Influence of mixing conditions on rheological behavior and electrical conductivity of polyamides filled with carbon black

Rheologica Acta

Volumn 47, Issue 2, 2008, Pages 201-212

  Leboeuf, Mathilde ^a,b   Ghamri, Nessim ^b   Brulé, Benoît ^b   Coupez, Thierry ^a   Vergnes, Bruno ^a  

^a PSL RESEARCH UNIVERSITY   (France)

^b ARKEMA   (France)

Author keywords

Carbon black; Electrical resistivity; Network; Polyamide; Structure breakdown

Indexed keywords

CARBON BLACK; ELECTRIC CONDUCTIVITY OF SOLIDS; ELECTRIC PROPERTIES; MIXING; POLYAMIDES; RHEOLOGY;

EID: 41149094614     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00397-007-0232-5     Document Type: Article

References (38)

1. Bar-Chaput S, Carrot C (2006) Rheology as a tool for the analysis of the dispersion of carbon filler in polymers. Rheol Acta 45:339-347
2. Bohin F, Manas-Zloczower I, Feke DL (1996) Kinetics of dispersion for sparse agglomerates in simple flows: Application to silica agglomerates in silicone polymers. Chem Eng Sci 51:5193-5204
3. Boonstra BB (1977) Resistivity of unvulcanized compounds of rubber and carbon black. Rubber Chem Technol 50:194-210
4. Boonstra BB, Medalia IA (1963) Effect of carbon black dispersion on the mechanical properties of rubber vulcanizates. Rubber Chem Technol 36:115-142
5. Carmona F, Ravier J (2002) Electrical properties and mesostructure of carbon black-filled polymers. Carbon 40:151-156
6. Cassagnau P, Mélis F (2003) Non-linear viscoelastic behaviour and modulus recovery in silica filled polymer. Polymer 44:6607-6615
7. Cembrola RJ (1983) Resistivity and surface roughness analysis for evaluating carbon black dispersion in rubber. Rubber Chem Technol 56:233-245
8. Das NC, Chaki TK, Khastgir D (2002) Effect of processing parameters, applied pressure and temperature on the electrical resistivity of rubber-based conductive composites. Carbon 40:807-816
9. Feller JF, Petitjean E (2003) Conductive polymer composites (CPC): influence of processing conditions, shear rates and temperatures on electrical properties of poly(butylene terephtalate)/poly(amide12- b -tetramethyle-neglycol)-carbon black blends. Macromol Symp 203:309-315
10. Feller JF, Linossier I, Charpentier A (2002) Conductive polymer composites (CPC): Influence of processing conditions, shear rate and temperature, on electrical properties of poly(butylenes terephtralate)/ poly(ethylene-co-ethyl acrylate)-carbon black blends. Proceedings of the 19th Congress of the Polymer Processing Society, Guimaraes, CD ROM
11. Kalyon DM, Birinci E, Yazici R, Karuv B, Walsh S (2002) Electrical properties of composites as affected by the degree of mixedness of the conductive filler in the polymer matrix. Polym Eng Sci 42:1609-1617
12. Kohjiya S, Katoh A, Shimanuki J, Hasegawa T, Ikeda Y (2005) Nanostructural observation of carbon black dispersion in natural rubber matrix by three dimensional transmission electron microscopy. J Mater Sci 40:2553-2555
13. Kohjiya S, Katoh A, Suda T, Shimanuki J, Ikeda Y (2006) Visualisation of carbon black networks in rubbery matrix by skeletonisation of 3D-TEM image. Polymer 47:3298-3301
14. Lee BL (1992) Electrically conductive polymer composites and blends. Polym Eng Sci 32:36-42
15. Lux F (1993a) Models proposed to explain the electrical conductivity of mixtures made of conductive and insulating materials. J Mater Sci 28:285-301
16. Lux F (1993b) Percolation in electrical conductive polymer/filer systems. I. Density/filler curves according to a new thermodynamic percolation model. Polym Eng Sci 33:334-342
