Three-dimensional noncoaxial plasticity modeling of shear band formation in geomaterials

Journal of Engineering Mechanics

Volumn 134, Issue 4, 2008, Pages 322-329

  Qian, J G ^a   Yang, Jun ^b   Huang, M S ^a  

^a TONGJI UNIVERSITY   (China)

^b UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Bifurcations; Constitutive models; Geomaterials; Plasticity; Three dimensional models

Indexed keywords

BIFURCATION (MATHEMATICS); CONSTITUTIVE MODELS; PLASTIC DEFORMATION; PLASTICITY; SHEAR BANDS; THREE DIMENSIONAL;

GEOMATERIALS; NONCOAXIAL CONSTITUTIVE RESPONSE;

GEOTECHNICAL ENGINEERING;

BIFURCATION (MATHEMATICS); CONSTITUTIVE MODELS; GEOTECHNICAL ENGINEERING; PLASTIC DEFORMATION; PLASTICITY; SHEAR BANDS; THREE DIMENSIONAL;

BIFURCATION; DEFORMATION MECHANISM; GRANULAR MEDIUM; PLASTIC DEFORMATION; PLASTICITY; SHEAR BAND; SOIL; THREE-DIMENSIONAL MODELING; TWO-DIMENSIONAL MODELING;

EID: 41049090429     PISSN: 07339399     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9399(2008)134:4(322)     Document Type: Article

References (23)

1. Alshibli, K. A., Batiste, S. N., and Sture, S. (2003). "Strain localization in sand: Plane strain versus triaxial compression." J. Geotech. Geoenviron. Eng. JGGEFK1090-024110.1061/ (ASCE)1090-0241(2003)129:6(483), 129(6), 483-494.
2. Arthur, J. R. F., Chua, K. S., and Dunstan, T. (1977). "Induced anisotropy in a sand." Geotechnique GTNQA80016-8505, 27(1), 613-622.
3. Bardet, J. P. (1991). "A comprehensive review of strain localization in elastoplastic soils." Comput. Geotech. ZZZZZZ0266-3524, 11, 163-188.
4. Budiansky, B. (1959). "A reassessment of deformation theories of plasticity." J. Appl. Mech. JAMCAV0021-8936, 26, 259-264.
5. Chu, J., Lo, S. C. R., and Lee, I. K. (1996). "Strain softening and shear band formation of sand in multi-axial testing." Geotechnique GTNQA80016-8505, 46(1), 63-82.
6. Desrues, J., Lanier, J., and Stutz, P. (1985). "Localization of the deformation in tests on sand sample." Eng. Fract. Mech. EFMEAH0013-794410.1016/0013-7944(85)90097-9, 21(4), 909-921.
7. Gutierrez, M., Ishihara, K., and Towhata, I. (1991). "Flow theory for sand during rotation of principal stress direction." Soils Found. SOIFBE0038-0806, 31(4), 121-132.
8. Hammad, W. (1991). "Modélisation non linéaire et étude expérimentale des bandes de cisaillement dans les sables." Thèse de Doctorat, l'Univ. J. Fourier, Grenoble, France.
9. Han, C., and Drescher, A. (1993). "Shear bands in biaxial tests on dry coarse sand." Soils Found.SOIFBE0038-0806, 33(1), 118-132.
10. Ishihara, K., and Towhata, I. (1983). "Sand response to cyclic rotation of principal stress directions as induced by wave loads." Soils Found.SOIFBE0038-0806, 23(4), 11-26.
11. Mooney, M. A., Finno, R. J., and Viggiani, M. G. (1998). "A unique critical state for sand?" J. Geotech. Geoenviron. Eng. JGGEFK1090-024110.1061/(ASCE)1090-0241(1998)124:11(1100), 124(11), 1100-1108.
12. Ottossen, N. S., and Runesson, K. (1991). "Properties of discontinuous bifurcations in elasto-plasticity." Int. J. Solids Struct. IJSOAD0020-768310.1016/0020-7683(91)90131-X, 27(4), 401-421.
13. Papamichos, E., and Vardoulakis, I. (1995). "Shear band formation in sand according to noncoaxial plasticity model." Geotechnique GTNQA80016-8505, 45(4), 649-661.
14. Pietruszczak, S., and Stolle, D. F. E. (1987). "Modelling of sand behavior under earthquake excitation." Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-9061, 11, 221-240.
15. Pradel, D., Ishihara, K., and Gutierrez, M. (1990). "Yielding and flow of sand under principal axes rotation." Soils Found. SOIFBE0038-0806, 30(1), 87-89.
16. Rice, J. R., and Rudnicki, J. W. (1980). "A note on some features of theory of the localization of deformation." Int. J. Solids Struct. IJSOAD0020-7683, 16, 507-605.
17. Rudnicki, J. W., and Rice, J. R. (1975). "Conditions for the localization of the deformation in pressure sensitive dilatant materials." J. Mech. Phys. Solids JMPSA80022-509610.1016/ 0022-5096(75)90001-0, 23, 371-394.
18. Vardoulakis, I. (1980). "Shear band inclination and shear modulus of sand in biaxial tests." Int. J. Numer. Analyt. Meth. Geomech.IJNGDZ0363-906110.1002/nag.1610040202, 4, 103-119.
19. Vardoulakis, I., and Graf, B. (1985). "Calibration of constitutive models for granular materials using data from biaxial experiments." Geotechnique GTNQA80016-8505, 35(3), 299-317.
20. Vermeer, P. A. (1982). "A simple shear band analysis using compliances." Proc., IUTAM Conf. on Deformation and Failure of Granular Materials, Balkema, Rotterdam, The Netherlands, 439-499.
21. Wang, Q., and Lade, P. V. (2001). "Shear banding in true triaxial tests and its effect on failure in sand." J. Eng. Mech. JENMDT0733-939910.1061/(ASCE)0733-9399(2001)127:8(754), 127(8), 754-761.
22. Yamamuro, J. A., and Shapiro, S. (2002). "Failure and shear band in three-dimensional experiments on loose silty sands." Proc., 15th Engineering Mechanics Conf., ASCE, Reston, Va.
23. Yang, Z. X., Li, X. S., and Yang, J. (2007). "Undrained anisotropy and rotational shear in granular soil." Geotechnique GTNQA80016-8505, 57(4), 371-384.