Large-scale experimental verification of semiactive control through real-time hybrid simulation

Journal of Structural Engineering

Volumn 134, Issue 4, 2008, Pages 522-534

  Christenson, Richard ^a   Lin, Yi Zhong ^a   Emmons, Andrew ^b   Bass, Brent ^c  

^a UNIVERSITY OF CONNECTICUT   (United States)

^b Martin Martin Inc   (United States)

^c SIMPSON GUMPERTZ AND HEGER INC   (United States)

Author keywords

Hybrid methods; Seismic analysis; Simulation; Structural control

Indexed keywords

HYBRID METHODS; MAGNETO-RHEOLOGICAL (MR) FLUID DAMPERS; SEISMIC ANALYSIS;

CIVIL ENGINEERING; COMPUTER SIMULATION; COST EFFECTIVENESS; EARTHQUAKE EFFECTS; REAL TIME SYSTEMS;

FLUIDS;

EID: 40849134192     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9445(2008)134:4(522)     Document Type: Article

References (56)

1. Adams, R. J., Moreyra, M. R., and Hannaford, B. (1998). " Stability and performance of Haptic displays: Theory and experiments.." Proc., ASME Int. Mechanical Engineering Congress and Exhibition, Anaheim. Calif., 227-234.
2. Arioui, H., Kheddar, and A., Mammar, S. (2003). " A model-based controller for interactive delayed Haptic feedback virtual environments.." J. Intell. Robotic Syst. JIRSES 0921-0296 10.1023/A:1024106504729, 37, 193-207.
3. Bass, B. J., and Christenson, R. E. (2007). " System identification of a 200 kN, Magneto-Rheological fluid damper for structural control in large-scale smart structures.." Proc., American Control Conf., New York,.
4. Blakeborough, A., Williams, M. S., Darby, A. P., and Williams, D. M. (2001). " The development of real-time substructure testing.." Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 359 (1786), 1869-1891.
5. Carrion, J. E., and Spencer, B. F., Jr. (2006). " Real-time hybrid testing using model-based delay compensation.." Proc., 4th Int. Conf. on Earthquake Engineering, Taipei, Taiwan, No. 299.
6. Chang, C. C., and Roschke, P. (1998). " Neural network modeling of a magnetorheological damper.." J. Intell. Mater. Syst. Struct. JMSSER 1045-389X, 9, 755-764.
7. Chang, S. Y. (1997). "Improved numerical dissipation for explicit methods in pseudodynamic tests." Earthquake Eng. Struct. Dyn., 26, 917-929
8. Chang, S. Y. (2002). " Explicit pseudodynamic algorithm with unconditional stability.." J. Eng. Mech. JENMDT 0733-9399 10.1061/(ASCE)0733-9399(2002)128:9(935), 128 (9), 935-947.
9. Christenson, R. E., and Emmons, A. T. (2005). " Semiactive structural control of a nonlinear building model: Considering reliability.." Proc., Structures Congress 2005: Session on Semiactive Control of Civil Structures, ASCE, Reston, Va.
10. Colgate, J. E. (1994). " Coupled stability of multiport systems-theory and experiments.." J. Dyn. Syst., Meas., Control JDSMAA 0022-0434, 116 (3), 419-428.
11. Colgate, J. E., and Hogan, N. (1998). " Robust control of dynamically interacting systems.." Int. J. Control IJCOAZ 0020-7179 10.1080/00207178808906161, 48 (1), 65-88.
12. Colgate, J. E., Stanley, M. C., and Brown, J. M. (1995). " Issues in the haptic display of tool use.." IROS, 3 (), 140-145.
13. Darby, A. P., Blakeborough, A., and Williams, M. S. (1999). " Real-time substructure tests using hydraulic actuator.." J. Eng. Mech. JENMDT 0733-9399 10.1061/(ASCE)0733-9399(1999)125:10(1133), 125 (10), 1133-1139.
14. Darby, A. P., Blakeborough, A., and Williams, M. S. (2001). " Improved control algorithm for real-time substructure testing.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847 10.1002/eqe.18, 30, 431-448.
15. Darby, A. P., Williams, M. S., and Blakeborough, A. (2002). " Stability and delay compensation for real-time substructure testing.." J. Eng. Mech. JENMDT 0733-9399 10.1061/(ASCE)0733-9399(2002)128:12(1276), 128 (12), 1276-1284.
