Modeling of the degradation of elastic properties due to the evolution of ductile damage

International Journal of Damage Mechanics

Volumn 17, Issue 2, 2008, Pages 149-172

  Wallin, Mathias ^a   Olsson, Mattias ^a   Ristinmaa, Matti ^a  

^a LUND UNIVERSITY   (Sweden)

Author keywords

Damage mechanics; Ductile void growth; Thermodynamics

Indexed keywords

CONSTITUTIVE EQUATIONS; DUCTILITY; ELASTOPLASTICITY; FINITE ELEMENT METHOD; FREE ENERGY; VOID FRACTION; VOLUME FRACTION;

DUCTILE VOID GROWTH; SCALAR EQUATIONS;

CONTINUUM DAMAGE MECHANICS;

EID: 40649100125     PISSN: 10567895     EISSN: 15307921     Source Type: Journal    
DOI: 10.1177/1056789506069468     Document Type: Article

References (43)

1. Andersson, H. (1977). Analysis of a Model for Void Growth and Coalescence Ahead of a Moving Crack Tip, J. Mech. Phys. Solids, 25(3): 217-233.
2. Aravas, N. (1987). On the Numerical Integration of a Class of Pressure-dependent Plasticity Models, Int. J. Numer. Meth. Engng, 24(7): 1395-1416.
3. Baz ant, Z. and Lin, F. (1988). Non-local Yield Limit Degradation, Int. J. Numer. Meth. Engng, 26(8): 1805-1823.
4. Becker, R. and Needleman, A. (1986). Effect of Yield Surface Curvature on Necking and Failure in Porous Plastic Solids, J. Appl. Mech., 53(3): 491-499.
5. Benzerga, A., Besson, J., Batisse, R. and Pineau, A. (2002). Synergistic Effects of Plastic Anisotropy and Void Coalescence on Fracture Mode in Plane Strain, Modelling Simul. Mater. Sci. Eng., 10(1): 73-102.
6. Brown, L.M. and Embury, J.D. (1973). The Initiation and Growth of Voids at Second Phase Particles, In: The Third International Conference on the Strength of Metals and Alloys, Vol. 1 Monograph and Report Series, 36: 164 - 169, Institute of Metals, London, United Kingdom.
7. Budiansky, B. (1970). Thermal and Thermoelastic Properties of Isotropic Composites, J. Composite Materials, 4: 286-295.
8. Davison, L. Stevens, A. and Kipp, M. (1977). Theory of Spall Damage Accumulation in Ductile Metals, J. Mech. Phys. Solids, 25(1): 11-28.
9. de Borst, R. and Mühlhaus, H. (1992). Gradient-dependent Plasticity: Formulation and Algorithmic Aspects, Int. J. Numer. Meth. Engng, 35(3): 521-539.
10. de Borst, R., Benallal, A. and Heeres, O. (1996). A Gradient Enhanced Damage Approach to Fracture, J. Phys., IV C6: 491-502.
11. Gurson, A. (1975). Plastic Flow and Fracture behavior of Ductile Materials Incorporating Void Nucleation, Growth, and Interaction, PhD Thesis, Brown University, Applied Mechanics.
12. Gurson, A. (1977). Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part 1- Yield Criteria and Flow Rules for Porous Ductile Media, J. Engng. Materials Technol., 99(1): 2-15.
13. Hakansson, P., Wallin, M. and Ristinmaa, M. (2006). Thermomechanical Response of Non-local Porous Material, Int. J. Plast., 22: 2066-2090.
14. Hancock, J. and Mackenzie, A. (1976). On The Mechanisms of Ductile Failure in High-strength Steels Subjected to Multi-axial Stress-states, J. Mech. Phys. Solids, 24(2): 147-169.
15. Kachanov, L. (1958). Rupture Time Under Creep Conditions, Izvestija Akademii Nauk SSSR, Otdeleine Tekhnicheskich Nauk. (In Russian) (English Translation: Rupture Time Under Creep Conditions Int. J. Frac. (97), pp. xi - xviii), 8(1): 26-31.
16. Kojic, M., Vlastelica, I. and Zikovic, M. (2002). Implicit Stress Integration Procedure for Small and Large Strains of the Gurson Model, Int. J. Numer. Meth. Engng, 53(12): 2701-2720.
17. Kroner, E. (1960). Allgemeine Kontinuumstheorie der Versetzungen und Eigenspannungen, Arch. Rational Mech. Anal, 4(4): 273-334.
18. Lassance, D., Scheyvaerts, F. and Pardoen, T. (2006). Growth and Coalescence of Penny-shaped Voids in Metallic Alloys, Engng. Fract. Mech., 73(8): 1009-1034.
19. Lee, E.H. (1969). Elastic-plastic Deformation at Finite Strains, J. Appl. Mech., 36(1): 1-6.
