A one-dimensional lean NOx trap model with a global kinetic mechanism that includes NH3 and N2O

International Journal of Engine Research

Volumn 9, Issue 1, 2008, Pages 57-77

  Depcik, C ^a   Assanis, D ^a   Bevan, K ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b EATON CORPORATION   (United States)

Author keywords

Aftertreatment; Ammonia; Catalyst; Kinetics; Nitrogen oxides; Regeneration; Storage; Trap

Indexed keywords

AMMONIA; CATALYSTS; COMPUTER SIMULATION; KINETIC THEORY; NITROGEN OXIDES; SELECTIVE CATALYTIC REDUCTION;

AFTERTREATMENT SYSTEMS; FUEL REFORMER SYSTEMS;

DIESEL ENGINES;

EID: 40749084770     PISSN: 14680874     EISSN: 14680874     Source Type: Journal    
DOI: 10.1243/14680874JER01807     Document Type: Article

References (85)

1. Bevan, K. and Taylor III, W. Simulated performance of a diesel aftertreatment system for U.S. 2010 application. SAE paper 2006-01-3551, 2006.
2. x aftertreatment system for commercial vehicles. SAE paper 2006-01-3552, 2006.
3. Depcik, C. and Assanis, D. One-dimensional automotive catalyst modeling. Prog. Energy Combust. Sci., 2005, 31(4), 308-369.
4. Kuo, J. C., Morgan, C. R., and Lassen, H. G. Mathematical modeling of CO and HC catalytic converter systems. SAE paper 710289, 1971.
5. Vardi, J. and Biller, W. F. Thermal behavior of an exhaust gas catalytic converter. Ind. Engng Chem. - Process Des. Dev., 1968, 7(1), 83-90.
6. 3. J. Phys. Chem. B, 2001, 105, 6895-6906.
7. x trap desulfation by high frequency A/F modulation. SAE paper 2000-01-1201, 2000.
8. Hepburn, J., Kenney, T., McKenzie, J., Thanasiu, E., and Dearth, M. Engine and aftertreatment modeling for gasoline direct injection. SAE paper 982596, 1998.
9. x trap performance. SAE paper 962051, 1996.
10. Ingram, G. A. and Surnilla, G. On-line estimation of sulfation levels in a lean NOx trap. SAE paper 2002-01-0731, 2002.
11. x trap catalyst. SAE paper 2000-01-1199, 2000.
12. x trap model. SAE paper 2003-01-1164, 2003.
13. x storage compounds and differentiated washcoat. Chem. Engng J., 2004, 97(2-3), 131-139.
14. x storage-reduction catalysts - on the two effects of rich-spike duration. SAE paper 2001-01-1297, 2001.
15. x trap control by physically based model. SAE paper 1999-01-3503, 1999.
16. x traps. Ind. Engng Chem. Res., 2005, 44, 3021-3032.
17. Ye, Z. Temperature impact on modeling and control of lean NOx trap. SAE paper 2003-01-1163, 2003.
18. Kobayashi, T., Yamada, T., and Kayano, K. Study of NOx trap reaction by thermodynamic calculation. SAE paper 970745, 1997.
19. 3 model catalyst. Topics in Catal., 2004, 30/31, 161-168.
20. x adsorption and surface reaction on a commercial storage-reduction catalyst. J. Catal., 2003, 214, 308-316.
21. 3 catalysts. J. Phys. Chem., 2001, 105, 12732-12745.
22. 3 system. J. Mol. Catal. A: Chem., 2001, 165, 249-263.
23. Bailey, O. H. NOx adsorbers for diesel applications, 1997 (cited 2000 10/28/00). Available from: www.dieselnet.com/papers/9712bailey.html.
24. Kenji, K., Tokuta, I., Hidetaka, N., Kiyoshi, N., Satoshi, I., Tetsuro, K., and Hideaki, M. Exhaust emission control device in internal combustion engine. European Pat. W09312863, 1993.
25. 3. J. Phys. Chem. B, 2005, 109, 9613-9621.
26. Heywood, J. B. Internal combustion engine fundamentals, 1988 (McGraw-Hill, Inc., New York).
27. Cooper, B. J. and Thoss, J. E. Role of NO in diesel particulate emission control. SAE paper 890404, 1989.
28. 3. J. Catal., 2002, 210, 340-353.
29. Kandylas, I. P. and Koltsakis, G. C. Simulation of continuously regenerating diesel particulate filters in transient driving cycles. Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2002, 216(D), 591-606.
30. Siegl, W. O., Kaiser, E. W., Adamczyk, A. A., Guenther, M. T., DiCicco, D. M., and Lewis, D. A comparision of conversion efficiencies of individual hydrocarbon species across Pd- and Pt-based catalysts as a function of fuel-air ratio. SAE paper 982459, 1998.
