", Macromolecular Bioscience, Vol. 198 No. 1, pp. 271-82.
30. Nakamae, K., Nishino, T., Asaoka, S. and Sudaryanto (1999), "Relationships between interfacial properties and structure of segmented polyurethane having functional groups", Inter. J. Adhes. Adhes, Vol. 19 No. 5, pp. 345-51.
31. Nbeth, B., Corniglion, I. and Pascault, J.P. (1998), "Influence of the glass transition temperature of polyurethane and polyurethane acrylate networks", J. Polym. Sci., Part B: Polym. Phys., Vol. 43 No. 3, pp. 401-17.
32. Nguyen, T.Q. and Kausch, H.H. (1958), "Protective effect of the phenyl group in (-irradiated compatible blends of poly(methylmethacrylate) and poly(styrene-co-acrylonitrile)", J. Polym. Sci., Vol. 29 No. 120, pp. 455-64.
33. Seefried, C.G., Koleske, J.V. and Critchfield, F.F. (1975), "Thermoplastic urethane elastomers. Effect of variations in hard-segment concentration", J. Appl. Polym. Sci., Vol. 19 No. 9, pp. 2503-13.
34. Song, Y.M., Chen, W.C., Yu, T.L., Linliu, K. and Tseng, Y.H. (1996), "Dynamic mechanical properties and morphology of polypropylene/maleated polypropylene blends", J. Appl. Polym. Sci., Vol. 62 No. 5, pp. 827-34.
35. Sudaryanto, Nishino, T., Asaoka, S. and Nakamae, K. (2001), "Incorporation of methyl groups into hard segments of segmented polyurethane: microphase separation and adhesive", Inter. J. Adhes. Adhes., Vol. 21 No. 1, pp. 71-5.
36. Takahara, A., Tachita, J.I., Kajiyama, T., Takayanagi William, M. and Macknight, J. (1985), "Microphase separated structure and blood compatibility of segmented poly(urethaneureas) with different diamines in the hard segment", Polymer, Vol. 26 No. 7, pp. 978-86.
37. Tan, H., Guo, M., Du, R., Xie, X., Li, J., Zhong, Y. and Fu, Q. (2005), "The effect of fluorinated side chain attacked on hard segment on the phase separation and surface topography of polyurethanes", Polymer, Vol. 45 No. 5, pp. 1647-57.
38. Tonelli, C., Trombetta, T. and Maccone, P. (1999), "Synthesis and physical characterisation of model hard segments based on diphenyl methane diisocyanate and hydroquinone bis (2-hydroxyethyl)ether", J. Polym. Sci., Part A: Polym. Chem., Vol. 37 No. 10, pp. 1473-87.
39. Truca, T.A., Pébère, N., Xuan Hang, T., Hervaud, Y. and Boutevin, B. (2004), "Evaluation of corrosion performance of a UV- cured polyurethane coating in the presence of organic phosphorous compounds", Pro. Org. Coat., Vol. 49 No. 2, pp. 130-6.
40. Vilensky, V.A. and Lipatov, Y.S. (1994), "A criterion for microphase separation in segmented polyurethanes and polyurethane ureas", Polymer, Vol. 35 No. 14, pp. 3069-74.
41. Xie, M. and Camberlin, Y. (1986), "Etude morphologique de bloc copoly(ether-amide)s", Makomol. Chem., Vol. 187 No. 2, pp. 383-400.
42. Xu, M., MacKnight, W.J., Chen-Tsai, C.H.Y. and Thomas, E.L. (1987), "Structure and morphology of segmented polyurethanes: domain structures of different scales and the composition", Polymer, Vol. 28 No. 13, pp. 2183-9.
43. Yamaguch, I., Takenaka, Y., Osakada, K. and Yamamoto, T. (1998), "Synthesis of poly [(p-xylene carbonate)-co-(p-xylene oxide)] with OH end groups and its poly-addition with diisocyanates", Polym. Bull., Vol. 41 No. 1, pp. 29-35.