Commingled yarns - Processing aspects and tailored surfaces of polypropylene/glass composites

Composites Part A: Applied Science and Manufacturing

Volumn 39, Issue 4, 2008, Pages 612-623

  Mader E ^a   Rausch, J ^a   Schmidt, N ^a  

^a LEIBNIZ INSTITUTE OF POLYMER RESEARCH DRESDEN   (Germany)

Author keywords

A. Glass fibres; B. Interface interphase; C. Mechanical testing; D. Fibre conversion processes; Polymer fibres

Indexed keywords

DISTRIBUTION HOMOGENEITY; NANOSTRUCTURED INTERFACES; THERMAL SHRINKAGE; CONVERSION PROCESS; CROSS-SECTION GEOMETRY; FRACTURE MECHANISMS; INTERFACE/INTERPHASES; POLYMER FIBRES; TAILORED SURFACES; TRANSVERSE MECHANICAL PROPERTIES; UNIDIRECTIONAL COMPOSITES;

COMPOSITE MATERIALS; GEOMETRY; NANOSTRUCTURED MATERIALS; POLYPROPYLENES; TENSILE STRENGTH; GLASS FIBERS; MECHANICAL TESTING; SPINNING (FIBERS); YARN;

GLASS; FIBERS;

EID: 40749117993     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2007.07.011     Document Type: Article

References (34)

