A study on durability properties of high-performance concretes incorporating high replacement levels of slag

Materials and Structures/Materiaux et Constructions

Volumn 41, Issue 3, 2008, Pages 479-493

  Güneyisi, Erhan ^a   Gesoğlu, Mehmet ^a  

^a GAZIANTEP UNIVERSITY   (Turkey)

Author keywords

Absorption; Blast furnace slag; Concrete durability; Corrosion; Curing; High replacement level

Indexed keywords

BLAST FURNACES; CEMENTS; CONCRETES; CURING; DURABILITY;

BLAST FURNACE SLAGS; CONCRETE DURABILITY; HIGH REPLACEMENT LEVELS;

SLAGS;

EID: 41049110989     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/s11527-007-9260-y     Document Type: Article

References (49)

1. Badogiannis E, Papadakis VG, Chaniotakis E, Tsivilis S (2004) Exploitation of poor Greek kaolins: strength development of metakaolin concrete and evaluation by means of k-value. Cem Concr Res 34:1035-1041
2. Ramezanianpour AA, Malhotra VM (1995) Effect of curing on the compressive strength, resistance to chloride ion penetration and porosity of concretes incorporating slag, fly ash, or silica fume. Cem Concr Compos 17:125-133
3. Babu KG, Kumar VSR (2000) Efficiency of GGBS in concrete. Cem Concr Res 30:1031-1036
4. Pal SC, Mukherjee A, Pathak SR (2003) Investigation of hydraulic activity of ground granulated blast furnace slag in concrete. Cem Concr Res 33:1481-1486
5. Itoh H (2004) Rapid discrimination of the character of the water-cooled blast furnace slag used for Portland slag cement. J Mater Sci 39:2191-2193
6. Mill KC, Courtney L, Fox AB, Harris B. Idoyaga Z, Richardson MJ (2002) The use of thermal analysis in the determination of the crystalline fraction of slag films. Thermochim Acta 391:175-184
7. Gao JM, Qian CX, Liu HF, Wang B, Li L (2005) ITZ microstructure of concrete containing GGBS. Cem Concr Res 35:1299-1304
8. Ozyildirim C (1994) Investigation of low-permeability concretes containing slag and silica fume. ACI Mater J 91(2):197-202
9. Afrani I, Rogers C (1994) The effects of different cementing materials and curing on concrete scaling. Cem Concr Aggr 16(2):132-139
10. Parrott LJ (1996) Some effects of cement and curing upon carbonation and reinforcement corrosion in concrete. Mater Struct 29(187):164-173
11. Wainwright PJ, Aitaider H (1995) The influence of cement source and slag additions on the bleeding of concrete. Cem Concr Res 25(7):1445-1456
12. Lumley JS, Gollop RS, Moir GK, Taylor HFW (1996) Degrees of reaction of the slag in some blends with Portland cements. Cem Concr Res 26:139-151
13. Alshamsi AM (1997) Microsilica and ground granulated blast furnace slag effects on hydration temperature. Cem Concr Res 27(12):1851-1859
14. Dehghanian C, Arjemandi M (1997) Influence of slag blended cement concrete on chloride diffusion rate. Cem Concr Res 27(6):937-945
15. Jau WC, Tsay DS (1998) A study of the basic engineering properties of slag cement concrete and its resistance to seawater corrosion. Cem Concr Res 28(10):1363-1371
16. Erdogdu K, Tokyay M, Turker P (1999) Comparison of intergrinding and separate grinding for the production of natural pozzolan and GBFS-incorporated blended cements. Cement Concr Res 29(5):743-746
17. Gu P, Beaudoin JJ, Zhang MH, Malhotra VM (2000) Performance of reinforcing steel in concrete containing silica fume and blast-furnace slag ponded with sodium chloride solution. ACI Mater J 97(3):254-262
18. Wainwright PJ, Rey N (2000) The influence of ground granulated blast furnace slag (GGBS) additions and time delay on the bleeding of concrete. Cem Concr Comp 22:253-257
19. Hooton RD (2000) Canadian use of ground granulated blast-furnace slag as a supplementary cementing material for enhanced performance of concrete. Can J Civil Eng 27(4):754-760
20. Li Z, Ding Z (2003) Property improvement of portland cement by incorporating with metakaolin and slag. Cem Concr Res 33:579-584
21. Chang PK, Hou WM (2003) A study on the hydration properties of high performance slag concrete analyzed by SRA. Cem Concr Res 33:183-189
22. Li G, Zhao X (2003) Properties of concrete incorporating fly ash and ground granulated blast-furnace slag. Cem Concr Comp 25:293-299
23. Sobolev K, Yeginobali A (2005) The development of high-strength mortars with improved thermal and acid resistance. Cem Concr Res 35(3):578-583
24. Muralidharan S, Vedalakshmi R, Saraswathi V, Joseph J, Palaniswamy N (2005) Studies on the aspects of chloride ion determination in different types of concrete under macro-cell corrosion conditions. Build Environ 40:1275-1281