31. Voltz, S. E., Morgan, C. R., Liederman, D., and Jacob, S. M. Kinetic study of carbon monoxide and propylene oxidation on platinum catalysts. Ind. Engng Chem. Product Res. Dev., 1973, 12, 294-301.
32. Li, Y., Roth, S., Yassine, M., Beutel, T., Dettling, J., and Sammer, C. Study of factors influencing the performance of a NOx trap in a light-duty diesel vehicle. SAE paper 2000-01-2911, 2000.
33. x storage catalyst. Appl. Catal. B: Environ., 2003, 46, 429-439.
34. x storage catalysts: influence of exposure conditions and noble metal. J. Catal., 2003, 217, 253-263.
35. x storage in barium-containing catalysts. J. Catal., 1999, 183, 196-209.
36. 3. Catal Today, 2002, 73, 263-270.
37. Olsson, L. and Andersson, B. Kinetic modelling in automotive catalysis. Topics in Catal., 2004, 28(1-4), 89-98.
38. Fischer, F. C. Device for removing carbon monoxide from exhaust gases, 1931. United States of America.
39. Franck-Philipson, A. Muffler for internal combustion engines, 1925. United States of America.
40. Frazer, J. C. W. Method of eliminating combustible constituents from the products of combustion of an internal-combustion engine, 1931. United States of America.
41. Thompson, C. E. and Bissell, R. E. Method of and apparatus for treating exhaust gases, 1926. United States of America.
42. Houdry, E. J. Catalytic apparatus for exhaust gas treatment, U.S.P. Office, 1957. United States of America.
43. Döbereiner, J. W. Zur Chemie des Platins in Wissenschaftlicher und Technischer Beziehung, 1836 (Balz'sche Buchhandlung, Stuttgart).
44. McDonald, D. Johann Wolfgang Döbereiner: the discovery of catalysis and the refining of Russian platinum. Platinum Metal Rev., 1965, 9, 136-139.
45. Dabill, D. W., Gentry, S. J., Holland, H. B., and Jones, A. The oxidation of hydrogen and carbon monoxide mixtures over platinum. J. Catal., 1978, 53, 164-167.
46. Oh, S. H. and Cavendish, J. C. Transients of monolithic catalytic converters: response to step changes in feedstream temperature as related to controlling automobile emissions. Ind. Engng Chem. Res., 1982, 21, 29-37.
47. Gross, G. P., Biller, W. F., Kearby, K. K., and Greene, D. F. Method of treating exhaust gases of internal combustion engines, U.S.P. Office, 1968. United States of America.
48. Jones, J. H., Kummer, J. T., Otto, K., Shelef, M., and Weaver, E. E. Selective catalytic reaction of hydrogen with nitric oxide in the presence of oxygen. Environ. Sci. Technol., 1971, 5, 790-798.
49. Bauerle, G. L., Service, G. R., and Nobe, K. Catalytic reduction of nitric oxide with carbon monoxide. Ind. Engng Chem. Product Res. Dev., 1972, 11(1), 54-58.
50. Lunt, R. S., Bernstein, L. S., Hansel, J. G., and Holt, E. L. Application of a Monel-platinum dual-catalyst system to automotive emission control. SAE paper 720209, 1972.
51. x emissions. In The catalytic chemistry of nitrogen oxides (Eds R. L. Klimisch and J. G. Larson), 1975 (Plenum Press, New York).
52. Gandhi, H. S., Piken, A. G., Stepien, H. K., Shelef, M., Delosh, R. G., and Heyde, M. E. Evaluation of three-way catalysts - part II. SAE paper 770196, 1977.
53. Montreuil, C. N., Williams, S. C., and Adamczyk, A. A. Modeling current generation catalytic converters: laboratory experiments and kinetic parameter optimization - steady state kinetics. SAE paper 920096, 1992.
54. Jobson, E., Smedler, G., Malmberg, P., Bernier, H., Hjortsberg, O., Gottberg, I., and Rosén, Å. Nitrous oxide formation over three-way catalyst. SAE paper 940926, 1994.
55. 2O) emission characteristics from automobiles. SAE paper 960061, 1996.
56. 2O increase due to catalyst deactivation. SAE paper 1999-01-1081, 1999.
57. Odaka, M., Koike, N., and Suzuki, H. Deterioration effect of three-way catalyst on nitrous oxide emission. SAE paper 980676, 1998.
