-
3
-
-
0029341267
-
Application of diamond-coated cutting tools
-
Kanda K., Takehana S., Yoshida S., Watanaba R., and Takano S. Application of diamond-coated cutting tools. Surface and Coatings Technology 73 (1995) 111-115
-
(1995)
Surface and Coatings Technology
, vol.73
, pp. 111-115
-
-
Kanda, K.1
Takehana, S.2
Yoshida, S.3
Watanaba, R.4
Takano, S.5
-
4
-
-
0037166529
-
Development of high performance diamond-coated drills for cutting high silicon aluminum alloy
-
Hanyu H., Kamiya S., Odagi H., Muralkami Y., and Saka M. Development of high performance diamond-coated drills for cutting high silicon aluminum alloy. Thin Solid Films 412 (2002) 129
-
(2002)
Thin Solid Films
, vol.412
, pp. 129
-
-
Hanyu, H.1
Kamiya, S.2
Odagi, H.3
Muralkami, Y.4
Saka, M.5
-
5
-
-
28944437916
-
Effect of test atmosphere on the tribological behaviour of the non-hydrogenated diamond-like carbon coatings against 319 aluminum alloy and tungsten carbide
-
Konca E., Cheng Y.-T., Weiner A.M., Dasch J.M., and Alpas A.T. Effect of test atmosphere on the tribological behaviour of the non-hydrogenated diamond-like carbon coatings against 319 aluminum alloy and tungsten carbide. Surface and Coatings Technology 200 (2005) 1783-1791
-
(2005)
Surface and Coatings Technology
, vol.200
, pp. 1783-1791
-
-
Konca, E.1
Cheng, Y.-T.2
Weiner, A.M.3
Dasch, J.M.4
Alpas, A.T.5
-
6
-
-
34548769338
-
The role of hydrogen atmosphere on the tribological behaviour of non-hydrogenated DLC coatings against aluminum
-
Konca E., Dasch J.M., and Alpas A.T. The role of hydrogen atmosphere on the tribological behaviour of non-hydrogenated DLC coatings against aluminum. Tribology Transactions 50 (2007) 178-186
-
(2007)
Tribology Transactions
, vol.50
, pp. 178-186
-
-
Konca, E.1
Dasch, J.M.2
Alpas, A.T.3
-
7
-
-
33750994619
-
Tribological behaviour of diamond-like-carbon (DLC) coatings against aluminum alloys at elevated temperatures
-
Ni W., Cheng Y.-T., Weiner A.M., and Perry T.A. Tribological behaviour of diamond-like-carbon (DLC) coatings against aluminum alloys at elevated temperatures. Surface and Coatings Technology 201 (2006) 3229-3234
-
(2006)
Surface and Coatings Technology
, vol.201
, pp. 3229-3234
-
-
Ni, W.1
Cheng, Y.-T.2
Weiner, A.M.3
Perry, T.A.4
-
8
-
-
32844470206
-
Elevated temperature tribological behaviour of non-hydrogenated diamond-like carbon coatings against 319 aluminum alloy
-
Konca E., Cheng Y.-T., Weiner A.M., Dasch J.M., and Alpas A.T. Elevated temperature tribological behaviour of non-hydrogenated diamond-like carbon coatings against 319 aluminum alloy. Surface and Coatings Technology 200 (2006) 3996-4005
-
(2006)
Surface and Coatings Technology
, vol.200
, pp. 3996-4005
-
-
Konca, E.1
Cheng, Y.-T.2
Weiner, A.M.3
Dasch, J.M.4
Alpas, A.T.5
-
9
-
-
0033548350
-
Cutting application of DLC, hard carbon and diamond films
-
Vandevelde T.C.S., Vandierendonck K., Van Stappen M., Du Mong W., and Perremans P. Cutting application of DLC, hard carbon and diamond films. Surface and Coatings Technology 113 (1999) 80-85
-
(1999)
Surface and Coatings Technology
, vol.113
, pp. 80-85
-
-
Vandevelde, T.C.S.1
Vandierendonck, K.2
Van Stappen, M.3
Du Mong, W.4
Perremans, P.5
-
10
-
-
0034282035
-
The cutting performance of diamond and DLC-coated cutting tools
-
Dai M., Zhou K., Yuan Z., Ding Q., and Fu Z. The cutting performance of diamond and DLC-coated cutting tools. Diamond and Related Materials 9 (2000) 1753-1757
