Particle in-flight behavior and its influence on the microstructure and mechanical properties of plasma-sprayed Al2O3 coatings

Journal of the European Ceramic Society

Volumn 28, Issue 6, 2008, Pages 1143-1148

  Yin, Zhijian ^a,b   Tao, Shunyan ^a   Zhou, Xiaming ^a   Ding, Chuanxian ^a  

^a SHANGHAI INSTITUTE OF CERAMICS   (China)

^b UNIVERSITY OF CHINESE ACADEMY OF SCIENCES   (China)

Author keywords

Adhesion strength; Al2O3 coating; In flight behavior; Microhardness; Plasma spraying

Indexed keywords

ALUMINA; BOND STRENGTH (MATERIALS); CRYSTAL MICROSTRUCTURE; MICROHARDNESS; PARTICLE SIZE; PLASMA SPRAYING; POROSITY; STRUCTURE (COMPOSITION); TEMPERATURE DISTRIBUTION; VELOCITY; WEIBULL DISTRIBUTION;

GRAIN FRACTION; PARTICLE IN-FLIGHT BEHAVIOR;

CERAMIC COATINGS;

ALUMINA; BOND STRENGTH (MATERIALS); CERAMIC COATINGS; CRYSTAL MICROSTRUCTURE; MICROHARDNESS; PARTICLE SIZE; PLASMA SPRAYING; POROSITY; STRUCTURE (COMPOSITION); TEMPERATURE DISTRIBUTION; VELOCITY; WEIBULL DISTRIBUTION;

EID: 38849111336     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2007.09.050     Document Type: Article

References (34)

1. Ctibor P., Bohac P., Stranyanek M., and Ctvrtlik R. Structure and mechanical properties of plasma sprayed coatings of titania and alumina. J. Eur. Ceram. Soc. 26 (2006) 3509-3514
2. Kezelis R., and Brinkiene K. Effect of alumina addition on the microstructure of plasma sprayed YSZ. J. Eur. Ceram. Soc. 25 (2005) 2181-2184
3. Sarikaya O. Effect of some parameters on microstructure and hardness of alumina coatings prepared by the air plasma spraying process. Surf. Coat. Technol. 190 (2005) 388-393
4. Chen H., Ding C.X., Zhang P.Y., La P.Q., and Lee S.W. Wear of plasma-sprayed nanostructured zirconia coatings against stainless under distilled-water conditions. Surf. Coat. Technol. 173 (2003) 144-149
5. McPherson R. On the formation of thermally sprayed alumina coatings. Mater. Sci. 15 (1980) 3141-3149
6. Dykhuizen R.C. Review of impact and solidification of molten thermal spray droplets. J. Therm. Spray Technol. 3 (1994) 351-361
7. 3 using on-line particle monitoring. Surf. Coat. Technol. 168 (2003) 186-190
8. Herold T.G., Prask H.J., Barker J., et al. Microstructure, mechanical properties and adhesion in IN625 air plasma sprayed coatings. Mater. Sci. Eng. A 421 (2006) 77-85
9. 2 particle in plasma spraying. Surf. Coat. Technol. 201 (2007) 5671-5675
10. Guessasma S., Montavon G., and Coddet C. Velocity and temperature distributions of alumina-titania in-flight particles in the atmospheric plasma spray process. Surf. Coat. Technol. 192 (2005) 70-76
11. Fukanuma H., Ohno N., Sun B., and Huang R. In-flight particle velocity measurements with DPV-2000 in cold spray. Surf. Coat. Technol. 201 (2006) 1935-1941
12. Gao Y., Xu X.L., Yan Z.J., and Xin G. High hardness alumina coatings prepared by low power plasma spraying. Surf. Coat. Technol. 154 (2002) 189-193
13. Lin X.H., Zeng Y., Lee S.W., and Ding C.X. Characterization of alumina-3wt% titania coating prepared by plasma spraying of nanostructured powders. J. Eur. Ceram. Soc. 24 (2004) 627-634
14. Liang B., and Ding C.X. Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying. Surf. Coat. Technol. 197 (2005) 185-192
15. Deshpande S., Kulkarni A., Sampath S., and Herman H. Application of image analysis for characterization of porosity in thermal spary coatings and correlation with small angle neutron scattering. Surf. Coat. Technol. 187 (2004) 6-16
16. Boudi A.A., Hashmi M.S.J., and Yilbas B.S. HVOF coating of inconel 625 onto stainless and carbon steel surfaces: corrosion and bonding testing. J. Mater. Process. Technol. 155-156 (2004) 2051-2055
17. ASTM Designation C 633-79, Standard test method for adhesion or cohesive strength of flame sprayed coatings, 1979.
18. Westhoff R., Trapaga G., and Szekely J. Plasma-particle interactions in plasma spraying systems. Metall. Trans. B 23B (1992) 683-689
19. 2. Surf. Coat. Technol. 141 (2001) 115-127
20. Wan Y.P., Sampath S., Prasad V., Williamson R., and Fincke J.R. An advanced model for plasma spraying of functionally graded materials. J. Mater. Process. Technol. 137 (2003) 110-116
21. Smith W., Jewett T.J., Sampath S., Swank W.D., and Fincke J.R. In: Berndt C.C. (Ed). Thermal Spray: A United Forum for Scientific and Technological Advances (1997), ASM International, Materials Park, OH 599-605
22. McPherson R. The relationship between the mechanism of formation, microstructure and properties of plasma-sprayed coatings. Thin Solid Films 83 (1981) 297-310
23. Guilemany J.M., Nutting J., and Dougan M.J. A transmission electron microscopy study of the microstructures present on alumina coatings produced by plasma spraying. J. Therm. Spray Technol. 6 (1997) 425-429
24. Kulkarni A., Gutleber J., et al. Studies of the microstructure and properties of dense ceramic coatings produced by high-velocity oxygen-fuel combustion spraying. Mater. Sci. Eng. A 369 (2004) 124-137
25. Harmsworth P.D., and Stevens R. Phase composition and properties of plasma-sprayed Zirconia thermal barrier coatings. J. Mater. Sci. 27 (1992) 616-624
26. Kesler O., Matejicek J., Sampath S., Suresh S., Gnaeupel-Herold T., Brand P.C., and Prask H.J. Measurement of residual stress in plasma-sprayed metallic, ceramic and composite coatings. Mater. Sci. Eng. A 257 (1998) 215-224
27. Xie Y., and Hawthorne H.M. Wear mechanism of plasma-sprayed alumina coating in sliding contacts with harder asperities. Wear 225-229 (1999) 90-103
28. 3-based cermet coatings. Wear 230 (1999) 70-77
29. Lima R.S., Kucuk A., and Berndt C.C. Bimodal distribution of mechanical properties on plasma sprayed nanostructured partially stabilized zirconia. Mater. Sci. Eng. A 327 (2002) 224-232
30. 2-NiCr coatings using Knoop indentation testing. Surf. Coat. Technol. 135 (2001) 29-237
31. Sturgeon A.J., et al. ITSC-95 Conference Proceedings, vol. 2 (1995) 669-673
32. Safai S., and Herman H. Microstructural investigation of plasma sprayed aluminum coatings. Thin Solid Films 45 (1977) 295-307
33. 3 coatings sprayed by a low power plasma torch with a novel hollow cathode. Thin Solid Films 450 (2004) 282-289
34. Li C.J., and Ohmori A. Relationships between the microstructure and properties of thermally sprayed deposits. J. Therm. Spray. Technol. 11 (2003) 365-374