Conceptual tribo-energetic analysis of cutting tool protective coating delamination in dry cutting of hard-to-cut aero engine alloys

International Journal of Advanced Manufacturing Technology

Volumn 36, Issue 3-4, 2008, Pages 213-225

  Abdel Aal, H A ^a   Nouari, M ^b   El Mansori, M ^b   Ginting, A ^c  

^a UNIVERSITY OF WISCONSIN PLATTEVILLE   (United States)

^b ARTS ET MÉTIERS PARISTECH   (France)

^c UNIVERSITY OF SUMATERA UTARA   (Indonesia)

Author keywords

Coating delamination; Hard to cut alloys; Temperature rise; Thermal conductivity; Titanium machining; Tool wear

Indexed keywords

CUTTING TOOLS; DELAMINATION; THERMAL CONDUCTIVITY; THERMAL EFFECTS; WEAR OF MATERIALS;

COATING DELAMINATION; TEMPERATURE RISE; THERMO MECHANICAL LOADING; TITANIUM MACHINING; TOOL WEAR;

PROTECTIVE COATINGS;

EID: 39049104959     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-006-0837-3     Document Type: Article

References (31)

1. Che Haron CH, Ginting A, Goh JH (2001) Wear of coated and uncoated carbides in turning tool steel. J Mater Process Technol 116(1):49-54
2. Jawaid A, Sharif S, Koksal S (2000) Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy. J Mater Process Technol 99(1):266-274
3. Fitzsimmons M, Sarin Vinod K (1995) Comparison of WCl-CH-H and WF-CH-H systems for growth of WC coatings. Surf Coat Technol 76-77(1-3):250-255
4. Cho S-S, Komvopoulos K (1997) Wear mechanisms of multi-layer coated cemented carbide cutting tools. J Tribol 119(1):8-17
5. Schintlmeister W, Wallgram W, Kanz J, Gigl K (1989) Cutting tool materials coated by chemical vapour deposition. Wear 100:153-169
6. Trent EM, Wright PK (2000) Metal cutting, 4th edn. Butterworth-Heinemann, Boston
7. Prengel HG, Jindal PC, Wendt KH, Santhanam AT, Hegde PL, Penich RM (2001) A new class of high performance PVD coatings for carbide cutting tools. 139(1):25-34
8. Dearnley PA, Grearson AN (1986) Evaluation of principal wear mechanism of cemented carbides and ceramics used for machining titanium alloys IMI318. J Mater Sci Technol 2:47-58
9. Nouari M, Molinari A (2005) Experimental verification of a diffusion tool wear model using a 42CrMo4 steel with an uncoated cemented tungsten carbide at various cutting speeds. Wear 259(7-12):1151-1159
10. Ginting A, Nouari M (2006) Experimental and numerical studies on the performance of alloyed carbide tool in dry milling of aerospace materials. J Mach Tools Manuf 46(7-8):758-768
11. Nouari M, Ginting A (2006) Wear characteristics and performance of multi-layer CVD-coated alloyed carbide tool in dry end milling of titanium alloy. Surf Coat Technol 200(18-19):5663-5676
12. Ginting A (1999) Tool-path generation for tapered machining features. Masters Thesis, Toyohashi University of Technology (TUT), Toyohashi, Japan
13. ISO (1989) ISO 8688-2 Tool life testing in milling-part 2. End milling. International Organization for Standardization, Geneva, Switzerland
14. Abdel-Aal HA (1999) On the bulk temperatures of dry rubbing metallic solid pairs. Int Commun Heat Mass Transf 26(4):587-596
15. Abdel-Aal HA (2001) On the influence of tribo-induced superheating on protective layer formation in dry sliding of metallic pairs. Int J Therm Sci 40(6):571-580
16. Pierson HO (2002) Handbook of refractory Carbides and Nitrides. William Andrew, NY, USA
17. Abdel-Aal HA (2001) On the connection of thermal dilatation to protective layer formation in the fretting of metallic tribo-specimens. Wear 247(1):76-87
18. Abdel-Aal HA (2001) Correlating thermal dilatation to protective layer formation in fretting wear. Int Commun Heat Mass Transf 28(1):97-106
19. Abdel-Aal HA (2000) On the influence of thermal properties on wear resistance of rubbing metals at elevated temperatures. J Tribol 122(3):657-660
20. Abdel-Aal HA (2000) The correlation between thermal property variation and high temperature wear transition of rubbing metals. Wear 237(1):147-151
21. Abdel-Aal HA (2005) On the role of intrinsic material response in failure of tribo systems. Wear 259(7-12):1372-1381
22. Abdel-Aal HA (1998) Error bounds of variable conductivity temperature estimates in frictionally heated contacts. Int Commun Heat Mass Transf 25(1):99-108
23. Salazar A (2003) On thermal diffusivity. Eur J Phys 24:351-358
24. Singh J, Alpas AT (1996) High-temperature wear and deformation processes in metal matrix composites. Metall Mater Trans A 27A:3135-3148
25. Zhang J, Alpas TA (1997) Transition between mild and severe wear in aluminium alloys. Acta Mat 45:513-528
26. Wilson S, Alpas AT (1997) Wear mechanism maps for metal matrix composites. Wear 212:41-49
27. Wang Z, Rajkupar KP (2000) Cryogenic machining of hard-to-cut materials. Wear 239:168-175
28. Hong SY, Imakos W, Jeong C (2001) New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. Int J Mach Tool Manuf 41:2245-2260
29. Kim SW, Lee DW, Kang MC, Kim JS (2001) Evaluation of machining by cutting environments in high speed milling of difficult to cut materials. J Process Technol 111:256-260
30. Wanigarathne PC, Kardekar AD, Dillon OW, Poulachon G, Jawahir IS (2005) Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature. Wear 259:1215-1224
31. Rossi F, Sermet E, Poulachon, Dillon OW, Saito K, Jawahir IS (2001) Numerical and experimental studies on temperature distribution in machining with flat-faced and grooved tools. In: Proceedings of the ESAFORM 2001, Liege, Belgium