Mechanics of curved composites and some related problems for structral members

Mechanics of Advanced Materials and Structures

Volumn 11, Issue 6 II, 2004, Pages 445-515

  Akbarov, Surkay D ^a,b   Guz, Alexandr N ^c  

^a YILDIZ TECHNICAL UNIVERSITY   (Turkey)

^b INSTITUTE OF PHYSICS   (Azerbaijan)

^c S P TIMOSHENKO INSTITUTE OF MECHANICS   (Ukraine)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING (DEFORMATION); MATHEMATICAL MODELS; PARAMETER ESTIMATION; PROBLEM SOLVING; REINFORCEMENT; STRESS ANALYSIS; STRUCTURAL MEMBERS;

CURVED COMPOSITES; INFORCING FIBERS; LAMINAR COMPOSITE MATERIALS;

COMPOSITE MATERIALS;

EID: 4043111267     PISSN: 15376494     EISSN: None     Source Type: Journal    
DOI: 10.1080/15376490490451624     Document Type: Review

References (128)

1. T. W. Chou, R. L. Mc Cullough, and R. B. Pipes, Composites, Sci. Am., no. 10, vol. 255, pp. 193-203, 1986.
2. Z.-N. Feng, H. G. Allen, and S. S. Moy, Micromechanical Analysis of a Woven Composite, Proc. ECCM-8, WoodHead Publishing Limited, Naples, Italy, vol. 4, pp. 619-625, 1998.
3. V. K. Ganesh and N. K. Naik, Failure Behaviour of Plane Weave Fabric Laminates Under On-Axis Uniaxial Tensile Loading, III - Effect of Fabric Geometry, J. Compo. Mater., vol. 30, pp. 1823-1856, 1996.
4. Yu. M. Tarnopolsky, I. G. Jigun, and V. A. Polyakov, Spatially-Reinforced Composite Materials: Handbook, Mashinostroyenia, Moscow, 1987 (Russian).
5. S.D. Akbarov and A. N. Guz, Mechanics of Curved Composites, Kluwer Academic, Dortrecht/Boston/London, 2000.
6. H. T. Corten, Fracture of Reinforcing Plastics, in L. J. Broutman and R. H. Krock (eds.), Modern Composite Materials, pp. 27-100, Addison-Wesley, Reading, MA, 1967.
7. A. N. Guz, V. T. Tomashevski, N. A. Shulga, and V. S. Yakovlev, Technological Stresses and Strains in Composite Materials, Vitsaya skola, Kiev, 1988 (Russian).
8. L. P. Khoroshun and E. N. Shikula, Short-Time Micro Damage of Layered Materials Under the Temperature Action, Int. Appl. Mech., vol. 38, pp. 60-69, 2002.
9. S. D. Akbarov, A. N. Guz, E. A. Movsumov, and S. M. Mustafaev, in A. N. Guz and S. D. Akbarov (eds.), Mechanics of Materials with Distorted Structures, Nauk. Dumka, Kiev, 1995 (Russian).
10. A. N. Guz, N. A. Shulga, V. T. Tomashevsky, A. S. Zachvatov, V. G. Karnauchov, M. P. Nosov, A. P. Primak, A. O. Rasskazov, I. K. Senchenkov, Yu. M. Federenko, and V. S. Yakovlev, In N. A. Shulga and V. T. Tomashevsky (eds.), Technological Stresses and Strains in Materials, Kiev, PTOO, 1997 (Russian).
11. S. D. Akbarov and A. N. Guz, Statics of Laminated and Fibrous Composites with Curved Structures. Appl. Mech. Rev., The American Society of Mechanical Engineers, vol. 45, pp. 17-34, 1992.
12. V. V. Bolotin, The Theory of Reinforced Layered Material with Random Distortions, Mech. Polim., vol. 2, no. 1, pp. 11-19, 1966 (Russian).
13. V. V. Bolotin and Yu. N. Novichkov, Mechanics of Multilayered Structures, Mashinostroyeniye, Moscow, 1980 (Russian).
14. B. P. Makarov and V. P. Nikolayev, The Influence of the Curving of the Reinforcing Elements to the Mechanical and Heat-Physical Properties of Composite Materials, Mech. Polim., vol. 7, no. 6, pp. 1036-1039, 1971 (Russian).
