Erratum to "Microstructure evolution in dry-wet cast polysulfone membranes by Cryo-SEM: A hypothesis on macrovoid formation" [J. Membr. Sci. 313 (2008) 135-157] (DOI:10.1016/j.memsci.2008.01.006);Microstructure evolution in dry-wet cast polysulfone membranes by cryo-SEM: A hypothesis on macrovoid formation

Journal of Membrane Science

Volumn 313, Issue 1-2, 2008, Pages 135-157

  Prakash, Sai S ^a   Francis, Lorraine F ^a   Scriven, L E ^a  

^a University of Minnesota   (United States)

Author keywords

Dry wet cast asymmetric membrane; Failure; Macrovoid; Microstructure evolution; Phase separation; Polysulfone; Stress; Time sectioning cryo SEM

Indexed keywords

MICROSTRUCTURE; POLYSULFONES; SCANNING ELECTRON MICROSCOPY; SEPARATION; TENSILE STRESS;

DRY-WET CAST ASYMMETRIC MEMBRANE; MACROVOID FORMATION; MICROSTRUCTURE EVOLUTION;

POLYMERIC MEMBRANES;

COAGULATING AGENT; POLYMER; POLYSULFONE;

MICROSTRUCTURE; POLYMERIC MEMBRANES; POLYSULFONES; SCANNING ELECTRON MICROSCOPY; SEPARATION; TENSILE STRESS;

ARTICLE; ARTIFICIAL MEMBRANE; COMPRESSION; CRYOGENIC SCANNING ELECTRON MICROSCOPY; DISPERSION; IMMERSION; MATERIAL COATING; MATHEMATICAL ANALYSIS; MEMBRANE STRUCTURE; PHASE SEPARATION; PRESSURE; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; THICKNESS;

EID: 40849097304     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2008.04.001     Document Type: Erratum

References (51)