16. Dimig, J., Shield, C., French, C., Bailey, F., and Clark, A. (1999). " Effective force testing: A method of seismic simulation for structural testing.." J. Struct. Eng. JSENDH 0733-9445 10.1061/(ASCE)0733-9445(1999) 125:9(1028), 125 (9), 1028-1037.
17. Dyke, S. J., Spencer, B. F., Jr., Quast, P., and Sain, M. K. (1995). " Role of control-structure interaction in protective system design.." J. Eng. Mech. JENMDT 0733-9399 10.1061/(ASCE)0733-9399(1995)121:2(322), 121 (2), 322-338.
18. Dyke, S. J., Spencer, B. F., Jr., Sain, M. K., and Carlson, J. D. (1997). " An experimental study of MR dampers for seismic protection.." Smart Mater. Struct. SMSTER 0964-1726, 7, 693-703.
19. Flemmer, H., and Wikander, J. (2003). " Transparency and stability analysis of a surgical teleoperator system.." Proc., 11th Haptics Symp., Los Angeles,.
20. Gamota, D. R., and Filisko, F. E. (1991). " Dynamic mechanical studies of electrorheological materials: Moderate frequencies.." J. Rheol. JORHD2 0148-6055 10.1122/1.550221, 35 (3), 399-425.
21. Gavin, H. P. (2001). " Multi-duct ER dampers.." J. Intell. Mater. Syst. Struct. JMSSER 1045-389X, 12 (5), 353-366.
22. Horiuchi, T., Inoue, M., Konno, T., and Yamagishi, W. (1999). " Development of a real-time hybrid experimental system using a shaking table (proposal of experimental concept and feasibility study with rigid secondary system).." JSME Int. J., Ser. C JCDMEY 1340-8062, 42 (2), 255-264.
23. Horiuchi, T., and Konno, T. (2001). " A new method for compensating actuator delay in real-time hybrid experiments.." Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 359 (1786), 1893-1909.
24. Housner, G. W., Soong, T. T., and Masri, S. F. (1994). " Second generation of active structural control in civil engineering.." Proc., 1st World Conf. on Structural Control, Pasadena, Calif., 3-18.
25. Johnson, E. A., Ramallo, J. C., Spencer, B. F., Jr., and Sain, M. K. (1998). " Intelligent base isolation systems.." Proc., 2nd World Conf. on Structural Control (2WCSC), Vol. 1, Kyoto, Japan, 367-376.
26. Kyrychko, Y. N., Blyuss, K. B., Gonzalez-Buelga, A., Hogan, S. J., and Wagg, D. J. (2006). " Real-time dynamic substructuring in a coupled oscillator-pendulum system.." Proc., of the Royal Society, 462, 1271-1294.
27. Lord Corporation. (2006). " Lord Corporation-Adhesives, coatings, vibration, shock and motion control.." 〈http://www.lord.com〉 (January 23, 2008).
28. Magonette, G. (2001). " Development and application of large-scale continuous pseudo-dynamic testing techniques.." Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 359, 1771-1799.
29. Mahin, S. A., and Shing, P. B. (1985). " Pseudodynamic method for seismic performance testing.." J. Struct. Eng. JSENDH 0733-9445, 111 (7), 1482-1503.
30. Mahin, S. A., Shing, P.-S., Thewalt, C. R., and Hanson, R. D. (1989). " Pseudodynamic test method-Current status and future directions.." J. Struct. Eng. JSENDH 0733-9445, 115 (8), 2113-2128.
31. MATLAB. (2005). The Mathworks, Inc, Natick, Mass.
32. Mercan, O., and Ricles, J. M. (2007). " Stability and accuracy analysis of outer loop dynamics in real-time pseudodynamic testing of SDOF systems.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847, in press.
33. Mosqueda, G., Stojadinovic, B., Hanley, J., Sivaselvan, M., and Reinhorn, A. (2006). " Fast hybrid simulation with geographically distributed substructures.." Proc., 17th Analysis and Computation Specialty Conf., St. Louis,.
34. Nakashima, M. (2001). " Development, potential, and limitations of real-time online (pseudo-dynamic) testing.." Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 359 (1786), 1851-1867.
35. Nakashima, M., Kaminosono, T., Ishida, I., and Ando, K. (1990). " Integration techniques for substructure pseudodynamic test.." Proc., 4th U.S. National Conf. on Earthquake Engineering, Vol. 2, EERI, Palm Springs, Calif.
36. Nakashima, M., and Masaoka, N. (1999). "Real-time on-line test for MDOF systems." Earthquake Eng. Struct. Dyn., 28, 393-420.