15. Yu. M. Tarnopolsky and A. V. Rose, Special Feature of Design of Parts Fabricated from Reinforced Plastics, Zinatne, Riga, 1969 (Russian).
16. V. V. Bolotin, Layered Elastic and Viscoelastic Materials with Initial Random Distortions, Eng. J. Mech. Tverd Tela, vol. 3, no. 3, pp. 59-65, 1966 (Russian).
17. Z. P. Bazhant, The Influence of the Curvature of Reinforced Fibres on the Elasticity Modulus and Strength of Composite Materials, Mech. Polim., vol. 4, no. 2, pp. 314-321, 1968 (Russian).
18. A. V. Nosarev, The Influence of the Fibers Curving to the Elastic Properties of the Unidirectional Reinforced Plastics, Mech. Polim., vol. 3, no. 5, pp. 858-863, 1967 (Russian).
19. J. M. Whitney, Geometrical Effects of Filament Twist on the Modulus and Strength of Graphite Fiber, Textile Res. J., vol. 36, pp. 765-770, 1966.
20. A. L. Kalmkarov, B. A. Kudryavcev, and V. Z. Parton, The Problem on the Curved Layer from the Composite Materials with Periodical Waviness Surfaces in the Structure, Prikl Mat. Mekh., vol. 51, pp. 68-75, 1987 (Russian).
21. E. H. Mansfied and D. Purslow, The Influence of Fibre Waviness on the Moduli of Unidirectional Fibre Reinforced Composites, Aeronoutical Research Council Current Paper, no. 1339, 1974.
22. D. G. Swift, Elastic Moduli of Fibrous Composites Containing Misalined Fibres, J. Phys. D Appl. Phys., vol. 8, pp. 223-240, 1975.
23. Ph. Vandeurzen, J. Ivens, and I. Verpoest, A Three-Dimensional Micromechanical Analysis of Woven Fabric Composites: I. Geometric Analysis, Compos. Sci. Technol., vol. 56, pp. 1303-1315, 1996.
24. T. J. Whitney and T.-W. Chou, Modelling of 3-D Angle-Interlock Textile Structural Composites, J. Compos. Mater., vol. 23, pp. 890-911, 1989.
25. J. M. Yang, C. L. Ma, and T.-W. Chou, Fiber Inclination Model of Three-Dimensional Textile Structural Composites, J. Compos. Mater., vol. 20, pp. 472-484, 1986.
26. A. N. Guz, On the Continual Theory of Composite Materials with Small Scale Curvings in the Structure, Dokl. Akad. Nauk SSSR, vol. 268, pp. 307-313, 1983 (Russian).
27. A. N. Guz, Mechanics of Composite Materials with a Small-Scale Structural Flexure, Sov. Appl. Mech., vol. 19, pp. 383-393, 1983.
28. R. M. Christensen, Mechanics of Composite Materials, Willey, New York, 1979.
29. M. M. Schwartz (ed.), Composite Materials Handbook, 2nd ed., McGraw-Hill, New York, 1992.
30. S. G. Lekhnitskii, Theory of Elasticity of an Anisotropic Body, Holden Day, San Francisco, CA, 1963.
31. A. N. Guz, Quasi-Uniform States in Composites with a Small-Scale Curvatures in the Structure, Sov. Appl. Mech., vol. 19, pp. 479-490, 1983.
32. A. N. Guz, On the Vibration Theory of the Composite Materials with Small-Scale Curved Structures, Dokl. Akad. Nauk. SSSR, vol. 270, pp. 1078-1081, 1983 (Russian).
33. S. D. Akbarov and A. N. Guz, Continuum Theory in the Mechanics of Composite Materials with Small-Scale Structural Distortion, Sov. Appl. Mech., vol. 27, pp. 107-117, 1991.
34. S. D. Akbarov and G. M. Guliev, Quasihomogeneous States in the Structure, Dep. in VINITI, no. 511-B91-90p, 1991. (Russian).
35. S. D. Akbarov and M. H. Asadov, Quasihomogeneous State in Multilayered Composites with Arbitrary Plane-Curving Structures, Izvestiya Azerbaijan State Pedagogical University im. N. Tusi, vol. 1 no. 2, pp. 94-103, 1995 (Russian).
