Evaluation of dynamic stress intensity factors and T-stress using the scaled boundary finite-element method

Engineering Fracture Mechanics

Volumn 75, Issue 8, 2008, Pages 1960-1980

  Song, Chongmin ^a   Vrcelj, Zora ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

Scaled boundary finite element method; Stress intensity factor; Stress singularity; Structural dynamics; T Stress

Indexed keywords

ASYMPTOTIC ANALYSIS; CRACKS; FINITE ELEMENT METHOD; INTEGRATION; STIFFNESS MATRIX; STRESS INTENSITY FACTORS; STRESSES; STRUCTURAL DYNAMICS; TIME DOMAIN ANALYSIS;

DYNAMIC STRESS INTENSITY FACTORS; SCALED BOUNDARY FINITE-ELEMENT METHOD; STRESS SINGULARITY;

PLATES (STRUCTURAL COMPONENTS);

ASYMPTOTIC ANALYSIS; CRACKS; FINITE ELEMENT METHOD; INTEGRATION; PLATES (STRUCTURAL COMPONENTS); STIFFNESS MATRIX; STRESS INTENSITY FACTORS; STRESSES; STRUCTURAL DYNAMICS; TIME DOMAIN ANALYSIS;

EID: 39149085351     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2007.11.009     Document Type: Article

References (46)

