Shear deformation plate and shell theories: From Stavsky to present

Mechanics of Advanced Materials and Structures

Volumn 11, Issue 6 II, 2004, Pages 535-582

  Reddy, J N ^a   Arciniega, R A ^a  

^a Texas AandM University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BUILDING MATERIALS; DESIGN AIDS; ELASTICITY; FINITE ELEMENT METHOD; INTERPOLATION; LAMINATED COMPOSITES; MATHEMATICAL MODELS; PLATES (STRUCTURAL COMPONENTS); SHELLS (STRUCTURES); STRENGTH OF MATERIALS; STRUCTURAL ANALYSIS;

COMPOSITE SHELLS; SHEAR EFFECTS; STRUCTURAL COMPONENTS; THREE-DIMENSIONAL ELASTICITY THEORY;

SHEAR DEFORMATION;

EID: 4043067118     PISSN: 15376494     EISSN: None     Source Type: Journal    
DOI: 10.1080/15376490490452777     Document Type: Review

References (105)

1. R. M. Jones, Mechanics of Composite Materials, 2nd ed. Taylor and Francis, Philadelphia, PA, 1998.
2. S. W. Tsai, Introduction to Composite Materials, Technomic, Lancaster, PA, 1980.
3. J. R. Vinson, The Behaviour of Shells Composed of Isotropic and Composite Materials, Kluwer Academic, Dordrecht, Netherlands, 1993.
4. J. N. Reddy, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd ed. CRC Press, Boca Raton, 2003.
5. J. N. Reddy, A Simple Higher-Order Theory for Laminated Composite Plates, J. Appl. Mech., vol. 51, pp. 745-752, 1984.
6. Y. Stavsky, On the theory of Symmetrically Heterogeneous Plates Having the Same Thickness Variation of the Elastic Moduli, in D. Abir, F. Ollendorff, and M. Reiner (eds.), Topics in Applied Mechanics, Elsevier, Newyork, 1965.
7. Y. Stavsky, On the Theory of Heterogeneous Anisotrophic Plates, Ph.D. thesis, MIT, Cambridge, MA, 1959.
8. P. Yang, C. H. Norris, and Y. Stavsky, Elastic Propagation in Heterogeneous Plates, Int. J. Solid Struct., vol. 2, pp. 665-684, 1966.
9. C. T. Sun and J. M. Whitney, Theories for the Dynamic Response of Laminate Plates, AIAA J., vol. 11, pp. 178-183, 1973.
10. J. M. Whitney and C. T. Sun, A Higher-Order Theory for Extensional Motion of Laminate Composites, J. Sound Vib., vol. 30, pp. 85-97, 1973.
11. S. Srinivas and A. K. Rao, Bending, Vibration and Buckling of Simply Supported Thick Orthotropic Rectangular Plates and Laminates, Int. J. Solid Struct, vol. 6, pp. 1463-1481, 1970.
12. S. Srinivas and C. V. Joga Rao, A. K. Rao, An Extract Analysis for Vibration of Simply Supported Homogeneous and Laminates Thick Rectangular Plates J. Sound Vib., vol. 12, pp. 187-199. 1970.
13. S. A. Hussainy and S. Srinivas, Flexure of Rectangular Composite Plates, Fib. Sci. Technol., vol. 8, pp. 59-76, 1975.
14. C. W. Bert, Analysis of Plates, in C. C. Chamis (ed.), Structural Design and Analysis - Part I, Academic Press, New York, 1974.
15. W. T. Koiter, A Consistent First Approximation in the General Theory of Thin Elastic Shells, Proceedings IUTAM of the Symposium on the Theory of Thin Elastic Shells, Delft, pp. 12-33, 1959.
16. J. L. Sanders, An Improved First-Approximation Theory for Thin Shells, NASA Report 24, 1959.
17. B. Budiansky and J. L. Sanders, On the "Best" First-Order Linear Shell Theory, Progress in Applied Mechanics, Prager Anniversary Volume, vol. 192, pp. 129-140. Macmillan, New York, 1963.
18. P. M. Nagdhi, Foundations of Elastic Shell Theory, Progress in Solid Mechanics, vol. 4, pp. 1-90, North-Holland, Amsterdam, 1963.
19. F. B. Hildebrand, E. Reissner, and G. B. Thomas, Notes on the Foundations of the Theory of Small Displacements of Orthotropic Shells, NACA TN 1833, 1949.