36. M. H. Asadov, On the Quasihomogeneous State in Multilayered Composites with Spatially Curving Structures in Pure Shear, Izvestiya Azerbaijan State Pedagogical University im, N. Tusi, vol. 1 no. 2, pp. 89-93, 1995 (Russian).
37. N. Yahnioglu, FEM Analyses of the Boundary-Value Problems Corresponding to the Statics of Elements of Constructions Fabricated from Composite Materials with Curved Structure, Ph. D. thesis, The Yildiz Technical University, Istanbul, 1996.
38. S. D. Akbarov and N. Yahnioglu, Stress Distribution in a Strip Fabricated from a Composite Material with Small-Scale Curved Structure, Int. Appl. Mech., vol. 33, pp. 684-690, 1997.
39. N. Yahnioglu, Three-Dimensional Analysis of Stress Fields in the Plate Fabricated from Composite Materials with Small-Scale Structural Curving, Mech. Compos. Mater., vol. 33, pp. 340-348, 1997.
40. S. D. Akbarov and N. Yahnioglu, On the Finite Element Analysis of the Influence of the Local Structural Damage of the Multilayered Thick Plate Material to the Stress Distribution, in C. A. Brebbia and A. Carpinteri (eds.), Damage and Fracture Mechanics, pp. 187-196, Computational Mech. Pub., Sauthampton, UK, Boston, 1998.
41. S. D. Akbarov and N. Yahnioglu, The Influence of the Local Structural Damage of the Multi-layered Thick Plate Material to the Stress Distribution, Int. Appl. Mech., vol. 35, pp. 873-878, 1999.
42. E. Tekin Tarim and S. D. Akbarov, Three-Dimensional Stress Analyses in the Thick Plate Fabricated from the Composite Material with Spatially Local Curved Structure, Mech. Compos Mater. vol. 39, no. 5, pp. 447-454, 2003.
43. Y. Kahramaner, I. Taylan, I. Gene Demiriz, and S. Selim, Investigation of the Stress Distribution in a Thick Plate Fabricated from the Curved Composite, in D. Hui (ed.), ICCE/8, pp. 413-414, August 5-11, 2001.
44. N. Yahnioglu and S. Selim, Bending of a Composite Material Strip with Curved Structure in the Geometrically Nonlinear Statement, Mech. Compos. Mater., vol. 36, pp. 459-464, 2000.
45. S. D. Akbarov, A. N. Guz, and A. D. Zamanov, Natural Vibrations of Composite Materials Having Structures with Small-Scale Curvatures, Int. Appl. Mech., vol. 29, pp. 794-800, 1993.
46. Z. Kutug, Natural Vibration of the Beam-Strip Fabricated from a Composite Material with Small-Scale Curvings in the Structure, Mech. Compos. Mater., vol. 32, pp. 502-512, 1996.
47. Z. Kutug, Natural Vibration and Buckling of the Composite Beam-Plates Fabricated from Composite Material with Locally and Periodically Curved Structure, Ph. D. thesis, The Yildiz Technical University, Istanbul, 1997.
48. A. Kromm, Verallgemeinerte Theori der Plattenstatik, Ing. Arch., vol. 21, pp. 266-286, 1953.
49. A. Kromm, Uber die Randquerkräfte Biegestützter Platten, Z. Angew. Math. Mech., vol. 35, pp. 231-242, 1955.
50. E. Reissner, The Effect of Transverse Shear Deformation on the Bending of Elastic Plates, J. Appl. Mech., vol. 12, pp. 67-77, 1945.
51. A. D. Zamanov, On the Stress Distribution in the Thick Plate Fabricated from the Composite Material with Curved Structures Under Forced Vibration, Mech. Compos. Mater., vol. 35, pp. 447-454, 1999.
52. A. D. Zamanov, Natural Vibration of a Rectangular Plate of Composite Material with Periodically Bent Structures, Int. Appl. Mech., vol. 36, pp. 1035-1039, 2000.
53. A. D. Zamanov, Stress Distribution in a Rigidly Clamped Composite Plate with Locally Curved Structures Under Forced Vibration, Int. Appl. Mech., vol. 37, pp. 1189-1195, 2001.
