Effect of the membrane wettability on the size and size distribution of microbubbles formed from Shirasu-porous-glass (SPG) membranes

Colloids and Surfaces A: Physicochemical and Engineering Aspects

Volumn 317, Issue 1-3, 2008, Pages 146-154

  Kukizaki, Masato ^a   Wada, Tsubasa ^b  

^a Miyazaki Prefecture Industrial Technology Center   (Japan)

^b JAPAN SCIENCE AND TECHNOLOGY AGENCY   (Japan)

Author keywords

Monodispersed microbubbles; Organosilane compound; Shirasu porous glass membrane; Surface modification; Surface wettability

Indexed keywords

BUBBLES (IN FLUIDS); HYDROCARBONS; SIZE DISTRIBUTION; SURFACE ACTIVE AGENTS; SURFACE TREATMENT; WETTING;

MONODISPERSED MICROBUBBLES; ORGANOSILANE COMPOUNDS; SHIRASU POROUS GLASS MEMBRANE (SPG); SURFACE WETTABILITY; SURFACTANT SOLUTIONS;

GLASS MEMBRANE ELECTRODES;

DODECYL SULFATE SODIUM; SILANE DERIVATIVE;

AQUEOUS SOLUTION; ARTICLE; CHEMICAL REACTION; CONTACT ANGLE; HEATING; MICROBUBBLE; PARTICLE SIZE; POROSITY; PRIORITY JOURNAL; REACTION ANALYSIS; SURFACE PROPERTY; WETTABILITY;

EID: 38949154053     PISSN: 09277757     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.colsurfa.2007.10.005     Document Type: Article

References (40)