37. NEES Incorporated. (1999). " NEES large-scale testing facilities.." 〈http://www.nees.org/Research_Sites/LargeScaleLabs/ 〉 (January 23, 2008).
38. Ohtori, Y., Christenson, R. E., Spencer, B. F., Jr., and Dyke, S. J. (2004). " Benchmark control problems for seismically excited Nonlinear buildings.." J. Eng. Mech. JENMDT 0733-9399 10.1061/(ASCE)0733-9399(2004) 130:4(366), 130 (4), 366-385.
39. OpenSees. (2005). University of California Berkeley and Pacific Earthquake Engineering Research Center, 〈 http://opensees.berkeley.edu/ OpenSees 〉.
40. Ruspini, D. C., Kolarov, K., and Khatib, O. (1997). " The Haptic display of complex graphical environments.." Proc., Computer Graphics SIGGRAPH '97, Los Angeles, 345-352.
41. Shing, P. B., and Mahin, S. A. (1987a). " Cumulative error effects in pseudodynamic tests.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847 10.1002/eqe.4290150402, 15, 409-424.
42. Shing, P. B., and Mahin, S. A. (1987b). " Elimination of spurious higher-mode response in pseudodynamic tests.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847 10.1002/eqe.4290150403, 15, 425-445.
43. Smith, O. (1959). " A controller to overcome dead time.." ISA J. ISAJA5 0096-0810, 6 (2), 28-33.
44. Soong, T. T., and Spencer, B. F., Jr. (2002). " Supplemental energy dissipation: State-of-the-art and state-of-the-practice.." Eng. Struct. ENSTDF 0141-0296 10.1016/S0141-0296(01)00092-X, 24, 243-259.
45. Spencer, B. F., Jr., Dyke, S. J., Sain, M. K., and Carlson, J. D. (1997). " Phenomenological model of magnetorheological damper.." J. Eng. Mech. JENMDT 0733-9399 10.1061/(ASCE)0733-9399(1997)123:3(230), 123 (3), 230-238.
46. Spencer, B. F., Jr., and Sain, M. K. (1997). " Controlling buildings: A new frontier in feedback.." IEEE Control Syst. Mag. ISMAD7 0272-1708 10.1109/37.642972, 17, 19-35.
47. Stauffer, E. (2006). " The CU-boulder fast hybrid test: Integration schemes for fast hybrid testing.." Internal Rep. No. CU-NEES-06-8, Dept. of Civil Environmental and Architectural Engineering, Univ. of Colorado at Boulder, Boulder, Colo.
48. Thewalt, C. R., and Mahin, S. A. (1995). " Unconditionally stable hybrid pseudodynamic algorithm.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847 10.1002/eqe.4290240508, 24, 723-731.
49. Wallace, M. I., Sieber, J., Neild, S. A., Wagg, D. J., and Krauskopf, B. (2005). " Stability analysis of real-time dynamic substructuring using delay differential equation models.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847 10.1002/eqe.513, 34, 1817-1832.
50. Wallen, R., and Deol, R. (2008). " NEES @ University of Colorado.." 〈http://nees.colorado.edu〉 (January 23, 2008).
51. Wei, Z. (2005). " Fast hybrid test system for substructure evaluation.." Ph.D dissertation, Univ. of Colorado, Boulder, Colo.
52. Williams, M. S., and Blakeborough, A. (2001). " Laboratory testing of structures under dynamic loads: An introductory review.." Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 359, 1651-1669.
53. Wu, B., Xu, G., Wang, Q., and Williams, M. S. (2006). " Operator-splitting method for real-time substructure testing.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847 10.1002/eqe.519, 35, 293-314.
54. Yang, G. (2001). " Large-scale magnetorheological fluid damper for vibration mitigation: modeling, testing and control.." Ph.D thesis, Univ. of Notre Dame, South Bend, Ind.
55. Zhao, J., French, C., Shield, C., and Posbergh, T. (2003). " Considerations for the development of real-time dynamic testing using servo-hydraulic actuation.." Earthquake Eng. Struct. Dyn. IJEEBG 0098-8847 10.1002/eqe.301, 32, 1773-1794.
56. Zilles, C. B., and Salisbury, J. K. (1995). " A constraint-based God-object method for haptic display.." Proc., of IEEE/RSJ Int. Conf. Intel Robots Systems, Pittsburgh, 146-151.