54. A. D. Zamanov, The Effect of Structural Curvings on the Stress Distribution in a Rigidly Fixed Composite Plate Under Forced Vibration, Mech. Compos. Mater., vol. 38, pp. 41-46, 2002.
55. S.D. Akbarov and I. G. Demiriz, Natural Vibration of the Thick Plate Fabricated from the Spatially Curved Composite, in D. Hui (ed.), ICCE/8, Tenerife, Canary Islands, Spain, Int. Community for Composites Engineering and College of Engineering, University of New Orleans, August 5-11, pp. 11-12, 2001.
56. I. G. Demiriz and S. D. Akbarov, Stress Analysis in the Rectangular Thick Plate from Composite Material with Periodic Spatially Curved Structure Under Forced Vibration, Mech. Compos. Mater., vol. 39, pp. 235-244, 2003.
57. S. D. Akbarov and S. Selim, Stability of a Strip Made of a Multilayered Composite with a Curved Structure, Int. Appl. Mech., vol. 37, pp. 831-839, 2001.
58. A. N. Guz, Fundamentals of the Three-Dimensional Theory of Stability of Deformable Bodies, Springer-Verlag, Berlin, 1999.
59. A. N. Guz, Constructing the Three-Dimensional Theory of Stability of Deformable Bodies, Int. Appl. Mech., vol. 37, pp. 1-37, 2001.
60. S. D. Akbarov and A. N. Guz, Method of Solving Problems in Mechanics of Composite Materials with Bent Layers, Sov. Appl. Mech., vol. 20, pp. 299-304, 1984.
61. S. D. Akbarov and A. N. Guz, Model of a Piecewise-Homogeneous Body in the Mechanics of Laminar Composites with Fine-Scale Curvatures, Sov. Appl. Mech., vol. 21, pp. 313-319, 1985.
62. S. D. Akbarov and A. N. Guz, On the Mechanics of Composite Materials with Curved Structures, Dokl. Akad. Nauk. SSSR, vol. 281, pp. 37-41, 1995 (Russian).
63. A. N. Guz, On the Approximate Method of Stress Concentration Determination near Curvilinear Holes in Shells, Prikl. Mekh., vol. 8, pp. 605-612, 1962 (Russian).
64. Yu. N. Nemish, Development of Analytical Methods in Three-Dimensional Problems of the Statics of Anisotropic Bodies (Review), Int. Appl. Mech., vol. 36, pp. 135-173, 2000.
65. S. D. Akbarov and A. N. Guz, On the Stressed State in Composite Material with Curved Layers and Low Filler Concentration, Mech. Compos. Mater., vol. 20, pp. 990-996, 1984.
66. S. D. Akbarov, On the Distribution of Self-Equilibrated Stresses in Multilayered Composite Material with Curved Structures, Mathematical Methods and Physical-Mechanical Fields, Naukova Dumka, Kiev, ser. 26, pp. 83-89, 1987 (Russian).
67. S. D. Akbarov, On the Distribution of Normal Stresses in Multilayered Composite Material with Curved Structures, Izv. Akad. Nauk. Azerb. SSR, vol. 3, pp. 158-163, 1986 (Russian).
68. S. D. Akbarov, Stresses Distribution in a Multilayered Composite with Small-Scale Antiphase Curvatures in the Structure, Sov. Appl. Mech., vol. 23, pp. 107-112, 1987.
69. S. D. Akbarov and A. N. Guz, Distribution of Stresses in Multilayered Composite Material with Curved Structures (The Model of the piecewise- homogeneous Body), Mech. Compos. Mater., vol. 23, pp. 592-599, 1987.
70. S. D. Akbarov, The Distribution of Stresses in Multilayered Composite Material with Curved Structurs in Shear (The Model of the Piecewise-Homogeneous Body), Preprint, Izv. Akad. Nauk. Azerb. SSR, Institute of Physics, Baku, no. 162, 1986.
71. S. D. Akbarov and S. A. Aliyev, The Stressed State in Laminated Composite Materials with Partial Curvings in the Structure, Preprint, Izv. Akad. Nauk. Azerb. SSR, Institute of Physics, Baku, no. 252, 1987 (Russian).