17. Manas-Zloczower I, Nir A, Tadmor Z (1982) Dispersive mixing in internal mixers. A theoretical model based on agglomerate rupture. Rubber Chem Technol 55:1250-1285
18. Margolis JM (1989) Conductive polymers and plastics. Chapman & Hall, New York
19. Medalia AI (1986) Electrical conduction in carbon black composites. Rubber Chem Technol 59:432-454
20. Meincke O, Kaempfer D, Weickmann H, Friedrich C, Vathauer M, Warth H (2004) Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/ butadiene/styrene. Polymer 45:739-748
21. Payne AR (1965) Reinforcement of elastomers. Interscience, New York
22. Pécastaings G (2005) Contribution à l'étude et à la modélisation de la mésostructure de composites polymères-noir de carbone. Thèse de Doctorat, Université Bordeaux
23. Pötschke P, Bhattacharyya AR, Janke A (2003) Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate. Polymer 44:8061-8069
24. Pötschke P, Bhattacharyya AR, Janke A (2004) Carbon nanotube-filled polycarbonate composites produced by melt mixing and their use in blends with polyethylene. Carbon 42:965-969
25. Ravier J, Houzé F, Carmona F, Schneegans O, Saadaoui H (2001) Mesostructure of polymer/carbon black composites observed by conductive probe atomic force microscopy. Carbon 39:287-324
26. Rwei SP, Feke DL, Manas-Zloczower I (1991) Characterization of agglomerate dispersion by erosion in simple shear flow. Polym Eng Sci 31:558-562
27. Scurati A, Feke DL, Manas-Zloczower I (2002) Model and analysis for kinetics of agglomerate erosion in simple shear flows. Meeting of the ACS Rubber Division, Savannah, Georgia
28. Sichel EK (1982) Carbon black - polymer composites. Marcel Dekker, New York
29. Thongruang W, Spontak RJ, Balik CM (2002) Bridged double percolation in conductive polymer composites: An electrical conductivity, morphology and mechanical property study. Polymer 43:3717-3725
30. Vergnes B, Della Valle G, Colonna P (2003) Rheological properties of biopolymers and applications to cereal processing. In: Galetunk G, Breslauer KJ (eds) Characterization of cereals and flours. Marcel Dekker, New York, pp 209-265
31. Wan Y, Xiong C, Yu J, Wen D (2005) Effect of processing parameters on electrical resistivity and thermo-sensitive properties of carbon-black/ styrene-butadiene-rubber composite membranes. Compos Sci Technol 65:1769-1779
32. Wu G, Zheng Q (2004) Estimation of the agglomeration structure for conductive particles and fiber-filled high-density polyethylene through dynamic rheological measurements. J Polym Sci B Polym Phys 42:1199-1205
33. Wu G, Asai S, Sumita M, Hattori T, Higuchi R, Washiyama J (2000) Estimation of flocculation structure in filled polymer composites by dynamic rheological measurements. Colloid Polym Sci 278:220-228
34. Wu G, Lin J, Zheng Q, Zhang M (2006) Correlation between percolation behavior of electricity and viscoelasticity for graphite filled high density polyethylene. Polymer 47:2442-2447
35. Yu G, Zhang MQ, Zeng HM (1998) Carbon black filled polyolefine as a positive temperature coefficient material: Effect of composition, processing and filler treatment. J Appl Polym Sci 70:559-566
36. Yu J, Zhang LQ, Rogunova M, Summers J, Hiltner A, Baer E (2005) Conductivity of polyolefins filled with high-structure carbon black. J Appl Polym Sci 98:1799-1805
37. Yui H, Wu G, Sano H, Sumita M, Kino K (2006) Morphology and electrical conductivity of injection-molded polypropylene/carbon black composites with addition of high-density polyethylene. Polymer 47:3599-3608
38. Yurekli K, Krishnamoorti R, Tse MF, McElrath KO, Tsou AH, Wang HC (2001) Structure and dynamics of carbon black-filled elastomers. J Polym Sci B Polym Phys 39:256-275