Minerals and iron-making reactions in blast furnaces

Progress in Energy and Combustion Science

Volumn 34, Issue 2, 2008, Pages 155-197

  Gupta, S ^a,b   French, D ^a,c   Sakurovs, R ^a,c   Grigore, M ^a,b   Sun, H ^a,b   Cham, T ^a,b   Hilding, T ^d   Hallin, M ^e   Lindblom, B ^e   Sahajwalla, V ^a,b  

^a Cooperative Research Centre for Coal in Sustainable Development ^*  (Australia)

^b UNIVERSITY OF NEW SOUTH WALES   (Australia)

^c CSIRO   (Australia)

^d CSIRO Energy Technology ^*  (Australia)

^e LKAB   (Sweden)

Author keywords

Blast furnace; Carburization; Coke; CSR; Fines; Gasification; Graphitization; Minerals; Slag

Indexed keywords

COKE; GASIFICATION; GRAPHITIZATION; SLAGS;

CATALYTIC PHASES; EXPERIMENTAL BLAST FURNACE (EBF); OF HOT-METAL CARBURIZATION;

BLAST FURNACES;

EID: 38749146318     PISSN: 03601285     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pecs.2007.04.001     Document Type: Review

References (173)

1. Ishii K. Advanced pulverised coal injection technology and blast furnace operation (2000), Pergamon Publishers, Oxford
2. Biswas A.K. Principles of ironmaking (1981), Cootha Publishing, Australia
3. Peacey J.G., and Davenport W.G. The iron blast furnace-theory & practice (1979), Pergamon, London
4. Hutny W.P., Lee G.K., and Price J.T. Prog Energy Combust Sci 17 (1991) 373
5. Shevlin M., Fryer J., and Baird T. Carbon 24 5 (1986) 527
6. Kojima, Nishi K., Yamaguchi T., Nakama H., and Ida S. Trans ISIJ 17 (1977) 401
7. Iwanaga Y., and Takatani K. Trans ISIJ 28 12 (1988) 990
8. Vogt D., and Depoux M. Fuel Process Technol 24 (1990) 99
9. Shigang L. Ironmaking Steelmaking 18 1 (1991) 21
10. Kerkonnen O, Mattila E, Heiniemi R. In: 55th Ironmaking conference proceedings, 24-27 March, Pittsburgh. ISS Warrendale, USA, 1996. p. 275.
11. Chung J., and Huri N. ISIJ Int 37 2 (1997) 119-125
12. van der T, Alvarez R, Ferraro M, Fohl J, Hofherr K, Huart JM, Mattila E, Propson R, Willmers R, van der Velden B. In: Third European iron congress proceedings, 1996. p. 28.
13. van der Velden B, Trouw J, Chaigneau R, van der Berg J. In: 58th ironmaking conference proceedings, ISS Warrendale, USA, 1999. p. 275.
14. Vogt D, Negro P, Isler D. In: 57th ironmaking conference proceedings, 25-28 March, Toronto, ISS Warrendale, USA, 1998. p. 741.
15. Bertling H. ISIJ Int 39 7 (1999) 617
16. Srivastava RN, Singh LR, Datta S, Satyanarayana B, Ahmed S, Singh SB. In: 60th ironmaking conference proceedings, ISS Warrendale, USA, 2001. p. 71.
17. Kashiwaya Y., Takahata M., Ishii K., Yamaguchi K., Naito, and Hasegawa H. Tetsu-to-Hagane 87 5 (2001) 259
18. Gudenau HW, Senk D, Fukada K, Babich A, Fröhling C. In: International blast furnace lower zone symposium, Wollongong, The AIMM, Australia, vol. 11, 2002. p. 1.
19. Yamaoka H., Suyama S., and Nakano K. ISIJ Int 43 1 (2003) 44
20. Yamaoka H., and Suyama S. ISIJ Int 43 3 (2003) 338
21. Gupta S., Sahajwalla V., Burgo J., Chaubal P., and Youmans T. Metall Mater Trans 36B (2005) 385
22. Beppler E., Gerstenberg B., Jahnsen U., and Peters M. Cokemaking Int 2 (1994) 15
23. Mott R.A. Steel Times Annu Rev 843 (1977)
24. Best MH, Burgo JA, Valia HS. In: Ironmaking conference proceedings, Nashville, Tennessee, USA, 2002. p. 213.
25. Thompson RR, Mantione AF, Aikman RP. Blast furnace and steel plant, March 2 1971.
26. Sakurovs R, Burke L, Gawronski E. ACARP project report C9052, Australia, 2002. p. 24.
27. Coin CDA. ACARP project report no. C1605, Australia, 1995.
28. Patrick JW, Wilkinson HC. Coke reactivity-the yearbook of the coke oven managers' association, 1983. p. 191.
29. Price JT, Iliffe MJ, Khan MA, Gransden JF. In: 53rd ironmaking conference proceedings, ISS Warrendale, USA, 1994. p. 79.
30. Ward C.R., Taylor J.C., Matulis C.E., and Dale L.S. J Coal Geol 46 (2001) 67
31. Ward C.R. Int J Coal Geol 50 (2002) 135
32. Quinn G, Faraj B, Callcott R, Callcott T. ACARP report no. C10054, Australia, 2002.
33. Ward CR, French D. In: 12th international conference on coal SCIENCE, Cairns, Australia. 2003.p. 11.
34. Sakurovs R, French D. In: 21st international Pittsburgh coal conference proceeding, Osaka, Japan, 2004.
35. Gill WW, Brown NA, Coin CDA, Dubrawski JV, Rogers H, Scaife PH. NERDDC report no. 133, Australia, 1983.