72. S. D. Akbarov and S. A. Aliev, Stress State in Laminar Composite Material with Partial Distortion in Structure, Sov. Appl. Mech., vol. 27, pp. 1127-1132, 1991.
73. S. D. Akbarov, A Method of Solving Problems in the Mechanics of Composite Materials with Curved Viscoelastic Layers, Sov. Appl. Mech., vol. 21, pp. 221-226, 1985.
74. R. A. Schapery, Approximate Methods of Transform Inversion for Viscoelastic Stress Analysis, Proc. US Natl. Cong.: Appl. ASME, vol. 33, no. 4, pp. 1075-1085, 1966.
75. S. D. Akbarov, The Influence of Rheological Parameters of Matrix Material on the Distribution of Self-Equilibrated Stresses in Multilayered Composite with Curved Structures, Mech. Compos. Mater., vol. 22, pp. 610-617, 1986.
76. Yu. N. Rabotnov, Elements of Hereditary Mechanics of Solid Bodies, Nauka, Moscow, 1977 (Russian).
77. S. D. Akbarov, A. N. Guz, and S. M. Mustafaev, Mechanics of Composite Materials with Anisotropic Distorted Layers, Sov. Appl. Mech., vol. 23, pp. 528-534, 1987.
78. S. D. Akbarov and S. M. Mustafaev, Distribution of Stresses in the Laminated Composite Material with Anisotropic Curved Layers, Preprint, Izv. Akad. Nauk. Azerb. SSR, Institute of Physics, Baku, no. 1, 1987 (Russian).
79. S. D. Akbarov, Solution of Problems of the Stress-Strain State of Composite Materials with Curvilinearly Anisotropic Layers, Sov. Appl. Mech., vol. 25, pp. 12-21, 1989.
80. S. D. Akbarov and S. M. Mustafaev, Distribution of Self-Balanced Stresses in Composite Materials with Curved Anisotropic Layers, Sov. Appl. Mech., vol. 28, pp. 1225-1228, 1992.
81. S. D. Akbarov, M. D. Verdiev, and A. N. Guz, Stress and Deformation in a Layered Composite Material with Distorted Layers, Sov. Appl. Mech., vol. 25, pp. 1146-1153, 1989.
82. I. Yu. Babich, A. N. Guz, and V. N. Checkhov, The Three-Dimensional Theory of Stability of Fibrous and Laminated Materials, Int. Appl. Mech., vol. 37, pp. 1103-1141, 2001.
83. S. D. Akbarov, On the Mechanics of Composite Materials with Local Curvings in the Structure, Prikl. Mekh., vol. 23, pp. 119-122, 1987 (Russian).
84. S. D. Akbarov, Stress State in a Laminated Composite with Local Curvatures in the Structure, Sov. Appl. Mech., vol. 24, pp. 452-461, 1988.
85. S. D. Akbarov, Distributions of Self-Balanced Stresses in a Laminated Composite Material with Antiphase Locally Distorted Structures, Sov. Appl. Mech., vol. 24, pp. 560-565, 1988.
86. A. N. Guz and S. D. Akbarov, Problems of Mechanics of Composite Materials with Curved Structures (Model of the Piecewise-Homogeneous Medium), Mech. Compos. Mater., vol. 25, pp. 788-798, 1989.
87. S. D. Akbarov, Effect of the Modes of Small-Scale Antiphase Local Curvature in the Structure of Laminated Composites on the Distribution of Self-Balanced Stresses, Sov. Appl. Mech., vol. 25, pp. 658-663, 1989.
88. M. W. Hyer, L. C. Maac, and H. P. Func, The Influence of Layer Waviness on the Stress State in Hydrostatically Loaded Cylinders, J. Reinf. Plast. Compos., vol. 7, pp. 601-613, 1988.
89. A. E. Green and J. E. Adkins, Large Elastic Deformations and Non Linear Continuum Mech., Clarendon Press Oxford, 1960.
90. A. N. Guz, Constructing the Nonlinear Small-Deformation Theory in the Mechanics of Deformable Bodies, Int. Appl. Mech., vol. 37, pp. 1023-1027, 2001.