20. E. Reissner, Stress Strain Relations in the Theory of Thin Elastic Shells, J. Math. Phys., vol. 31, pp. 109-119, 1952.
21. P. M. Naghdi, On the Theory of Thin Elastic Shells, Quart. Appl. Math., vol. 14, pp. 369-380, 1957.
22. N. J. Pagano, Exact Solution for Composite Laminates in Cylindrical Bending, J. Compos. Mater., vol. 3, pp. 398-411, 1969.
23. N. J. Pagano, Exact Solution for Rectangular Bidirectional Composites and Sandwich Plates, J. Compos. Mater., vol. 4, pp. 20-34, 1970.
24. N. J. Pagano and S. J. Hatfield, Elastic Behavior of Multilayered Bidirectional Composites, AIAA J., vol. 10, pp. 931-933, 1972.
25. J. M. Whitney, The Effect of Boundary Conditions on the Response of Laminated Composites, J. Compos. Mater., vol. 3, pp. 534-547, 1969.
26. J. M. Whiteny and N. J. Pagano, Shear Deformation in Heterogeneous Anisotropic Plates, J. Appl. Mech., vol. 37, pp. 1031-1036, 1970.
27. R. C. Fortier and J. N. Rossettos, On the Vibration of Shear Deformable Curved Anisotropic Composite Plates, J. Appl. Mech., vol. 40, pp. 299-301, 1973.
28. P. K. Sinha and A. K. Rath, Vibration and Buckling of Cross-Ply Laminated Circular Cylindrical Panels, Aeronaut. Quart., vol. 26, pp. 211-218, 1975.
29. C. W. Bert and T. L. Chen, Effect of Shear Deformation on Vibration of Antisymmetric Angle-Ply Laminated Rectangular Plates, Int. J. Solid Struct., vol. 14, pp. 465-473, 1978.
30. J. N. Reddy and C. F. Liu, A Higher-Order Shear Deformation Theory of Laminated Elastic Shells, Int. J. Eng. Sci., vol. 23, pp. 319-330, 1985.
31. A. A. Khdeir and J. N. Reddy, Analytical Solutions of Refined Plate Theories of Cross-Ply Composite Laminates, J. Press. Vess., vol. 113, pp. 570-578, 1991.
32. J. N. Reddy and A. A. Khdeir, Buckling and Vibration of Laminated Composite Plates Using Various Plate Theories, AIAA J., vol. 27, pp. 1808-1817, 1989.
33. G. J. Simitses and J. S. Anastasiadis, Shear Deformable Theories for Cylindrical Laminates - Equilibrium and Buckling with Applications, AIM J., vol. 30, pp. 826-834, 1992.
34. N. N. Huang, Influence of Shear Correction Factors in the Higher Order Shear Deformation Laminated Shell Theory, Int. J. Solid Struct., vol. 31, pp. 1263-1277, 1994.
35. S. Di and H. Rothert, Solution of Laminated Cylindrical Shells Using an Unconstrained Third-Order Theory, Compos. Struct., vol. 32, pp. 667-680, 1995.
36. A. K. Nayak, S. J. Moy, and R. A. Shenoi, Free vibration Analysis of Composite Sandwich Plates Based on Reddy's Higher-Order Theory, Compos. Part B - Eng., vol. 33, pp. 505-519, 2002.
37. J. N. Reddy, A Generalization of Two Dimensional Theories of Laminated Composite Plates, Commun. Appl. Numer. Method, vol. 3, pp. 173-180, 1987.
38. J. N. Reddy, E. J. Barbero, and J. L. Teply, A Generalized Laminate Theory for the Analysis of Composite Laminates, Dept. Engng Sci. Mech., Rep. No. VPI-E-88.17, Virginia Tech. Blacksburg, VA, 1988.
39. J. N. Reddy and M. Savoia, Layer-Wise Shell Theory for Postbuckling of Laminated Circular Cylindrical Shells, AIM J., vol. 30, pp. 2148-2154, 1992.
40. M. Di Sciuva, An Improved Shear-Deformation Theory for Moderately Thick Multilayered Anisotropic Shells and Plates, J. Appl. Mech., vol. 54, pp. 589-596, 1987.
41. M. Di Sciuva, Bending, Vibration and Buckling of Simply Supported Thick Multilayered Orthotropic Plates: An Evaluation of a New Displacement Model, J. Sound Vib., vol. 105, pp. 425-442, 1986.