1. Prakash S.S., Francis L.F., and Scriven L.E. Microstructure evolution in dry cast cellulose acetate membranes by cryo-SEM. J. Membr. Sci. 283 1-2 (2006) 328
2. Pesek S.C., and Koros W.J. Aqueous quenched asymmetric polysulfone membranes prepared by dry/wet phase separation. J. Membr. Sci. 81 1-2 (1993) 71
3. S.S. Prakash, The origins of microstructure in phase inversion coatings or membranes: snapshots of the transient from time-sectioning cryo-SEM, Ph.D. Thesis, University of Minnesota, Minneapolis, MN, 2001.
4. Kotina V.E., and Shelepen I.N. Tekst. Prom-St. 4 (1957) 17 (in Russian)
5. Gröbe V., and Meyer K. Faserforsch. Textiltech. 10 5 (1959) 214
6. Gröbe V., Mann G., and Duwe G. Faserforsch. Textiltech. 17 4. (1966) 142 (in German)
7. Matz R. The structure of cellulose acetate membranes. I. The development of porous structures in anisotropic membranes. Desalination 10 (1972) 1
8. Zeman L., and Fraser T. Formation of air-cast cellulose acetate membranes. Part I. Study of macrovoid formation. J. Membr. Sci. 84 (1993) 93
9. Zeman L., and Fraser T. Formation of air-cast cellulose acetate membranes. Part II. Kinetics of demixing and microvoid growth. J. Membr. Sci. 87 (1994) 267
10. Shojaie S.S., Krantz W.B., and Greenberg A.R. Dense polymer film and membrane formation via the dry-cast process. Part I. Model development. J. Membr. Sci. 94 (1994) 255
11. Shojaie S.S., Krantz W.B., and Greenberg A.R. Dense polymer film and membrane formation via the dry-cast process. Part II. Model validation and morphological studies. J. Membr. Sci. 94 (1994) 281
12. Berghmans S., Berghmans H., and Meijer H.E.H. Spinning of hollow porous fibers via the TIPS mechanism. J. Membr. Sci. 116 2 (1996) 171
13. Frommer M.A., and Lancet D. The mechanism of membrane formation: membrane structures and their relation to preparation conditions. In: Lonsdale H.K., and Podall H.E. (Eds). Reverse Osmosis Membrane Research (1972), Plenum Press, New York, NY 85
14. Frommer M.A., and Messalem R.M. Mechanism of membrane formation. VI. Convective flows and large void formation during membrane precipitation. Ind. Eng. Chem., Prod. Res. Dev. 12 4 (1973) 328
15. Strathmann H., Kock K., Amar P., and Baker R.W. The formation mechanism of asymmetric membranes. Desalination 16 (1975) 179
16. Strathmann H. Production of microporous media by phase inversion processes. In: Lloyd D.R. (Ed). Materials Science of Synthetic Membranes, ACS Symposium Series 269 (1985), American Chemical Society, Washington, DC 165
17. Smolders C.A. Morphology of skinned membranes: a rationale from phase separation phenomena. In: Cooper A.R. (Ed). Ultrafiltration Membranes and Applications (1980), Plenum Press, New York, NY 161
18. Smolders C.A., Reuvers A.J., Boom R.M., and Wienk I.M. Microstructures in phase inversion membranes. Part 1. Formation of macrovoids. J. Membr. Sci. 73 (1992) 259
19. Pinnau I., and Koros W.J. Structures and properties of asymmetric polysulfone membranes made by dry, wet and dry/wet phase inversion. J. Appl. Polym. Sci. 43 8 (1991) 1491
20. Han M.-J., and Bhattacharya D. Morphology and transport study of phase inversion polysulfone membranes. Chem. Eng. Commun. 128 (1994) 197
21. Yamasaki A., Tyagi R.K., Fouda A.E., Matsuura T., and Jonasson K. Effect of solvent evaporation conditions on gas separation performance for asymmetric polysulfone membranes. J. Appl. Polym. Sci. 71 (1999) 1367
22. Koros W.J. Membranes: learning a lesson from nature. Chem. Eng. Prog. 91 10 (1995) 68
23. Koros W.J. Speech at Special Symposium in Honor of the Loeb-Sourirajan Membrane, AIChE Annual Meeting. Los Angeles, CA (2000)
24. Wijmans J.G., Kant J., Mulder M.H.V., and Smolders C.A. Phase separation phenomena in solutions of polysulfone in mixtures of a solvent and a nonsolvent: relationship with membrane formation. Polymer 26 (1985) 1539
25. Gaides G.E., and McHugh A.J. Gelation in an amorphous polymer: discussion in relation to membrane formation. Polymer 30 (1989) 2118
26. Kim J.Y., Lee H.K., Baik K.J., and Kim S.C. Liquid-liquid phase separation in polysulfone/solvent/water systems. J. Appl. Polym. Sci. 65 (1997) 2643
27. Zasadzinski J.A.N. A new heat transfer model to predict cooling rates for rapid freezing fixation. J. Microsc. 150 2 (1988) 137
28. Bailey S.M., and Zasadzinski J.A.N. Validation of convection-limited cooling of samples for freeze-fracture electron microscopy. J. Microsc. 163 3 (1991) 307
29. Engel L. Atlas of Polymer Damage: Surface Examination by Scanning Electron Microscope (1981), Prentice Hall, Englewood Cliffs, NJ
30. A. Limbert, Microstructure development in coatings by cryogenic scanning electron microscopy, M.S. Thesis, University of Minnesota, Minneapolis, MN, 1996.
31. Scriven L.E. Equilibrium bicontinuous structure. Nature 263 (1976) 123
32. Anderson D.M., Davis H.T., Nitsche J.C.C., and Scriven L.E. Periodic surfaces of prescribed mean curvature. Adv. Chem. Phys. 77 (1990) 337
33. Dabral M., Francis L.F., and Scriven L.E. Drying process paths of ternary polymer solution coating. AIChE J. 48 1 (2002) 25
34. M. Dabral, Solidification of coatings: theory and modeling of drying, curing and microstructure growth, Ph.D. Thesis, University of Minnesota, Minneapolis, MN, 1999.
35. Cairncross R.A., Schunk P.R., Chen K.S., Samuel J., Prakash S.S., Hurd A.J., and Brinker C.J. Pore evolution and solvent transport during drying of gelled sol-to-gel coatings: predicting springback. Drying Tech. 15 6-8 (1997) 1815
36. Garg S.K., and Nur A. Effective stress laws for fluid saturated porous rocks. J. Geophys. Res. 78 (1973) 5911
37. P. Pathak, H.T. Davis, L.E. Scriven, Dependence of residual non-wetting liquid on pore topology, Soc. Pet. Eng. AIME, Pap. SPE-11016:57, 1982, p. 1.
38. Hubbert M.K., and Willis D.G. Mechanics of hydraulic fracturing. Trans. AIME 210 (1957) 153
39. Craig J.P., Knudsen J.P., and Holland V.F. Characterization of acrylic fiber structure. Textile Res. J. 32 6 (1962) 435
40. Sternling C.V., and Scriven L.E. Interfacial turbulence: hydrodynamic instability and the Marangoni effect. AIChE J. 5 4 (1959) 514
41. Cabasso I., Klein E., and Smith J.K. Polysulfone hollow fibers. II. Morphology. J. Appl. Polym. Sci. 21 (1977) 165
42. Broens L., Altena F.W., Smolders C.A., and Koenhen D.M. Asymmetric membrane structures as a result of phase separation phenomena. Desalination 32 (1980) 33
43. Ray R.J., Krantz W.B., and Sani R.L. Linear stability theory model for finger formation in asymmetric membranes. J. Membr. Sci. 23 (1985) 155
44. McKelvey S.A., and Koros W.J. Phase separation, vitrification, and the manifestation of macrovoids in polymeric asymmetric membranes. J. Membr. Sci. 112 (1996) 29
45. Pekny M.R., Zartman J., Greenberg A.R., Krantz W.B., and Todd P. Influence of buoyancy and surfactant solutes on macrovoid defect formation in dry-cast cellulose acetate membranes. Polym. Preprints 41 1 (2000) 1060
46. Stropnik C., and Kaiser V. Polymeric membranes preparation by wet phase separation: mechanisms and elementary processes. Desalination 145 (2002) 1
47. Tsay C.S., and McHugh A.J. Mass transfer modeling of asymmetric membrane formation. J. Polym. Sci.: Polym. Phys. Ed. 28 (1990) 1327
48. Biot M.A. General theory of three-dimensional consolidation. J. Appl. Phys. 12 (1941) 155
49. Brinker C.J., and Scherer G.W. Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing (1990), Academic Press, San Diego, CA
50. Vaessen D.M., McCormick A.V., and Francis L.F. Effects of phase separation on stress development in polymeric coatings. Polymer 43 8 (2002) 2267
51. Erratum to "Effects of phase separation on stress development in polymeric coatings", Polymer 44:11 (2003) 3429.