58. Ramanathan, V., Cicerone, R. J., Singh, H. H., and Kiel, J. T. Trace gas trends and their potential role in climate change. J. Geophys. Res. - Atmos., 1985, 90, 5547-5566.
59. Bowman, K. P. Global trends in total ozone. Science, 1988, 239(4835), 48-50.
60. Callis, L. B. and Natarajan, M. Ozone and nitrogen-dioxide changes in the stratosphere during 1979-84. Nature, 1986, 323(6091), 772-777.
61. Weiss, R. F. The temporal and spatial-distribution of tropospheric nitrous-oxide. J. Geophys. Res. - Atmos., 1981, 86, 7185-7195.
62. Hightower, J. W. and van Leirsburg, D. A. Current status of the catalytic decomposition of NO. In The catalytic chemistry of nitrogen oxides (Eds R. L. Klimisch and J. G. Larson), 1975 (Plenum Press, New York).
63. Shelef, M., Otto, K., and Gandhi, H. S. The heterogeneous decomposition of nitric oxide on supported catalysts. Atmos. Environ., 1969, 3, 107-122.
64. 2O in engines exhaust gases - a first appraisal of catalyst impact. SAE paper 890492, 1989.
65. Ashmead, D. R., Campbell, J. S., Davies, P., and Farmery, K. Nitrogen oxide removal catalysts for purification of automobile exhaust gases. SAE paper 740249, 1974.
66. Kobylinski, T. P. and Taylor, B. W. The catalytic chemistry of nitric oxide II. Reduction of nitric oxide over noble metal catalysts. J. Catal., 1974, 33, 376-384.
67. Otto, K., Shelef, M., and Kummer, J. T. Studies of surface reactions of nitric oxide by nitrogen-15 isotope labeling. I. The reaction between nitric oxide and ammonia over supported platinum at 200-250°. J. Phys. Chem., 1970, 74(13), 2690-2698.
68. Kokes, R. J. The catalytic reduction of nitric and nitrous oxide. J. Phys. Chem., 1966, 70, 296-297.
69. Klimisch, R. L. and Taylor, K. C. Ammonia intermediacy as a basis for catalyst selection for nitric oxide reduction. Environ. Sci. Technol., 1973, 7(2), 127-131.
70. Shelef, M. and Gandhi, H. S. Ammonia formation in catalytic reduction of nitric oxide by molecular hydrogen. II. Noble metal catalysts. Ind. Engng Chem. Product Res. Dev., 1972, 11(4), 393-396.
71. Tsinoglou, D. N., Koltsakis, G. C., and Peyton Jones, J. C. Oxygen storage modeling in three-way catalytic converters. Ind. Engng Chem. Res., 2002, 41, 1152-1165.
72. x catalyst system for light duty diesel vehicles. SAE paper 952493, 1995.
73. Ayen, R. J. and Peters, M. S. Catalytic reduction of nitric oxide. Ind. Engng Chem. Process Des. Dev., 1962, 1(3), 204-207.
74. x reduction catalysts for vehicle emission control. SAE paper 720480, 1972.
75. Gandhi, H. S., Piken, A. G., Shelef, M., and Delosh, R. G. Laboratory evaluation of three-way catalysts. SAE paper 760201, 1976.
76. 2 and re-oxidation. SAE paper 780606, 1978.
77. Shamim, T., Shen, H., and Sengupta, S. Comparison of chemical kinetic mechanisms in simulating the emission characteristics of catalytic converters. SAE paper 2000-01-1953, 2000.
78. Burch, R. Knowledge and know-how in emission control for mobile applications. Catal. Rev., 2004, 46(3-4), 271-333.
79. Ohara, T. The catalytic reduction of nitric oxide over supported rhodium and copper nickel catalysts. In The catalytic chemistry of nitrogen oxides (Eds R. L. Klimisch and J. G. Larson), 1975 (Plenum Press, New York).
80. x storage-reduction catalyst and improvement of its performance. SAE paper 2000-01-1196, 2000.
81. x storage-reduction catalyst for automotive exhaust with improved tolerance against sulfur poisoning. Appl. Catal B: Environ., 2000, 25(2-3), 115-124.
82. x storage reduction catalyst for automotive direct-injection gasoline engine. Catalysts and Catal., 2000, 42(2), 65-66.
83. Koltsakis, G. C. and Stamatelos, A. M. Modeling dynamic phenomena in 3-way catalytic converters. Chem. Engng Sci., 1999, 54, 4567-4578.
84. 3. J. Phys. Chem. B, 2001, 105(29), 6895-6906.
85. Olsson, L. and Andersson, B. Kinetic modelling in automotive catalysis. Topics in Catal., 2004, 28(1), 89-98.