1. Svensson N., Shishoo R., and Gilchrist M. Manufacturing of composites from commingled yarns - a review. J Thermopl Compos Mater 11 1 (1998) 22-56
2. Ruan X.P., and Chou T.W. Experimental and theoretical studies of the elastic behaviour of knitted-fabric composites. Compos Sci Technol 56 12 (1996) 1391-1403
3. .
4. Wakeman M.D., Cain T.A., Rudd C.D., Brooks R., and Long A.C. Compression moulding of glass and polypropylene composites for optimised macro- and micro-mechanical properties - 1 commingled glass and polypropylene. Compos Sci Technol 58 12 (1998) 1879-1898
5. Alagirusamy R., and Ogale V. Commingled and air jet-textured hybrid yarns for thermoplastic composites. J Ind Textiles 33 4 (2004) 223-243
6. Hamada H., Maekawa Z., Ikegawa N., Matsuo T., and Yamane M. Influence of the impregnating property on mechanical properties of commingled yarn composites. Polym Compos 14 4 (1993) 308-313
7. Ye L., and Friedrich K. Mode I interlaminar fracture of co-mingled yarn based glass/polypropylene composites. Compos Sci Technol 46 2 (1993) 187-198
8. Ye L., and Friedrich K. Interlaminar fracture (model II) of commingled yarn-based GF/PP composites. J Mater Sci 28 3 (1993) 773-780
9. Mäder E., Bunzel U., and Schemme M. Langfaserverstärkte Thermoplaste - Herstellung und Eigenschaften. Technische Textilien/Technical Textiles 37 3 (1994) T11-T14
10. Offermann P., Wulfhorst B., and Mäder E. Hybridgarne für neuartige Verbundwerkstoffe aus Thermoplasten. Technische Textilien/Technical Textiles 38 2 (1995) 55-57
11. Shonaike G.O., Hamada H., Maekawa Z., Matsuda M., Yuba T., and Matsuo T. The influence of cooling conditions on the mechanical properties of commingled yarn composites. J Thermopl Compos Mater 9 1 (1996) 76-89
12. Stumpf H., Mäder E., Baeten S., Pisanikovski T., Zäh W., Eng K., et al. New thermoplastic composite preforms based on split-film warp-knitting. Compos Part A 29 12 (1998) 1511-1523
13. Mäder E., and Skop-Cardarella K. Tailored thermoplastic composites based on new hybrid yarns. Key Eng Mater 137 (1998) 24-31
14. Bogoeva-Gaceva G., Mäder E., and Queck H. Properties of glass fiber polypropylene composites produced from split-warp-knit textile preforms. J Thermopl Compos Mater 13 9 (2000) 363-377
15. Long A.C., Wilks C.E., and Rudd C.D. Experimental characterisation of the consolidation of a commingled glass/polypropylene composite. Compos Sci Technol 61 11 (2001) 1591-1603
16. Vendramini J., Bas C., Merle G., Boissonnat P., and Alberola N.P. Commingled poly(butylene terephthalate)/unidirectional glass fiber composites: Influence of the process conditions on the microstructure of poly(butylene terephthalate). Polym Compos 21 5 (2000) 724-733
17. Bernet N., Michaud V., Bourban P.E., and Månson J.A.E. Commingled yarn composites for rapid processing of complex shapes. Compos Part A 32 11 (2001) 1613-1626
18. Putnoki I., Moos E., and Karger-Kocsis J. Mechanical performance of stretched knitted fabric glass fibre reinforced poly(ethylene terephthalate) composites produced from commingled yarn. Plast Rubber Compos 28 1 (1999) 40-46
19. Lariviere D., Krawczak P., Tiberi C., and Lucas P. Hydrothermal ageing of GF/PP composites: when glass/polymer adhesion favours water entrapment. Polym Polym Compos 13 1 (2005) 27-35
20. Gao S.L., and Mäder E. Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites. Compos Part A 33 4 (2002) 559-576
21. Tong L., Mouritz A.P., and Bannister M. 3D fibre reinforced composites (2002), Elsevier Science, Oxford
22. Gao S.L., and Mäder E. Nanostructured coatings of glass fibers: Improvement of alkali resistance and mechanical properties. Acta Mater 55 3 (2007) 1043-1052
23. Report AiF-Nr. 322D (1993) Report AiF-Nr. 10039 B (1996) Report AiF-Nr. 11644B (2000), Leibniz-Institut für Polymerforschung Dresden e.V.
24. Online Hybridgarnspinnen von Glasfaser- und Thermoplastfilamenten. Annual Report Leibniz-Institute for Polymer Research Dresden e.V., 2005, p. 64.
25. Weibull W. A statistical distribution function of wide applicability. J Appl Mech - Trans ASME 18 3 (1951) 293-297
26. Zhandarov S., Pisanova E., and Mäder E. Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Part II. crack propagation: effect of friction on force-displacement curves. Compos Interface 7 3 (2000) 149-175
27. Nairn J.A. Analytical fracture mechanics analysis of the pull-out test including the effects of friction and thermal stresses. Adv Compos Lett 9 6 (2000) 373-383
28. Kaw A.K. Mechanics of composite materials (2006), CRC Press
29. Mäder E, Rothe C, Liu JW. Verbundwerkstoffe auf Basis von Hybridgarnen mit maßgeschneiderter Oberflächenmodifizierung. In: Proceedings of technomer conference. Chemnitz, Germany, November; 2005. p. 1-15.
30. Mäder E., Rothe C., and Gao S L. Commingled yarns of surface nanostructured glass and polypropylene filaments for effective composite properties. J Mater Sci 42 (2007) 8062-8070
31. Valentini L., Biagiotti J., Lopez-Manchado M., Santucci S., and Kenny J. Effects of carbon nanotubes on the crystallization behavior of polypropylene. Polymer Eng Sci 44 (2004) 303-311
32. Grady B., Pompeo F., Shambough R., and Resasco D. Nucleation of polypropylene crystallization by single-walled carbon nanotubes. J Phys Chem, Part B 106 (2002) 5852-5858
33. Seo M., Lee J., and Park S. Crystallization kinetics and interfacial behaviors of polypropylene composites reinforced with multi-walled carbon nanotubes. Mater Sci Eng A404 (2005) 79-84
34. Quan H., Li Z., Yang M., and Huang R. On transcrystallinity in semi-crystalline polymer composites. Compos Sci Technol 65 (2005) 999-1021