42. M. Di Sciuva, A Refined Transverse Shear Deformation Theory for Multilayered Anisotropic Plates, Atti Accad. Sci. Torin., vol. 118, pp. 279-295, 1984.
43. T. K. Varadan and K. Bhaskar, Bending of Laminated Orthotropic Cylindrical Shells - An Elasticity Approach, Compos. Struct., vol. 17, pp. 141-156, 1991.
44. J. G. Ren, Exact Solutions for Laminated Cylindrical Shells in Cylindrical Bending, Compos. Sci. Technol., vol. 29. pp. 169-187, 1987.
45. P. B. Xavier, K. H. Lee, and C. H. Chew, An improved Zig-Zag Model for the Bending of Laminated Composite Shells, Compos. Struct., vol. 26, pp. 123-138, 1993.
46. Z. Q. Cheng, L. H. He, and S. Kitipornchai, Influence of Imperfect Interfaces on Bending and Vibration of Laminated Composite Shells, Int. J. Solid Struct., vol. 37, pp. 2127-2150, 2000.
47. J. B. Greenberg and Y. Stavsky, Buckling of Composite Orthotropic Cylindrical Shells Under Non-Uniform Axial Loads, Compos. Struct., vol. 30, pp. 399-406, 1995.
48. G. Krizhevsky and Y. Stavsky, Refined Theory for Nonlinear Buckling of Heated Composite Shallow Spherical Shells, Comput. Struct., vol. 55, pp. 1007-1014, 1995.
49. G. Krizhevsky and Y. Stavsky, Refined Theory for Vibration and Buckling of Laminated Isotropic Annular Plates, Int. J. Mech. Sci., vol. 38. pp. 539-555, 1996.
50. P. M. Nagdhi, Theory of Shells and Plates, Handbuch der Physik, vol. Ia/2, pp. 425-640, Springer-Verlag, Berlin, 1972.
51. J. L. Ericksen and C. Truesdell, Exact Theory of Stress and Strain in Rods and Shells, Arch. Rat. Mech. Anal., vol. 1, pp. 295-323, 1957.
52. A. E. Green and P. M. Nagdhi, On the Derivation of Shell Theories by Direct Approach, Appl. Mech., vol. 40, pp. 173-176, 1974.
53. A. E. Green, P. M. Nagdhi, and W. L. Wainwright, A General Theory of a Cosserat Surface, Arch. Rat. Mech. Anal., vol. 20, pp. 287-308, 1965.
54. J. C. Simo and D. D. Fox, On a Stress Resultant Geometrically Exact Shell Model. Part I: Formation and Optimal Parametrization, Comput. Method Appl. Mech., vol. 72, pp. 267-304, 1989.
55. J. C. Simo, D. D. Fox, and M. S. Rifai, On a Stress Resultant Geometrically Exact Shell Model. Part II: The Linear Theory; Computational Aspects, Comput. Method Appl. Mech., vol. 73, pp. 53-92, 1989.
56. J. C. Simo, D. D. Fox, and M. S. Rifai, On a Stress Resultant Geometrically Exact Shell Model. Part III: Computational Aspects of the Nonlinear Theory, Comput. Method Appl. Mech., vol. 79, pp. 21-70, 1990.
57. C. Sansour and H. Bedarczyk, The Cosserat Surface as a Shell Model, Theory aand Finite Element Formulation, Comput. Method Appl. Mech., vol. 120, pp. 1-32, 1995.
58. J. Chroscielewski, I. J. Markovski, and H. Stumpf, Genuinely Resultant Shell Finite Elements Accounting for Geometric and Material Nonlinearity, Int. J. Nwmer. Method Eng., vol. 35, pp. 63-94, 1992.
59. C. Chinosi, L. Della Croce, and T. Scapolla, Hierarchic Finite Elements for Thin Naghdi Shell Model, Int. J. Solid Struct., vol. 35, pp. 1863-1880, 1998.
60. L. Librescu, Refined Geometrically Nonlinear Theories of Anisotropic Laminated Sells, Quart. Appl. Math., vol. 45, pp. 1-22, 1987.
61. L. Librescu and R. Schmidt, Refined Theories of Elastic Anisotropic Shells Accounting for Small Strains and Moderate Rotations, Int. J. Nonlinear Mech., vol. 23, pp. 217-229, 1988.
62. L. Librescu and M. Stein, Postbuckling of Shear-Deformable Composite Flat Panels Taking into Account Geometrical Imperfections, AIAA J., vol. 30, pp. 1352-1360, 1992.
