Opportunities and challenges of spray forming high-alloyed steels

Materials Science and Engineering: A

Volumn 477, Issue 1-2, 2008, Pages 69-79

  Schulz, Alwin ^a   Uhlenwinkel, Volker ^a   Escher, Christoph ^b   Kohlmann, Rainer ^c   Kulmburg, Alfred ^d   Montero, Maria Carmen ^e   Rabitsch, Roland ^f   Schützenhöfer, Wolfgang ^f   Stocchi, Domenico ^g   Viale, Dominique ^h  

^a STIFTUNG INSTITUT FÜR WERKSTOFFTECHNIK   (Germany)

^b Dorrenberg Edelstahl GmbH   (Germany)

^c Edelstahlwerke Sudwestfalen GmbH   (Germany)

^d GRAZ UNIVERSITY OF TECHNOLOGY   (Austria)

^e SA ^*  (Spain)

^f Albert Putschoegl Boehler Edelstahl GmbH and Co KG   (Austria)

^g CENTRO SVILUPPO MATERIALI S P A   (Italy)

^h INDUSTEEL CRMC   (France)

Author keywords

Gas atomization; High alloyed steel; Mechanical property; Spray forming

Indexed keywords

COLD WORKING; COMPACTION; HOT WORKING; MECHANICAL PROPERTIES; SOLIDIFICATION; STEEL POWDER METALLURGY; TOUGHNESS; WEAR RESISTANCE;

GAS ATOMIZATION; HIGH-ALLOYED STEEL; SEMI-FINISHED MATERIALS; SPRAY FORMING;

STEEL;

COLD WORKING; COMPACTION; HOT WORKING; MECHANICAL PROPERTIES; SOLIDIFICATION; STEEL; STEEL POWDER METALLURGY; TOUGHNESS; WEAR RESISTANCE;

EID: 39449107229     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2007.08.082     Document Type: Article

References (30)

1. Lawley A., and Leatham A.G. Mater. Sci. Forum 299/300 (1999) 407-415
2. Cantor B., Baik K.H., and Grant P.S. Prog. Mater. Sci. 42 1-4 (1997) 373-392
3. Manson-Whitton E.D., Stone I.C., Jones J.R., Grant P.S., and Cantor B. Acta Mater. 50 (2002) 2517-2535
4. Lee E.-S., Park W.-J., Jung J.Y., and Ahn S. Metall. Mater. Trans. A 29 (1998) 1395-1404
5. Hribernik B., Jaeger H., and Hackl G. Int. Steel Met. Mag. 27 (1989) 761-766 (in Germen)
6. Schruff I., Schüler V., and Spiegelhauer C. In: Bergström J., Frederiksson G., Johannsson M., Kotik O., and Thurvander E. (Eds). The Use of Tool Steels: Experience and Research (2002), Karlstad University, Karlstad, Sweden 973-990
7. Schneider R., Schulz A., Bertrand C., Kulmburg A., Oldewurtel A., Uhlenwinkel V., and Viale D. In: Bergström J., Frederiksson G., Johannsson M., Kotik O., and Thurvander E. (Eds). The Use of Tool Steels: Experience and Research (2002), Karlstad University, Karlstad, Sweden 931-942
8. Leatham A. Steel World (1996) 91-93
9. Cui C.S., Schulz A., Fritsching U., Bauckhage K., and Mayr P. Int. J. Powder Met. 40 (2004) 49-53
10. Cui C.S., Fritsching U., and Schulz A. Met. Mater. Trans. B 38 (2007) 333-346
11. Zhang H., Luo Y., and Wang G. In: Bergström J., Frederiksson G., Johannsson M., Kotik O., and Thurvander E. (Eds). The Use of Tool Steels: Experience and Research (2002), Karlstad University, Karlstad, Sweden 915-921
12. Piotrowiak R., Schüler V., Schruff I., and Spiegelhauer C. HTM Z. Werkst. Waermebeh. Fertigung 59 (2004) 423-431 (in German)
13. Ernst C., and Duh D. J. Mater. Sci. 39 (2004) 6831-6834
14. Matsuo S., Ando T., and Grant N.J. Mater. Sci. Eng. A34 (2000) 34-41
15. Tsao C.-Y.A., and Grant N.J. Mater. Sci. Eng. A201 (1995) 261-268
16. Schulz A., Uhlenwinkel V., Bertrand C., Kohlmann R., Kulmburg A., Oldewurtel A., Schneider R., and Viale D. Mater. Sci. Eng. A383 (2004) 58-68
17. Müller H.R., Ohla K., Zauter R., and Ebner M. Mater. Sci. Eng. A383 (2004) 78-86
18. Wilson F.G., and Gladman T. Int. Mater. Rev. 33 (1988) 221-286
19. Gavriljuk V.G., and Berns H. High Nitrogen Steels (1999), Springer, Berlin, Germany
20. Berns H. Steel Res. 63 (1992) 343-347
21. Ferrarini C.F., Bolfarini C., Kiminami C.S., and Botta W.J. Mater. Sci. Eng. A 375-377 (2004) 577-580
22. Zhang G.-Q., Li Z., Tian S.-F., and Yan M.-G. J. Aeronaut. Mater. 26 (2006) 258-264 (in Chinese)
23. Stahl-Eisen-Prüfblatt 1614, "Mikroskopische Prüfung von Warmarbeitsstählen", VDEh, Düsseldorf, September 1996 (in German).
24. Stahl-Eisen-Prüfblatt 1314, "Schlagbiegeprobe-Beschreibung und Probenvorbereitung", VDEh, Düsseldorf, April 1990 (in German).
25. Bahrami F., and Hendry A. Mater. Sci. Technol. 11 (1995) 488-496
26. Feichtinger H.K., and Stein G. Mater. Sci. Forum 318-320 (1999) 261-270
27. Berns H., and Wendel F. Härterei-Tech. Mitt. 39 (1984) 120-125 (in German)
28. Popov V.V., and Goldshtein M.I. Met. Sci. Heat Treat. 33 (1991) 480-484
29. A903SC, Product information from Böhler Edelstahl GmbH, Kapfenberg, Austria.
30. ® 4462, Product information from Edelstahlwerke Südwestfalen GmbH, Siegen, Germany.