Physicomechanical and magnetic properties of neoprene based rubber ferrite composites

Polymer - Plastics Technology and Engineering

Volumn 47, Issue 2, 2008, Pages 137-146

  Prema, K H ^a,b   Kurian, Philip ^a   Joy, P A ^c   Anantharaman, M R ^a  

^a Department of Physics   (India)

^b S D College   (India)

^c NATIONAL CHEMICAL LABORATORY   (India)

Author keywords

Ferrite; Flexible magnets; Neoprene rubber; Rubber ferrite composites; Sol gel method

Indexed keywords

CHARACTERIZATION; COMPOSITE MATERIALS; FERRITE; MAGNETIC PROPERTIES; MAGNETIZATION; MAGNETOMETERS; MAGNETS; MECHANICAL PROPERTIES; NICKEL; PHYSICAL PROPERTIES; SOL-GEL PROCESS; X RAY DIFFRACTION ANALYSIS;

FLEXIBLE MAGNETS; NEOPRENE RUBBER; NICKEL FERRITE; RUBBER FERRITE COMPOSITES;

RUBBER;

CHARACTERIZATION; COMPOSITE MATERIALS; FERRITE; MAGNETIC PROPERTIES; MAGNETIZATION; MAGNETOMETERS; MAGNETS; MECHANICAL PROPERTIES; NICKEL; PHYSICAL PROPERTIES; RUBBER; SOL-GEL PROCESS; X RAY DIFFRACTION ANALYSIS;

COMPOSITE; MECHANICAL PROPERTY; SYNTHESIS; SYNTHETIC RUBBER;

EID: 38849177486     PISSN: 03602559     EISSN: 15256111     Source Type: Journal    
DOI: 10.1080/03602550701815946     Document Type: Article

References (26)

1. Yavuz, O., Ram, M. K., Aldissi, M., Poddar, P. and Hariharan, S. (2005) Synthesis and the physical properties of MnZn ferrite and NiMnZn ferrite-polyaniline nanocomposite particles. J. Mater. Chem., 15, pp. 810-817.
2. Sakamoto, R. (1987) Electrically-conductive rubbers with carbon black 3 electrically conductive rubber. Intl. Polymer Sci. Tech., 14:4, pp. T/ 40-T/47.
3. Mohammed, E. M., Malini, K. A., Joy, P. A., Kulkarni, S. D., Date, S. K., Kurian, P. and Anantharaman, M. R. (2002) Processability, hardness and magnetic properties of rubber ferrite composites containing manganese zinc ferrites. Plas. Rub. Comp., 31:3, pp. 106-113.
4. Anantharaman, M. R., Sindhu, S., Jagathesan, S., Malini, K. A. and Kurian, P. (1999) Dielectric properties of rubber ferrite composites containing mixed ferrites. J. Phy. D. Appl. Phy., 32, pp. 1801-1810.
5. Annadurai, P., Mallic, A. K. and Tripathy, D. K. (2002) Studies on microwave shielding materials based on ferrite and carbon black-filled EPDM rubber in the X-band. J. App. Polymer Sci., 83, pp. 145-150.
6. Makled, M. H., Matsui, T., Tsuda, H., Mabuchi, H., El-Mansy, M. K. and Morii, K. (2005) Magnetic and dynamic mechanical properties of barium ferrite-natural rubber composites. J. Mat. Proc. Tech., 160, pp. 229-233.
7. Marrett, C., Moulart, A. and Colton, J. (2003) Flexible polymer composite electromagnetic crystals. Polymer Eng. Sci., 43:4, pp. 822-830.
8. Kraus, G. (1978) Reinforcement of elastomers by carbon black. Rub. Chem. Tech., 51:1, pp. 297-321.
9. Sobhy, M. S., El-Nashar, D. E. and Maziad, N. A. (2003) Cure characteristics and physicomechanical properties of calcium carbonate reinforcement rubber composites. Egypt. J. Sol., 26:2, pp. 241-257.
10. Kohjiya, S. and Ikeda, Y. (2000) Reinforcement of general-purpose grade rubbers by silica generated in situ. Rub. Chem. Tech., 73:3, pp. 534-550.
11. Wolf, S. and Wang, M. -J. (1992) Filler-elastomer interactions. The effect of the surface energies of fillers on elastomer reinforcement. Rub. Chem. Tech., 65:2, pp. 329-342.
12. Rigbi, Z. and Jilken, L. (1983) The response of an elastomer filled with soft ferrite to mechanical and magnetic influences. J. Mag. Mag. Mat., 37, pp. 267-276.
13. Saini, D. R., Shenoy, A. V. and Nadkarni, V. M. (1984) Dynamic mechanical properties of highly loaded ferrite filled thermoplastic elastomer. J. App. Polymer Sci., 29:12, pp. 4123-4143.
14. Soloman, M. A., Kurian, P., Anantharaman, M. R. and Joy, P. A. (2004) Evaluation of the magnetic and mechanical properties of rubber ferrite composites containing strontium ferrite. Polymer-Plastics Tech. Eng., 43:4, pp. 1013-1028.
15. Son, S., Taheri, M., Carpenter, E., Harris, V. G. and McHenry, M. E. (2002) Synthesis of ferrite and nickel ferrite using radio-frequency thermal plasma torch. J. App. Phy., 91:10, pp. 7589-7591.
16. Valenzuela, R. (1994) Magnetic Ceramics,, Cambridge University Press, New York
17. 4 ultrafine particles prepared by co-precipitation/ mechanical alloying. J. Mag. Mag. Mat., 205, pp. 249-254.
18. 4 powders. Jap. J. App. Phy., 43:8, pp. 5249-5252.
19. Morton, M. (1995) Rubber Technology,, Van Nostrand Reinold Company, New York
20. Malini, K. A., Mohammed, E. M., Sindhu, S., Joy, P. A., Date, S. K., Kulkarni, S. D., Kurian, P. and Anantharaman, M. R. (2001) Magnetic and processability studies on rubber ferrite composites based on natural rubber and mixed ferrite. J. Mat. Sci., 36, pp. 5551-5557.
21. 4. J. Mag. Mag. Mat., 302, pp. 190-195.
22. Subramanyam, K. N. (1971) Neutron and X-ray diffraction studies of certain doped nickel ferrites. J. Phys. C: Solid State Phy., 4, pp. 2266-2268.
23. da Costa, H. M., Visconte, L. L. Y., Nunes, R. C. R. and Furtado, C. R. G. (2004) Rice husk ash filled natural rubber compounds - the use of rheometric data to qualitatively estimate optimum filler loading. Intl. J. Polym. Mat., 53, pp. 475-497.
24. Wolf, S. (1996) Chemical aspects of rubber reinforcement by fillers. Rub. Chem. Tech., 69:3, pp. 325-346.
25. Ramesan, M. T. (2004) The effects of filler content on cure and mechanical properties of dichlorocarbene modified styrene butadiene rubber/carbon black composites. J. Polymer Res., 11, pp. 333-340.
26. Pal, P. K. and De, S. K. (1983) Studies of polymer-filler interaction, network structure, physical properties and fracture of silica and clay-filled EPDM rubber in the presence of a silane coupling agent. Rub. Chem. Tech., 56:4, pp. 737-773.