91. C. B. Biezeno and H. Hencky, On the General Theory of Elastic Stability, K. Ned. Akad. Van. Wet., vol. 32, pp. 446-456, 1930.
92. M. A. Biot, Mechanics of Incremental Deformations, Wiley, New York, 1965.
93. S. D. Akbarov, T. Sisman, and N. Yahnioglu, On the Fracture of the Unidirectional Composites in Compression, Int. J. Eng. Sci., vol. 35, pp. 1115-1135, 1997.
94. S. D. Akbarov and Z. R. Djamalov, Influence of Geometrie Non-Linearity Calculation on Stress Distribution in Laminar Composites with Curved Structures, Mech. Compos. Mater., vol. 28, pp. 799-812, 1992.
95. S. D. Akbarov, A. N. Guz, Z. R. Djamalov, and E. A. Movsumov, Solution of Problems Involving the Stress of Composite Materials with Curved Layers in the Geometrically Non-Linear Statement, Int. Appl. Mech., vol. 28, pp. 343-347, 1992.
96. S. D. Akbarov, On the Determination of Normalized Non-Linear Mechanical Properties of Composite Materials with Periodically Curved Layers, Int. J Solid Struct., vol. 32, pp. 3229-3243, 1995.
97. A. N. Guz, Elastic Waves in Bodies with Initial (Residual) Stresses, Int. Appl. Mech., vol. 38, pp. 23-59, 2002.
98. A. N. Guz, Mechanics of Fracture of Composite Materials in Compression, Naukova Dumka, Kiev, 1990 (Russian).
99. S. D. Akbarov, On the Three-Dimensional Stability Loss Problems of Elements of Structures of Viscoelastic Composite Materials, Mech. Compos. Mater., vol. 34, pp. 537-544, 1998.
100. S. D. Akbarov and N Yahnioglu, A Method of Investigation of the General Theory of Stability Problems on Structural Elements Fabricated from Viscoelastic Composite Materials, Compos. Part B: Eng., vol. 32, pp. 475-482, 2001.
101. S. D. Akbarov, N. Yahnioglu, and Z. Kutug, On the Three-Dimensional Stability Loss Problem of the Viscoelastic Composite Plate, Int. J. Eng. Sci., vol. 39, pp. 1443-1457, 2001.
102. N. Yahnioglu and S. D. Akbarov, Stability Loss Analyses of the Elastic and Viscoelastic Composite Rotating Thick Circular Plate in the Framework of the Three-Dimensional Linearized Theory of Stability, Int. J. Mech. Sci., vol. 44, pp. 1225-1244, 2002.
103. Z. Kutug, N. Yahnioglu, and S. D. Akbarov, The Loss of Stability Analyses of an Elastic and Viscoelastic Composite Circular Plate in the Framework of Three-Dimensional Linearized theory, Eur. J. Mech. A - Solid, vol. 22, pp. 475-488, 2003.
104. S. D. Akbarov and O. G. Rzayev, On the Buckling of the Elastic and Viscoelastic Composite Circular Thick Plate with a Penny-Shaped Crack, Eur. J. Mech. A - Solid, vol. 21, pp. 269-279, 2002.
105. S. D. Akbarov and O. G. Rzayev, Delamination of Unidirectional Composite Materials, Mech. Compos. Mater., vol. 38, pp. 17-24, 2002.
106. S. D. Akbarov and O. G. Rzayev, On the Delamination of a Viscoelastic Composite Circular Plate, Int. Appl. Mech., vol. 39, pp. 368-374, 2003.
107. O. G. Rzayev and S. D. Akbarov, Local Buckling of the Elastic and Viscoelastic Coating Around the Penny-Shaped Interface Crack, Int. J. Eng. Sci., vol. 40, pp. 1435-1451, 2003.
108. L. Librescu and N. K. Chandiramani, Recent Results Concerning the Stability of Viscoelastic Shear Deformable Plates Under Compressive Edge Loading, Solid Mech. Arch., vol. 14, pp. 215-250, 1989.
109. N. K. Chandiramani, L. Librescu, and J. Aboudi, The Theory of Orthotropic Viscoelastic Shear Deformable Composite Plates and Their Dynamic Stability, Int. J. Solid Struct., vol. 20, pp. 465-482, 1989.
