Interfacial adhesion of pine wood filled PP compounds via effects of volatile extractives

Composite Interfaces

Volumn 15, Issue 2-3, 2008, Pages 231-249

  Kim, Kwang Jea ^a,b   Bumm, Sughun ^b   White, James L ^b  

^a West Virginia University   (United States)

^b University of Akron   (United States)

Author keywords

Interfacial adhesion; Nucleation; Pine wood; Polypropylene; Volatile extractive

Indexed keywords

ADHESION; NUCLEATION; POLYPROPYLENES;

INTERFACIAL ADHESION; VOLATILE EXTRACTIVES;

WOOD PRODUCTS;

ADHESION; NUCLEATION; PINUS; POLYPROPYLENE; WOOD PRODUCTS;

EID: 40549139804     PISSN: 09276440     EISSN: 15685543     Source Type: Journal    
DOI: 10.1163/156855408783810830     Document Type: Article

References (50)

1. D. G. Gray, Polypropylene transcrystallization at the surface of cellulose fibers, J. Polym. Sci., Polym. Lett. Ed. 12, 509-515 (1974).
2. D. T. Quillin, D. F. Caulfield and J. A. Koutsky, Crystallinity in the polypropylene/cellulose system. I. Nucleation and crystalline morphology, J. Appl. Polym. Sci. 50, 1187-1194 (1993).
3. G. Wang and I. R. Harrison, Study of the preferential crystallization of polypropylene on the surface of woodfibers, SPE Tech Paper 40, 1474 (1994).
4. J. M. Felix and P. Gatenholm, Effect of transcrystalline morphology on interfacial adhesion in cellulose/polypropylene composites, J. Mater. Sci. 29, 3043-3049 (1994).
5. M. J. Folkes, Interfacial crystallization of polypropylene in composites, in: Polypropylene: Structure, Blends, and Composites, J. Karger-Kocsis (Ed.), pp. 341-370. Chapman and Hall, London (1995).
6. Y. X. C. Mi and Q. Guo, Bamboo fibre reinforced polypropylene composites: crystallisation and interfacial morphology, J. Appl. Polym. Sci. 64, 1267-1273 (1997).
7. S. Yin, T. R. Rials and M. P. Wolcott, Crystallization behavior of polypropylene and its effect on woodfiber composite properties, Fifth Internat. Conf. Woodfiber-Plast. Compos., pp. 139-146, Madison, WI, USA, May (1999).
8. J. W. Rowe and A. H. Conner, Extractives in eastern hardwoods - a review, Gen. Tech Report FPL18, Forest Products Laboratory, Forest service, U.S. Department of Agriculture, Madison, WI, USA (1979).
9. A. Ganz, T. Hutter and R. Kessler, Morphological characterization of differently refined fibres-the raw material for the production of hardboards in the wet process, Wood Fibre Polym. Compos. Symp., Cité mondiale-Bordeaux, France, March (2003).
10. M. Sain, S. Law, F. Suhara and A. Nouiloux, Interface modification and stiffness correlation of natural fibre-polyolefin composite products, Wood Fibre Polym. Compos. Symp., Cité mondiale-Bordeaux, France, March (2003).
11. S. H. Renneckar, Modification of Wood Fiber with Thermoplastics by Reactive Steam-Explosion Processing, PhD dissertation, Virginia Polytechnic Institute and State University, USA (2004).
12. J. D. Wellons, Cell wall polysaccharides in southern pine wood, Wood Sci. 2, 247-254 (1970).
13. S. A. Rydholm, Pulping Process, p. 1269. Interscience Publishers, NY, USA (1965).
14. L. E. Wise and E. C. Jahn (Eds), Wood Chemistry, Vol. 1, 2nd edn, p. 688. Reinhold Publishing, NY, USA (1952).
15. D. N. S. Hon and W. Y. Chao, Composites from benzylated wood and polystyrenes: their processability and viscoelastic properties, J. Appl. Polym. Sci. 50, 7-11 (1993).
16. D. Maldas and B. V. Kokta, Influence of phthalic anhydride as a coupling agent on the mechanical behavior of wood fiber-polystyrene composites, J. Appl. Polym. Sci. 41, 185-194 (1990).
17. K. J. Kim, S. Bumm, R. K. Gupta and J. L. White, Interfacial adhesion of cellulose fiber and natural fiber filled, polypropylene compounds and their effects on rheological and mechanical properties, (in press).
18. K. J. Kim, S. Bumm and J. L. White, Volatile extractives effects of pine wood on PP/pine wood compounds on rheological properties, J. Biobased Mater. Bioenergy 1, 388-400 (2007).
19. H. Kim, K. J. Kim, S. Kwon, P. P. Kundu, B. C. Jo, B. H. Lee, D. S. Lee and S. Choe, Comonomer effect on the mechanical and morphological behavior on the calcite-filled PP, CoPP, and TerPP, J. Appl. Polym. Sci. 86, 2041-2053 (2002).
20. S. Kwon, K. J. Kim, H. Kim, P. Kundu, T. Kim, Y Lee, B. Lee and S. Choe, Tensile property and interfacial dewetting in the calcite filled HDPE, LDPE, and LLDPE composites, Polymer 43, 6901-6909 (2002).
21. S. Bazhenov, J. X. Li and E. Baer, Ductility of filled, polymers, J. Appl. Polym. Sci. 52, 243-254 (1994).