-
(2000)
Diamond and Related Materials
, vol.9
, pp. 1753-1757
-
-
Dai, M.1
Zhou, K.2
Yuan, Z.3
Ding, Q.4
Fu, Z.5
-
11
-
-
1342290020
-
The use of soft/lubricating coatings when dry drilling BS L168 aluminium alloy
-
Coldwell H.L., Dewes R.C., Aspinwall D.K., Renevier N.M., and Teer D.G. The use of soft/lubricating coatings when dry drilling BS L168 aluminium alloy. Surface and Coatings Technology 177-178 (2004) 716-726
-
(2004)
Surface and Coatings Technology
, vol.177-178
, pp. 716-726
-
-
Coldwell, H.L.1
Dewes, R.C.2
Aspinwall, D.K.3
Renevier, N.M.4
Teer, D.G.5
-
12
-
-
28844470776
-
Performance of low-friction coatings in the dry drilling of automotive Al-Si alloys
-
Wain N., Thomas N.R., Hickman S., Wallbank J., and Teer D.G. Performance of low-friction coatings in the dry drilling of automotive Al-Si alloys. Surface and Coatings Technology 200 (2005) 1885
-
(2005)
Surface and Coatings Technology
, vol.200
, pp. 1885
-
-
Wain, N.1
Thomas, N.R.2
Hickman, S.3
Wallbank, J.4
Teer, D.G.5
-
13
-
-
31044441472
-
A comparison of five categories of carbon-based tool coatings for dry drilling of aluminum
-
Dasch J.M., Ang C.C., Wong C.A., Cheng Y.T., Weiner A.M., Lev L.C., and Konca E. A comparison of five categories of carbon-based tool coatings for dry drilling of aluminum. Surface and Coatings Technology 200 (2006) 2970-2977
-
(2006)
Surface and Coatings Technology
, vol.200
, pp. 2970-2977
-
-
Dasch, J.M.1
Ang, C.C.2
Wong, C.A.3
Cheng, Y.T.4
Weiner, A.M.5
Lev, L.C.6
Konca, E.7
-
14
-
-
7444239033
-
Tribological properties of graphite-like and diamond-like carbon coatings
-
Field S.K., Jarratt M., and Teer D.G. Tribological properties of graphite-like and diamond-like carbon coatings. Tribology International 37 (2004) 949-956
-
(2004)
Tribology International
, vol.37
, pp. 949-956
-
-
Field, S.K.1
Jarratt, M.2
Teer, D.G.3
-
15
-
-
1342290042
-
A study of the tribological behaviour of three carbon-based coatings, tested in air, water and oil environments at high loads
-
Stallard J., Mercs D., Jarratt M., Teer D.G., and Shipway P.H. A study of the tribological behaviour of three carbon-based coatings, tested in air, water and oil environments at high loads. Surface and Coatings Technology 177-178 (2004) 545-551
-
(2004)
Surface and Coatings Technology
, vol.177-178
, pp. 545-551
-
-
Stallard, J.1
Mercs, D.2
Jarratt, M.3
Teer, D.G.4
Shipway, P.H.5
-
16
-
-
84945867513
-
-
Oxford University Press, Oxford p. 476
-
Shaw M.C. Metal Cutting Principles (1984), Oxford University Press, Oxford p. 476
-
(1984)
Metal Cutting Principles
-
-
Shaw, M.C.1
-
17
-
-
0030124305
-
A study of the built-up edge in drilling with indexable coated carbide inserts
-
Venkatesh V.C., and Xue W. A study of the built-up edge in drilling with indexable coated carbide inserts. Journal of Materials Processing Technology 58 (1996) 379-384
-
(1996)
Journal of Materials Processing Technology
, vol.58
, pp. 379-384
-
-
Venkatesh, V.C.1
Xue, W.2
-
18
-
-
0019140365
-
Predicting the cutting conditions at which built-up edge disappear when machining plain carbon steels
-
Matthew P., and Oxley P.L.B. Predicting the cutting conditions at which built-up edge disappear when machining plain carbon steels. Annals of the CIRP 29 (1980) 11-16
-
(1980)
Annals of the CIRP
, vol.29
, pp. 11-16
-
-
Matthew, P.1
Oxley, P.L.B.2
|