110. N. K. Chandiramani and L. Librescu, Dynamic Stability of Unidirectional Fiber-Reinforced Composite Plates, Appl. Mech. Rev., vol. 42, pp. 39-47, 1989.
111. Yu. M. Tarnopolsky and T. Ya. Klinsis, Methods of Statical Experiments of Reinforcing Plastics, Zinatne, Riga, 1972 (Russian).
112. S. D. Akbarov and A. N. Guz, On One Effect in Mechanics of Composite Materials Fracture, Dokl. Akad. Nauk. SSSR, vol. 290, pp. 23-26, 1986 (Russian).
113. S. D. Akbarov, F. G. Maksudov, P. G. Panakhov, and A. I. Seyfullayev, On the Crack Problems in Composite Materials with Curved Layers, Int. J. Eng. Sci., vol. 32, pp. 1003-1016, 1994.
114. S.D. Akbarov, On Fracture Mechanics of Composite Materials. Dokl. Akad. Nauk. Azerb. SSR, vol. 45, pp. 18-21, 1989 (Russian).
115. S. D. Akbarov, On the Crack Problems in Composite Materials with Locally Curved Layers, Mech. Compos. Mater., vol. 30, pp. 750-759, 1994.
116. S.D. Akbarov, On the Row Cracks Problem in Composite Materials with Periodically Curved layers, Bull. Tech. Univ. Istanbul, vol. 47, pp. 577-593, 1994.
117. S. D. Akbarov, A. Cilli, and A. N. Guz, The Theoretical Strength Limit in Compression of Viscoelastic Layered Composite Materials, Compos. Part B - Eng., vol. 30, pp. 465-472, 1999.
118. S. D. Akbarov, M. S. Guliev, and E. A. Movsumov, Determination of Corrected Mechanical Properties for Composites with Periodically Curved Layers, Int. Appl. Mech., vol. 30, pp. 508-515, 1994.
119. S.D. Akbarov and A. N. Guz, Method of Solving Problems in the Mechanics of Fiber Composites with Curved Structures, Sov. Appl. Mech., vol. 21, pp. 777-785, 1985.
120. S. D. Akbarov and A. N. Guz, Stress State of a Fiber Composite with Curved Structures with a Low Fiber Concentration, Sov. Appl. Mech., vol. 21, pp. 560-565, 1985.
121. S. D. Akbarov and A. N. Guz, Normal Stresses in a Fiber Composite with Curved Structures Having a Low Concentration of Filler, Sov. Appl. Mech., vol. 22, pp. 1065-1069, 1986.
122. S. D. Akbarov, Stress State in a Viscoelastic Fibrous Composite with Curved Structures and a Low Fiber Concentration, Sov. Appl. Mech., vol. 22, pp. 506-513, 1986.
123. S. D. Akbarov, The Distribution of Self-Equilibrated Stresses in Fibrous Composite Materials with Twisted Fibers, Mech. Compos. Mater., vol. 26, pp. 803-812, 1990.
124. S. D. Akbarov and R. Kosker, Stress Distribution in the Infinite Elastic Body with Two Neighbouring Periodical Curved Fibers, in D. Hui (ed.), ICCE/8, Tenerife, Canary Islands, Spain, Int. Community for Composites Engineering and College of Engineering, University of New Orleans, pp. 489-490, August 5-11, 2001.
125. S. D. Akbarov and R. Kosker, On a Stress Analysis in the Infinite Elastic Body with Two Neighbouring Curved Fibers, Compos. Part B - Eng. vol. 34, pp. 143-150, 2003.
126. R. Kosker and S. D. Akbarov, The Influence of the Interaction Between Two Neighbouring Periodical Curved Fibers to the Stress Distribution in a Composite Material, Mech. Compos. Mater., vol. 39, pp. 165-176. 2003.
127. S. D. Akbarov and R. Kosker, Stress Distribution Caused by Anti-Phase Periodical Curving of Two Neighbouring Fibers in a Composite Materials, Eur. J. Mech. A - Solid, vol. 22, pp. 243-256, 2003.
128. S. D. Akbarov and A. N. Guz, Stability of Two Fibers in an Elastic Matrix with Small Strains, Sov. Appl. Mech., vol. 21, pp. 1-7, 1985.