20. Lemaitre, J. and Chaboche, J.-L. (1990). Mechanics of Solid Materials, Cambridge University Press, Cambridge, United Kingdom, English edition.
21. Mahnken, R. (1999). Aspects of the Finite-element Implementation of the Gurson Model Including Parameter Identification, Int. J. Plasticity, 15(11): 1111-1137.
22. Mahnken, R. (2002). Theoretical, Numerical and Identification Aspects of a New Model Class for Ductile Damage, Int. J. Plasticity, 18(7): 801-831.
23. Menzel, A., Ekh, M., Runesson, K. and Steinmann, P. (2005). A framework for Multiplicative Elastoplasticity With Kinematic Hardening Coupled to Anisotropic Damage, Int. J. Plasticity, 21(3): 397-434.
24. Miehe, C. (1998). Comparison of two Algorithms for the Computation of Fourth Order Isotropic Tensor Functions, Comp. Struct., 66(1): 37-43.
25. Muhlich, U. and Brocks, W. (2003). On the Numerical Integration of a Class of Pressures-dependent Plasticity Models Including Kinematic Hardening, Comp. Mech., 31(6): 479-488.
26. Needleman, A. and Rice, J. (1978). Limits to Ductility Set by Plastic Flow Localization, In: Kostinen, D.P. et al. (eds), Mechanics of Sheet Metal Forming, pp. 237 - 267, Plenum Publishing Corporation.
27. Olsson, M. (2003). Plasticity Driven Damage and Void Growth, PhD Thesis, Dep. Mech. Engng., Solid Mechanics, Lund University, Sweden.
28. Olsson, M. and Ristinmaa, M. (2003). Damage Evolution in Elasto-plastic Materials - Material Response due to Different Concepts, Int. J. Damage Mechanics, 12(2): 115-139.
29. Ottosen, N. and Ristinmaa, M. (2005). The Mechanics of Constitutive Modeling, Elsevier, First edition.
30. Rabier, P. (1989). Some Remarks on Damage Theory, Int. J. Engng. Sci., 27(1): 29-54.
31. Rousselier, G. (1987). Ductile Fracture Models and their Potential in Local Approach of Fracture, Nucl. Engng and Des., 105(1): 97-111.
32. Simo, J.C. and Miehe, C. (1992). Associative Coupled Thermoplasticity at Finite Strains: Formulation, Numerical Analysis and Implementation, Comput. Methods Appl. Mech. Engng, 98(1): 41-104.
33. Simo, J.C. and Taylor, R.L. (1991). Quasi-incompressible Finite Elasticity in Principle Stretches. Continuum Basis and Numerical Algorithms, Comput. Methods Appl. Mech. Engng, 85(3): 273-310.
34. Springmann, M. and Kuna, M. (2005). Identification of Material Parameters of the Experimental and Numerical Techniques, Computational Materials Science, 32(3): 544-552.
35. Stromberg, L. and Ristinmaa, M. (1996). FE-formulation of a Nonlocal Plasticity Theory, Comput. Methods Appl. Mech. Eng., 136(1): 127-144.
36. Svedberg, T. and Runesson, K. (1997). A Thermodynamically Consistent Theory of Gradeintsregularised Plastcity Coupled to Damage, Int. J. Plasticity, 13(6): 669-696.
37. Truesdell, C. and Toupin, R.A. (1960). The Classical Field Theories, In: Flugge, S. (ed.), Handbuch der Physik, Vol. III/1, pp. 226-793, Springer-Verlag, Berlin, Germany.
38. Tvergaard, V. (1981). Influence of Voids on Shear Band Instabilities Under Plane Strain Conditions, Int. J. Fracture, 17(4): 389-407.
39. Tvergaard, V. and Needleman, A. (1984). Analysis of the Cup-cone Fracture in a Round Tensile Bar, Acta Metall, 32(1): 157-169.
40. Wang, D.A., Pan, J. and Liu S.D. (2004). An Anisotropic Gurson Yield Criterion for Porous Ductile Sheet Metals with Planar Ansiotropy, Int. J. Damage Mechanics, 13(1): 7-33.
41. Wallin, M. and Ristinmaa, M. (2001). Accurate Stress Updating Algorithm Based on Constant Strain Rate Assumption, Comput. Methods Appl. Mech. Eng., 190(42): 5583-5601.
42. Weber, G. and Anand, L. (1990). Finite Deformation Constitutive Equations and a Time Integration Procedure for Isotropic, Hyperelastic-viscoplastic Solids, Comput. Methods Appl. Mech. Eng., 79(2): 173-202.
43. Wriggers, P., Miehe, C., Klieber, M. and Simo, J. (1992). On the Coupled Thermomechanical Treatment of Necking Problems via Finite Element Methods, Int. J. Numer. Meth. Eng., 33(7): 869-883.