63. L. Librescu and M. Y. Chang, Imperfection Sensitivity and Postbuckling Behavior of Shear-Deformable Composite Doubly-Curved Shallow Panels, Int. J. Solid Struct., vol. 29, pp. 1065-1083, 1992.
64. R. Schmidt and J. N. Reddy, A Refined Small Strain and Moderate Rotation Theory of Elastic Anisotropic Shells, J. Appl. Mech., vol. 55, pp. 611-617, 1988.
65. A. F. Palmerio, J. N. Reddy, and R. Schmidt, On a Moderate Rotation Theory of Laminated Anisotropic Shells, Part 1: Theory, Int. J. Nonlinear Mech., vol. 25, pp. 687-700, 1990.
66. A. F. Palmerio, J. N. Reddy, and R. Schmidt, On a Moderate Rotation Theory of Laminated Anisotropic Shells, Part 2: Finite-Element Analysis, Int. J. Nonlinear Mech., vol. 25, pp. 701-714, 1990.
67. I. Kreja, R. Schmidt, and J. N. Reddy, Finite Elements Based on a First-Order Shear Deformation Moderate Rotation Theory with Applications to the Analysis of Composite Structures, Int. J. Nonlinear Mech., vol. 32, pp. 1123-1142, 1997.
68. W. Pietraszkiewicz, Geometrically Nonlinear Theories of Thin Elastic Shells, Adv. Mech., vol. 12, pp. 52-130, 1989.
69. W. Pietraszkiewicz and J. Badur, Finite Rotation in the Description of Continuum Deformation, Int. J. Eng. Sci., vol. 21, pp. 1097-1115, 1983.
70. W. Pietraszkiewicz, Lagrangian Description and Incremental Formulation in the Nonlinear Theory of Thin Shells, Int. J. Nonlinear Mech., vol. 23, pp. 115-140, 1984.
71. Y. Basar, Finite-Rotation Theories for Composite Laminates, Acta Mech., vol. 98, pp. 159-176, 1993.
72. Y. Basar, A Consistent Theory of Geometrically Nonlinear Shells with an Independent Rotation Vector, Int. J. Solid Struct., vol. 23, pp. 1401-1415, 1987.
73. Y. Basar, Y. Ding, and R. Schultz, Refined Shear-Deformation Models for Composite Laminates with Finite Rotations, Int. J. Solid Struct., vol. 50, pp. 2611-2638, 1993.
74. M. Balah and H. N. Al-Ghamedy, Finite Element Formulation of a Third Order Laminated Finite Rotation Shell Element, Comput. Struct., vol. 80, pp. 1975-1990, 2002.
75. N. Büchter and E. Ramm, 3D-Extension of Nonlinear Shell Equations Based on the Enhanced Assumed Strain Concept, Computational Methods in Applied Science, pp. 55-62, Elsevier Science Publishers, Brussels, 1992.
76. C. Sansour, A Theory and Finite Element Formulation of Shells at Finite Deformations Involving Thickness Change: Circumventing the Use of a Rotation Tensor, Arch. Appl. Mech., vol. 65, pp. 194-216, 1995.
77. J. C. Simo, M. S. Rifai, and D. D. Fox, On a Stress Resultant Geometrically Exact Shell Model. Part IV: Variable Thickness Shells with Through-the Thickness Stretching, Comp. Method Appl. Mech., vol. 81, pp. 53-91, 1990.
78. M. Braun, M. Bischoff, and E. Ramm, Nonlinear Shell Formulations for Complete Three-Dimensional Constitutive Laws Including Composites and Laminates, Comput. Mecht., vol. 15, pp. 1-18, 1994.
79. N. Büchter, E. Ramm, and D. Roeh, Three-Dimensional Extension of Nonlinear Shell Formulation Based on the Enhanced Assumed Strain Concept, Int. J. Numer. Method, Eng., vol. 37, pp. 2551-2568, 1994.
80. M. Bischoff and E. Ramm, Shear Deformable Shell Elements for Large Strains and Rotations, Int. J. Numer. Method Eng., vol. 40, pp. 4427-4449, 1997.
81. M. Bischoff and E. Ramm, On the Physical Significance of Higher Order Kinematic and Static Variables in a Three-Dimensional Shell Formulation, Int. J. Solid Struct., vol. 37, pp. 6933-6960, 2000.
