Influence of phase modifiers on morphology and properties of thermoplastic elastomers prepared from ethylene propylene diene rubber and isotactic polypropylene

Polymer Engineering and Science

Volumn 48, Issue 3, 2008, Pages 477-489

  Chakraborty, Pinka ^a   Ganguly, Anirban ^a   Mitra, Suman ^a   Bhowmick, Anil K ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIC FORCE MICROSCOPY; BLOCK COPOLYMERS; ETHYLENE; POLYMER BLENDS; PROPYLENE; THERMOPLASTIC ELASTOMERS;

BINARY BLEND; ETHYLENE PROPYLENE DIENE RUBBER (EPDM); PHASE MODIFIERS;

POLYPROPYLENES;

EID: 40749151370     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.20984     Document Type: Article

References (44)

1. D.R. Paul and S. Newman, Eds., Polymer Blends, Vol. 1, Academic Press, New York, 15 (1978).
2. A.Y. Coran, "Thermoplastic Rubber-Plastic Blends," in Handbook of Elastomers: New Developments and Technology, A.K. Bhowmick and H.L Stephens, Eds., Marcel Dekker, New York, chapter 10, 265 (2001).
3. N.R. Legge, G. Holden, and H.E. Schroeder, Eds., Thermoplastic Elastomer: A Comprehensive Review, Hanser, Munich (1987).
4. L. Yu, W. Wang, and W. Xiac, Polym. Degrad. Stab., 86, 69 (2004).
5. B.M. Walker and C.P. Rader, Handbook of Thermoplastic Elastomers, 2nd ed., Van Nostrand Reinhold, New York, chapter 3 (1988).
6. A.Y. Coran and R.P. Patel, "Thermoplastic elastomers based on dynamically vulcanized elastomer-thermoplastic blends," in Thermoplastic Elastomers, 2nd ed., G. Holden, Ed., Hanser, New York, chapter 7, 153 (1996).
7. A.V. Machado and M. Van Duin, Polymer, 46, 6575 (2005).
8. W.G.F. Sengers, P. Sengupta, J.W.M. Noordermeer, S.J. Picken, and A.D. Gotsis, Polymer, 45, 8881 (2004).
9. F. Goharpey, H. Nazockdast, and A.A. Katbab, Polym. Eng. Sci., 45, 84 (2005).
10. B. Ohlsson, H. Hassander, and B. Törnell, Polym. Eng. Sci., 36, 501 (1996).
11. G. Naderi, P.G. Lafleur, and C. Dubois, Polym. Eng. Sci., 47, 207 (2007).
12. http://www.freedoniagroup.com/Thermoplastic-Elastomers.html Access date 11 May, 2007. In Thermoplastics Elastomers Conference TPE, 23-24, October, Cologne, Germany (2007).
13. D.R. Paul, Background and Perspective, Vol. 1, Academic Press, New York (1978).
14. M. Yamaguchi, H. Miyata, and K. Niua, J. Appl. Polym. Sci., 62, 87 (1996).
15. J.D. Patel, M. Maiti, K. Naskar, and A.K. Bhowmick, Rubber Chem. Technol., 78, 893 (2005).
16. S. Anandhan, P.P. De, S.K. De, and A.K. Bhowmick, J. Appl. Polym. Sci., 88, 1976 (2003).
17. A.K. Bhowmick and J.R. White, J. Mater. Sci., 37, 5141 (2002).
18. S. Chattopadhyay, T.K. Chaki, and A.K. Bhowmick, Rubber Chem. Technol., 74, 815 (2001).
19. D.K. Setua, C. Soman, A.K. Bhowmick, and G.N. Mathur, Polym. Eng. Sci., 42, 10 (2002).
20. A.K. Bhowmick and A. Jha, J. Nat. Rubber Res., 12, 215 (1997).
21. N.K. Dutta, A.K. Bhowmick, and N.R. Choudhury, "Thermoplastic elastomers," in Handbook of Thermoplastics, O. Olabisi, Ed., Marcel Dekker, New York, 349 (1996).
22. P. Nevatia, T.S. Banerjee, B. Dutta, A. Jha, A.K. Naskar, and A.K. Bhowmick, J. Appl. Polym. Sci., 83, 2035 (2002).
23. N.R. Choudhury, P.P. De, S.K. De, and A.K. Bhowmick, Thermoplastic Elastomer from Rubber-Plastic Blends, Ellis Horwood, New York, 71 (1990).
24. D.J. Synnott, D.F. Sheridan, and E.G. Kontos, "EPDM-polypropylene blends" in Thermoplastic Elastomer from Rubber-Plastic Blends, Ellis Horwood, New York, 71 (1990).
25. R.L. Arnold and C.P. Rader, Handbook of Plastics, Elastomers and Composites, 2nd ed., McGraw-Hill, New York (1992).
26. M.D. Ellul, Rubber Chem. Technol., 76, 202 (2003).
27. Y. Kim, W.J. Cho, C.S. Ha, and W. Kim, J. Polym. Eng. Sci., 35, 1592 (1995).
28. T.T.M. Phan, A.J. Denicola, and L.S. Schadler, J. Appl. Polym. Sci., 68, 1461 (1998).
29. B.C. Kim, S.S. Hwang, K.Y. Lim, and K.J. Yoon, J. Appl. Polym. Sci., 78, 1267 (2000).
30. C.S. Ha, Y.W. Cho, J.H. Go, and W.J. Cho, J. Appl. Polym. Sci., 77, 2777 (2000).
31. S. Wu, Polym. Eng. Sci., 27, 335 (1987).
32. L.H. Sperling, Polymeric Multicomponent Materials - An Introduction, Wiley, New York (1997).
33. E.H. Kerner, Proc. Phys. Soc. B, 69, 808 (1956).
34. B. Paul, Trans. AIME, 36, 218 (1960).
35. O. Ishai and L.J. Cohen, Int. J. Mech. Sci., 9, 539 (1967).
36. U.J. Counto, Magn. Concr. Res., 16, 129 (1964).
37. H.P. Klug and L.E. Alexandar, Eds., X-ray Diffraction and Procedures, 2nd ed., Wiley, NY (1974).
38. J.A. Brydson, Flow Properties of Polymer Melts, 2nd ed., George Godwin, London, 1 (1981).
39. G. Socrates, Ed., Infrared Characteristic - Group Frequencies, Wiley-Interscience, NY (1980).
40. J.E.H. Brandup, Ed., Polymer Handbook, 3rd ed., Wiley, USA (1989).
41. A.F.M. Barton, Handbook of Solubility Parameters and Other Cohesion Parameters, CRC Press, Boca Raton (1985).
42. P.A. Small, J. Appl. Chem., 3, 71 (1953).
43. J. Patel, M. Maiti, K. Naskar, and A.K. Bhowmick, Polym. Polym. Compos., 14, 515 (2006).
44. J. Noolandi and K.M. Hong, Macromolecules, 15, 482 (1982).