22. J. X. Li, M. Silvestern, A. Hiltner and E. Baer, The ductile-to-quasi- brittle transition of particulate-filled thermoplastic polyester, J. Appl. Polym. Sci. 52, 255-267 (1994).
23. J. X. Li, A. Hiltner and E. Baer, Fractography and failure mechanisms of particulate-filled thermoplastic polyester, J. Appl. Polym. Sci. 52, 269-283 (1994).
24. A. E. Woodward and D. R. Morrow, Plastic deformation of poly-4-methylpentene-1 crystals, J. Polym. Sci. A2 7, 1651 (1969).
25. A. E. Woodward, Atlas of Polymer Morphology. Hanser, Munich, Germany (1988).
26. P. Koch, Utilization of the Southern Pines, Agricultural Handbook No. 420, Chapter 6. U.S. Department of Agricultural Forest Service, Southern Forest Experiment Station, USA (1972).
27. L. E. Wise and E. C. Jahn (Eds), Wood Chemistry, Vol. 1, p. 591. Reinhold Publishing Corporation, NY, USA (1952).
28. M. A. Buchannan, R. V. Sinnett and J. A. Jappe, The fatty acids of some American pulp woods, Tech. Assocn. Pulp Paper Ind. (TAPPI) 42, 578-583 (1959).
29. J. W. Swanson, R. W Kumler and R. E. Mispley, The Process of Sizing, in: International Sizing of Paper and Paper Board, J. W. Swanson (Ed.), pp. 54-96. TAPPI Monograph series No. 33, New York, USA (1971).
30. R. E. Swanson, Mechanism, of cellulose sizing produced by vapor phase deposition, TAPPI 61, 77 (1978).
31. P. G. Andersen and S. H. Carr, Formation of bimodal crystal textures on polypropylene, J. Mater. Sci. 10, 870-888 (1975).
32. G. H. Atherton and J. R. Welty, Drying rates of Douglas-fir veneer in superheated steam at temperatures to 800°F, Wood Sci. 4, 209-218 (1972).
33. P. L. Northcott, W. V. Hancock and H. G. M. Colbeck, Water relations in phenolic (plywood.) bonds, Forest Prod. J. 12, 478-486 (1962).
34. V. R. Gary, The wettability of wood, Forest Prod. J. 12, 452-461 (1962).
35. W. V. Hancock, The influence of native fatty acids on the formation of glue bonds with heat-treated wood, PhD thesis, University of British Columbia, Vancouver, Canada (1964).
36. G. E. Troughton and S.-Z. Chow, Migration of fatty acids to white spruce veneer surface during, drying: relevance to theories of inactivation, Wood Sci. 3, 129-133 (1971).
37. R. W. Hemingway, Thermal instability of fats relative to surface wettability of yellow birchwood (Betula lutea), TAPPI 52, 2149-2155 (1969).
38. G. D. Sinclair, R. S. Evans and H. R. Sallans, New methods for sizing fibrous products, Pulp Pap. Mag. Can. 62, T23-T27 (1960).
39. P. N. Yiannos, Molecular orientation of some fatty acids when in contact with water, PhD thesis, Lawrence College, Appleton, WI, USA (1960).
40. R. W Davison, The sizing of paper, TAPPI 58, 48 (1975).
41. F. Houllier, N. Boquillon, P. Dole, B. Monties and L. Averous, Novel biodegradable composites based on lignocellulosic fibres, in: Wood Fibre Polym. Compos. Symp., Cité mondiale-Bordeaux, France, March (2003).
42. A. W. Christiansen, How over-drying wood, reduces its bonding to phenol-formaldehyde adhesives: a critical review of the literature. Part I. Physical responses, Wood Fiber Sci. 22, 441-459 (1990).
43. S.S. Kelly, T. G. Rials and W. G. Classer, Relaxation behavior of the amorphous components of wood, J. Mater. Sci. 22, 617-624 (1987).
44. W. T. Nearn, Application of the ultrastructure concept in industrial wood products research, Wood Sci. 6, 285-293 (1974).
45. H. Hatakeyama, T. Hatakeyama and J. Nakano, The effect of hydrogen bond formation on the structure of amorphous cellulose, Appl. Polym. Symp. 28, 743-750 (1976).
46. J. E. Stone and A. M. Scallan, A study of cell wall structure by nitrogen adsorption, Pulp Pap. Mag. Can. 60, T407-T414 (1965).
47. J. E. Stone and A. M. Scallan, Influence of drying on the pore structures of the cell wall, in: Consolidation of the Paper Web, F. Bolan (Ed.), pp. 145-166. Technical Section of the British Paper and Board Makers Association, Cambridge, UK, September 1965, published London (1966).
48. S. Ahn and J. L. White, Influence of carboxylic acid additive on the flow behavior of molten thermoplastics, J. Appl. Polym. Sci. 90, 1555-1564 (2003).
49. S. Ahn and J. L. White, Wall effects on flow of polymer/particulate/ (carboxylic acid) in dies and rheometers, J. Appl. Polym. Sci. 91, 651-658 (2003).
50. S. Ahn and J. L. White, Die wall effects, contact angles and slippage in flow of polymer melts and polymer particle compounds with carboxylic acids in slit dies, Int. Polym. Proc. 19, 21-26 (2004).