82. B. Brank, J. Korelc, and A. Ibrahimbegović, Nonlinear Shell Problem Formulation Accounting for Through-the-Thickness Stretching and Its Finite Element Implementation, Comput. Struct., vol. 80, pp. 699-717, 2002.
83. W. B. Krätzig, Best Transverse Shearing and Stretching Shell Theory for Nonlinear Finite Element Simulations, Comput. Method Appl. Mech., vol. 103, pp. 135-160, 1993.
84. J. N. Reddy, Analysis of Layered Composite Plates Accounting for Large Deflections and Transverse Shear Strains, in E. Hinton, D. Ower, and C. Taylor (Eds.), Recent Advances in Nonlinear Computational Mechanics, Pineridge Press Limited, Swansea, U.K., 1982.
85. J. N. Reddy, Overview of Shear Deformation Theories and Their Relationships to the Classical Theory, ASME Mech. Beh. Adv. Mater., vol. 84, pp. 245, 1998.
86. R. K. Kapania, A Review on the Analysis of Laminated Shells, ASME J. Press. Vess., vol. 111, pp. 88-96, 1989.
87. H. Yang, S. Saigal, and D. Liaw, Advances of Thin Shell Finite Elements and Some Applications - Version 1, Comput. Struct., vol. 36, pp. 481-504, 1990.
88. H. Yang, S. Saigal, A. Masud, and R. K. Kapania, A Survey of Recent Shell Finite Elements, Int. J. Numer. Method Eng., vol. 47, pp. 101-127, 2000.
89. R. A. Arciniega and J. N. Reddy, A Consistent Third-Order Shell Theory with Application to Bending of Laminated Composite Cylindrical Shells, AIAA J. submitted for publication.
90. L. Librescu, Elastostatics and Kinetics of Anisotropic and Heterogeneous Shell-Type Structures, Noordhoff, Leyden, 1975.
91. J. N. Reddy, On Refined Computational Models of Composite Laminates, Int. J. Numer. Method Eng., vol. 27, pp. 361-382, 1989.
92. G. Cantin and R. W. Clough, A Curved Cylindrical Shell Finite Element, AIAA J., vol. 6, pp. 1057-1062, 1968.
93. O. C. Zienkiewicz, The Finite Element Method, McGraw-Hill, New York, 1977.
94. O. C. Zienkiewicz, R. L. Taylor, and J. M. Too, Reduced Integration Techniques in General Analysis of Plates and Shells, Int. J. Numer. Method Eng., vol. 3, pp. 275-290, 1971.
95. H. Stolarski and T. Belytschko, Membrane Locking and Reduced Integration for Curve Elements, J. Appl. Mech., vol. 49, pp. 172-176, 1982.
96. E. Hinton and H. C. Huang, A Family of Quadrilateral Mindlin Plate Elements with Substitute Shear Strain Fields, Comput. Struct., vol. 23, pp. 409-431, 1986.
97. E. Dvorkin and K. J. Bathe, A Continuum Mechanics Based Four-node Shell Elements for General Nonlinear Analysis, Eng. Computation., vol. 1, pp. 77-88, 1984.
98. J. P. Pontaza and J. N. Reddy, Mixed Plate Bending Elements Based on Least-Squares Formulation, Int. J. Numer. Method Eng., vol. 60, pp. 891-922, 2004.
99. J. E. Gibson, The Design of Cylindrical Shell Roofs, Spon, London, 1961.
100. D. G. Ashwell, Strain Elements, with Applications to Arches, Rings and Cylindrial Shell, Finite Element for Thin Shells and Curved Members, Chap. 6, John Wiley and Sons, New York, 1976.
101. W. Flügge, Stresses in Shells, 2nd ed., Springer-Verlag, Berlin, 1973.
102. M. Cho and H. Y. Roh, Development of Geometrically Exact New Elements Based on General Curvilinear Coordinates, Int. J. Numer. Method Eng., vol. 56, pp. 81-115, 2003.
103. G. R. Heppler and J. S. Hansen, A Mindlin Element for Thick and Deep Shells, Comput. Method Appl. Mech., vol. 54, pp. 21-47, 1986.
104. R. H. Mac Neal and R. L. Harder, A Proposed Standard Set of Problems to Test Finite Element Accuracy, Finite Elem. Anal. Des., vol. 1, pp. 3-20, 1985.
105. A. E. Green and W. Zerna, Theoretical Elasticity, 2nd ed., Clarendon Press, Oxford, 1968.