25. Hill N, Sharp JH (2002) The mineralogy and microstructure of three composite cements with high replacement levels. Cem Concr Comp 24:191-199
26. Miura T, Iwaki I (2000) Strength development of concrete incorporating high levels of ground granulated blast-furnace slag at low temperatures. ACI Mater J 97(1):66-70
27. Demirboǧa R, Türkmen İ, Karakoç MB (2004) Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete. Cem Concr Res 34:2329-2336
28. Hooton RD, Emery JJ (1990) Sulfate resistance of a Canadian slag cement. ACI Mater J 87(6):547-555
29. Algahtani AS, Rasheeduzzafar, Alsaadoun SS (1994) Rebar corrosion and sulfate resistance of blast-furnace slag cement. J Mater Civ Eng 6(2):223-239
30. Almussalam AA, Maslehuddin M, Abdul-Waris M, Dakhil FH, Al-Amoudi OSB (1999) Plastic shrinkage cracking of blended cement concretes in hot environments. Mag Concr Res 51(4):241-246
31. ASTM C642-97, Test method for density, absorption, and voids in hardened concrete, Annual Book of ASTM Standards, American Society for Testing and Materials, Vol. 04.02, October 2006
32. ASTM C1202-05, Test method for electrical indication of concrete's ability to resist chloride ion penetration, Annual Book of ASTM Standards, American Society for Testing and Materials, Vol. 04.02, October 2006
33. Al-Tayyib AJ, Al-Zahrani MM (1990) Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structure. ACI Mater J 87(2):108-113
34. Detwiler RJ, Kjellsen KO, Gjorv OE (1991) Resistance to chloride intrusion of concrete cured at different temperature. ACI Mater J 88(1):19-24
35. Shaker FA, El-Dieb AS, Reda MM (1997) Durability of styrene butadiene latex modified concrete. Cem Concr Res 27(5):711-720
36. Okba SH, El-Dieb AS, Reda MM (1997) Evaluation of the corrosion resistance of latex modified concrete (LMC). Cem and Concr Res 27(6):861-868
37. Al-Zahani MM, Al-Dulaijan SU, Ibrahim M, Saricimen H, Sharif FM (2002) Effect of waterproofing coating on steel reinforcement corrosion and physical properties of concrete. Cem Concr Comp 24:127-137
38. Güneyisi E, Özturan T, Gesoǧlu M (2005) A study on reinforcement corrosion and related properties of plain and blended cement concretes under different curing conditions. Cem Concr Comp 27(4):449-461
39. Hogan FJ, Meusel JW (1981) Evaluation for durability and strength development of a ground granulated blast furnace slag. Cem Concr Aggr 3(1):40-52
40. Roy DM, Idorn GM (1982) Hydration, structure, and properties of blast furnace slag cement, mortars, and concrete. J Am Concr Inst 79:444-457
41. Taşdemir MA, Taşdemir C, Özberk E, Altay B (1997) Fineness effect of GGBS on the properties and microstructure of concrete. In: Proceedingsof the 1st International Symposium on Mineral Admixtures in Cement, Istanbul, Turkey, pp 198-215
42. Khatip JM, Hibbert JJ (2005) Selected engineering properties of concrete incorporating slag and metakaolin. Constr Build Mater 19:460-472
43. Bai J, Wild S, Sabir BB (2002) Sorptivity and strength of air-cured and water-cured PC-PFA-MK concrete and the influence of binder composition on carbonation depth. Cem Concr Res 32:1813-1821
44. Dias WPS (2000) Reduction of concrete sorptivity with age through carbonation. Cem Concr Res 30:1255-1261
45. Malhotra VM, Carette GG, Bilodeau A, Sivasumdaram V (1991) Some aspect of durability of high volume ASTM class F fly ash concrete. In: Malhotra VM (ed) Proceedings of the second CANMET/ACI International Conference on Durability of Concrete, American Concrete Institute (ACI) Special Publication SP-126, pp 65-82
46. Plante P, Bilodeau A (1989) Rapid chloride ion permeability test: data on concretes incorporating supplementary cementing materials. In: Malhotra VM (ed) Proceeding of the third CANMET/ACI International Conference on the Use of Fly Ash, Silica Fume, Slag, and Natural Pozzolans, ACI Special Publication SP 114-30, pp 625-644
47. Bonavetti V, Donza H, Rahhal V, Irassar E (2000) Influence of initial curing on the properties of concrete containing limestone blended cement. Cem Concr Res 30:703-708
48. Kolias S, Georgiou C (2005) The effect of paste volume and of water content on the strength and water absorption of concrete. Cem Concr Comp 27:211-216
49. Buenfeld NR, Glass GK, Hassanein AM, Zhang JZ (1998) Chloride transport in concrete subjected to electrical field. J Mater Civ Eng 10(4):220-228