1. Williams M.L. On the stress distribution at the base of a stationary crack. J Appl Mech, ASME 24 (1957) 109-114
2. Rice J.R., and Sih G.C. Plane problems of cracks in dissimilar media. J Appl Mech, ASME 32 (1965) 418-423
3. Dempsey J.P., and Sinclair G.B. On the stress singularities in the plane elasticity of the composite wedge. J Elasticity 9 (1979) 373-391
4. Song Ch. Evaluation of power-logarithmic singularities, T-stresses and higher order terms of in-plane singular stress fields at cracks and multi-material corners. Engng Fract Mech 72 (2005) 1498-1530
5. Williams J.G., and Ewing P.D. Fracture under complex stress - angled crack problem. Int J Fract Mech 8 (1972) 441-446
6. Cotterell B., and Rice J.R. Slightly curved or kinked cracks. Int J Fract 16 (1980) 155-169
7. Rice J.R. A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech, ASME 35 (1968) 379-386
8. Henshell R.D., and Shaw K.G. Crack tip finite elements are unnecessary. Int J Numer Method Engng 9 (1975) 495-507
9. Martinez J., and Dominguez J. On the use of quarter-point boundary elements for stress intensity factor computations. Int J Numer Method Engng 120 (1984) 1941-1950
10. Cho S.B., Lee K.R., Choy Y.S., and Yuuki R. Determination of stress intensity factors and boundary element analysis for interface cracks in dissimilar anisotropic materials. Engng Fract Mech 43 (1992) 603-614
11. Carpenter W.C., and Byers C. A path independent integral for computing stress intensities for V-notched cracks in a bi-material. Int J Fract 35 (1987) 245-268
12. Banks-Sills L., and Sherer A. A conservative integral for determining stress intensity factors of a bimaterial notch. Int J Fract 115 (2002) 1-26
13. Tan C.L., and Wang X. The use of quarter-point crack-tip elements for T-stress determination in boundary element method analysis. Engng Fract Mech 70 (2003) 2247-2252
14. Kfouri A.P. Some evaluations of the elastic T-term using Eshelby's method. Int J Fract 30 (1986) 301-315
15. Fett T. T-stresses in rectangular plates and circular disks. Engng Fract Mech 60 (1998) 631-652
16. Chen H.S., Krause R., Pettit R.G., Banks-Sills L., and Ingraffea A.R. Numerical assessment of T-stress computation using a p-version finite element method. Int J Fract 107 (2001) 177-199
17. Sladek J., and Sladek V. Evaluations of the T-stress for interface cracks by the boundary element method. Engng Fract Mech 56 (1997) 813-825
18. Shah P.D., Tan C.L., and Wang X. Evaluation of T-stress for an interface crack between dissimilar anisotropic materials using the boundary element method. Comput Model Engng Sci 13 (2006) 185-197
19. Tong P., Pian T.H.H., and Lasary S.J. A hybrid-element approach to crack problems in plane elasticity. Int J Numer Method Engng 7 (1973) 297-308
20. Sih G.C., Ravera R.S., and Embley G.T. Impact response of a finite crack in plane extension. Int J Solid Struct 8 (1972) 977-993
21. Chen Y. Numerical computation of dynamic stress intensity factors by a Lagrangian finite-difference method (the HEMP code). Engng Fract Mech 7 (1975) 653-660
22. Dominguez J. Boundary elements in dynamics (1993), Computational Mechanics Publications, Southampton
23. Fedelinski P., and Aliabadi M.H. The dual boundary element method: over(J, ^)-integral for dynamic stress intensity factors. Int J Fract 65 (1994) 369-381
24. Chirino F., Gallego R., Saez A., and Dominguez J. A comparative study of three boundary element approaches to transient dynamic crack problems. Engng Anal Bound Elem 13 (1994) 11-19
25. Wen P.H., Aliabadia M.H., and Rooke D.P. A contour integral method for dynamic stress intensity factors. Theor Appl Fract Mech 27 (1997) 29-91
26. Albuquerque E.L., Sollero P., and Aliabadi M.H. The boundary element method applied to time dependent problems in anisotropic materials. Int J Solid Struct 39 (2002) 1405-1422
27. Zhang Ch. A 2D hypersingular time-domain traction BEM for transient elastodynamic crack analysis. Wave Motion 35 (2002) 17-40
28. Song S.H., and Paulino G.H. Dynamic stress intensity factors for homogeneous and smoothly heterogeneous materials using the interaction integral method. Int J Solid Struct 43 (2006) 4830-4866
29. Aliabadi M.H. The boundary element method. Application in solids and structures vol. 2 (2002), John Wiley & Sons
30. Dineva P., Gross D., and Rangelov T. Dynamic behavior of a bi-material interface-cracked plate. Engng Fract Mech 69 (2002) 1193-1218
31. Song Ch. A super-element for crack analysis in the time domain. Int J Numer Method Engng 61 (2004) 1332-1357
32. Sladek J., Sladek V., and Fedelinski P. Integral formulation for elastodynamic T-stresses. Int J Fract 84 (1997) 103-116
33. Sladek J., Sladek V., and Fedelinski P. Computation of the second fracture parameter in elastodynamics by the boundary element method. Adv Engng Softw 30 (1999) 725-734
34. Song Ch., and Wolf J.P. The scaled boundary finite-element method - alias consistent infinitesimal finite-element cell method - for elastodynamics. Comput Method Appl Mech Engng 147 (1997) 329-355
35. Song Ch., and Wolf J.P. Semi-analytical representation of stress singularity as occurring in cracks in anisotropic multi-materials with the scaled boundary finite-element method. Comput Struct 80 (2002) 183-197
36. Lindemann J., and Becker W. Free-edge stresses around holes in laminates by the boundary finite-element method. Mech Compos Mater 38 (2002) 407-416
37. Müller A., Wenck J., Goswami S., Lindemann J., Hohe J., and Becker W. The boundary finite element method for predicting directions of cracks emerging from notches at bimaterial junctions. Engng Fract Mech 72 (2005) 373-386
38. Song Ch. Analysis of singular stress fields at multi-material corners under thermal loading. Int J Numer Method Engng 65 5 (2006) 620-652
39. Yang Z.J., and Deeks A.J. Fully-automatic modelling of cohesive crack growth using a finite element-scaled boundary finite element coupled method. Engng Fract Mech 74 (2007) 2547-2573
40. Song Ch., and Wolf J.P. The scaled boundary finite-element method: analytical solution in frequency domain. Comput Method Appl Mech Engng 164 (1998) 249-264
41. Song Ch. The scaled boundary finite-element method in structural dynamics. Int J Numer Method Engng, submitted for publication.
42. Wolf J.P., and Song Ch. The scaled boundary finite-element method - a primer: derivations. Comput Struct 78 (2000) 191-210
43. Song Ch. A matrix function solution for the scaled boundary finite-element equation in statics. Comput Method Appl Mech Engng 193 (2004) 2325-2356
44. Gantmacher F.R. The theory of matrices (1977), Chelsea, New York
45. Moler C.B., and van Loan C. Nineteen dubious ways to compute the exponential of a matrix, twenty-five years later. SIAM Rev 45 (2003) 3-49
46. Laub A.J. A Schur method for solving algebraic Riccati equations. IEEE Trans Automat Contr AC-24 (1979) 913-921