1. Skyba D.M., and Kaul S. Advances in microbubble technology. Coron. Artery Dis. 11 (2000) 211-219
2. Ganan-Calvo A.M., and Gordillo J.M. Perfectly monodisperse microbubbling by capillary flow focusing. Phys. Rev. Lett. 87 (2001) 274501/1-274501/4
3. Shafi M.A., Lee J.G., and Fulmerfelt R.W. Prediction of cellular structure in free expansion polymer foam processing. Polym. Eng. Sci. 36 (1996) 1950-1959
4. Maier C.G. Producing small bubbles of gas in liquids by submerged orifices. U.S. Burean Mines Bull. 260 (1927) 62-121
5. Tadaki T., and Maeda S. The size of bubbles from single orifices. Kagaku Kogaku Ronbunshu 27 (1963) 147-155 (in Japanese)
6. Sullivan S.L., Hardy B.W., and Holland C.D. Formation air bubbles at orifices submerged beneath liquids. AIChE J. 10 6 (1964) 848-854
7. Titomanlio G., Rizzo G., and Acierno D. Gas bubble formation from submerged orifices. Chem. Eng. Sci. 31 (1976) 403-404
8. Tsuge T., and Hibino S. Effect of column diameter on the volume of bubble formed from a submerged single orifice. Kagaku Kogaku Ronbunshu 5 (1979) 361-365 (in Japanese)
9. Takahashi T., and Miyahara T. Bubble volume formed at submerged orifices. Kagaku Kogaku Ronbunshu 5 (1979) 453-456 (in Japanese)
10. Tsuge H., Hibino S., and Nojima U. Volume of a bubble formed at a single submerged orifice in a flowing liquid. Int. Chem. Eng. 21 4 (1981) 630-636
11. Tsuge T., and Hibino S. Bubble formation from an orifice submerged in liquids. Chem. Eng. Commun. 22 (1983) 63-79
12. Terasaka K., and Tsuge H. Bubble formation at a single orifice in highly viscous liquids. J. Chem. Eng. Jpn. 23 (1990) 160-165
13. Iguchi M., Kaji M., and Morita Z. Effects of pore diameter, bath surface pressure, and nozzle diameter on the bubble formation from a porous nozzle. Metall. Mater. Trans. B 29B (1998) 1209-1218
14. Loubiere K., and Hebrard G. Bubble formation from a flexible hole submerged in an inviscid liquid. Chem. Eng. Proc. 58 (2003) 135-148
15. Terasaka K., Murata S., and Tsutsumino K. Bubble distribution in shear flow of highly viscous liquids. Can. J. Chem. Eng. 81 (2003) 470-475
16. Koide K., Kato S., Tanaka Y., and Kubota H. Bubbles generated from porous plate. J. Chem. Eng. Jpn. 1 (1968) 51-56
17. Sotelo J.L., Benitez F.J., Beltran-Herdia J., and Rodriguez C. Gas holdup and mass transfer coefficients in bubble columns. 1. Porous glass-plate diffusers. Int. Chem. Eng. 34 (1994) 82-90
18. Miyahara T., and Tanaka A. Size of bubbles generated from porous plates. J. Chem. Eng. Jpn. 30 (1997) 353-355
19. Fujikawa S., Zhang R., Hayama S., and Peng G. The control of micro-air-bubble generation by a rotational porous plate. Int. J. Multiphase Flow 29 (2003) 1221-1236
20. Tadaki T., and Maeda S. The size of bubbles from perforated plates. Kagaku Kogaku Ronbunshu 27 (1963) 402-406 (in Japanese)
21. Miyahara T., Matsuba Y., and Takahashi T. Size of bubbles generated from perforated plates. Kagaku Kogaku Ronbunshu 8 (1982) 13-17 (in Japanese)
22. Ledakowicz S., Maciejewska R., and Perkowski J. Ozonation of reactive blue 81 in the bubble column. Water Sci. Technol. 44 (2001) 47-52
23. Painmanakul P., Loubiere K., Hebrard G., and Buffiere P. Study of different membrane spargers used in waste water treatment: characterization and performance. Chem. Eng. Proc. 43 (2004) 1347-1359
24. Garstecki P., Gitlin I., Diluzio W., Kumacheva E., Stone H.A., and Whitesides G.M. Formation of monodisperse bubbles in a microfluidic focusing device. Appl. Phys. Lett. 85 (2004) 2649-2651
25. Garstecki P., Stone H.A., and Whitesides G.M. Mechanism for flow-rate controlled breakup in confined geometries. Appl. Phys. Lett. 94 (2005) 164501/1-164501/4
26. Yasuno M., Sugiura S., Iwamoto S., Nakajima M., Shono A., and Satoh K. Monodispersed microbubble formation using microchannel technique. AIChE J. 50 (2004) 3227-3233
27. Xu J.H., Li S.W., Chen G.G., and Luo G.S. Formation of monodisperse microbubbles in a microfluidic device. AIChE J. 52 (2006) 2254-2259
28. Kukizaki M., Nakashima T., Song G., and Kohama Y. Monodispersed nanobubbles generated from porous glass membrane and bubble size control. Kagaku Kogaku Ronbunshu 30 (2004) 654-659 (in Japanese)
29. Kukizaki M., and Goto M. Spontaneous formation behavior of uniform-sized microbubbles from Shirasu porous glass (SPG) membranes in the absence of water-phase flow. Colloids Surf. A 296 (2007) 174-181
30. Nakashima T., Shimizu M., and Kukizaki M. Mechanical strength and thermal resistance of porous glass. J. Ceram. Soc. Jpn. 100 (1992) 1411-1415 (in Japanese)
31. Nakashima T., Shimizu M., and Kukizaki M. Particle control of emulsion by membrane emulsification and its applications. Adv. Drug Deliv. Rev. 45 (2000) 47-56
32. 2 system. Membrane 29 (2004) 301-308
33. Yasuda H.K., and Lin J.N. Small bubbles oxygenation membrane. J. Appl. Polym. Sci. 90 (2003) 387-398
34. Imada K., Sakaue K., Kawabata H., Tsutsumi N., Nakashima T., and Nobuhara K. Studies on the internal surface of porous glass and chemical modification thereof. Nippon Kagaku Kaishi 4 (1990) 407-413 (in Japanese)
35. Kai T., Suma Y., Ono S., Yamaguchi T., and Nakao S. Effect of the pore surface modification of an inorganic substrate on the plasma-grafting behavior of pore-filling-type organic/inorganic composite membranes. J. Polym. Sci. Part A 44 (2005) 846-856
36. Brzoska J.B., Azouz I.B., and Rondelez F. Silanization of solid substrates: a step toward reproducibility. Langmuir 10 (1994) 4367-4373
37. Takei T., Yamazaki A., Watanabe T., and Chikazawa M. Water adsorption properties on porous silica glass surface modified by trimethyl groups. J. Colloids Interf. Sci. 188 (1997) 409-414
38. Kuraoka K., Chujo Y., and Yazawa T. Hydrocarbon separation via porous glass membranes surface-modified using organosilane. J. Membr. Sci. 182 (2001) 139-149
39. Jin T., Kuraoka K., and Yazawa T. Preparation of surface-modified porous membranes and their pervaporation properties. Desalination 148 (2002) 17-18
40. Kukizaki M., and Goto M. Size control of nanobubbles generated from Shirasu-porous-glass (SPG) membranes. J. Membr. Sci. 281 (2006) 386-396