36. Gill WW, Brown NA, Coin CDA, Mahoney MA. In: Ironmaking conference proceedings, ISS Warrendale, USA, vol. 44, 1985. p. 233.
37. Horrocks KRS, Cunningham RB, Ellison JF, Nightingale RJ. In: Fourth European coke and ironmaking congress, Paris, 2000. p. 167.
38. Grafeuille F, Jusseau N, Schnieider M, Mosser F, Nicolle R. In: Second European ironmaking conference proceeding, London, 1992. p. 205.
39. Babich I., Gudenau H.W., Mavrommatis K.T., Froehling C., Formoso A., Cores A., et al. Rev Metal Madrid 38 (2002) 288
40. Edstrom J.O., and von Scheele J. Scand J Metall 22 2 (1993) 16
41. Gupta S., Al-omari Y., Sahajwalla V., and French D. Metall Mater Trans 37B (2006) 457
42. Steiler JM, Hanrot F. In: Science and technology of innovative ironmaking for aiming at energy half consumption, Tokyo, Japan, 2003. p. 237.
43. Steiler JM, Nicolle R, Negro P, Helleisen M, Jusseau N, Metz B, Thirion C. In: Ironmaking conference proceedings, ISS, Washington, DC, 1991.p 715.
44. Gupta S, Sahajwalla V. Technical note 16, CCSD Publication, Qld., Australia, 2005.
45. Yagi JI. In: Science and technology of innovative ironmaking for aiming at energy half consumption, Tokyo, Japan, vol. 251, 2003.
46. Birat JP, Hanort F, Danloy G. In: Third international conference on science and technology of ironmaking (ICSTI), Düsseldorf, 2003. p. 588.
47. Ishii K., and Yagi J. Tetsu-to-Hagane 87 (2001) 207-220
48. Naito M, Nakano M, Nomura S. In: Third ICSTI international conference on science and technology of ironmaking, Düsseldorf, Steel Institute, VDEh, 2003. p. 539.
49. Nomura S., Ayukawa H., Kitaguchi H., Tahara T., Matsuzaki S., Naito, et al. ISIJ Int 45 (2005) 316
50. Nomura S., Matsuzaki S., Naito M., Ayukawa H., Koizumi S., Ogata Y., et al. AISTech (2006)
51. Sahajwalla V, McCarthy F, Cham ST, et al. International blast furnace lower zone symposium, Wollongong, Australia, 2002.
52. McCarthy F., Sahajwalla V., Hart J., et al. Metall Mater Trans 34B (2003) 573
53. Wu C., and Sahajwalla V. Metall Mater Trans 31B 2 (2000) 243
54. Wu C., and Sahajwalla V. Metall Mater Trans 31B (2000) 215
55. Iwase M. In: Proceedings of 54th committee of ironmaking of Japan society for promotion of science and technology, Tokyo, 2003.
56. Orimoto T, Nishimura T, Matsuzaki S, Naito M. In: Proceedings of 54th committee of ironmaking of JSPS technology, 2003.
57. Shimizu M, Nishioka K. In: Proceedings of 54th committee of ironmaking of JSPS, Japan, 2003.
58. Kang T.W., Gupta S., Sahajwalla V., and Saha-Chaudhury N. ISIJ Int 45 11 (2005) 1526
59. Mehta A.S., and Sahajwalla V. ISIJ Int 43 10 (2003) 1512
60. Benson S.A., Jones M.L., and Harb J.N. In: Smoot L.D. (Ed). Fundamentals of coal combustion (1993), Elsevier Publishers, Amsterdam
61. Essenhigh R.H. In: Elliott M.A. (Ed). Fundamentals of coal combustion (1981), Wiley-Interscience, New York 1153
62. Wibberley L.J., and Wall T.F. Fuel 61 (1982) 93
63. Walker P.L.J., Verma S.K., Rivera-Utrilla J., and Khan M.R. Fuel 67 (1988) 719
64. Raask E. Mineral impurities in coal combustion (1985), Hemisphere Publishing, USA
65. Boni AA, Beer JM, Bryers RW, Flagan RG, Helble JJ, Huffman GP, et al. US DOE report no. DE-AC22-86PC90751, 1990.
66. Helble J.J., Srinivasachar S., and Boni A.A. Prog Energy Combust Sci 16 4 (1990) 267
67. Srinivasachar S., Helble J.J., and Boni A.A. Prog Energy Combust Sci 16 4 (1990) 281
68. Vassilev S.S., Kitano K., Takeda S., and Tsure T. Fuel Process Technol 45 (1995) 27
69. Bryers R.W. Prog Energy Combust Sci 22 (1996) 29
70. Vassileva C.G., and Vassilev S.V. Fuel Process Technol 86 12-13 (2005) 1297
71. Huffman GP, Huggins FE. Mineral matter and ash in coal. In: Vorres KS, editor. ACS symposium series 301, American Chemical Society, USA, 1986. p. 110.
72. Biggs DL, Lindsay CG. Mineral matter and ash in coal. In: Vorres KS, editor. ACS Symposium series 301, American Chemical Society, USA, 1986. p. 128.
73. Kerkkonen O. Cokemaking Int 34 (1997)
74. Reifenstein A.P., Kahraman H., Coin C.D.A., Calos N.J., Miller G., and Unwins P. Fuel 78 (1999) 1449
75. Sakurovs R, Creelman R, Pohl J, Juniper L. ACARP report C10059, Australia, 2001. p. 136.
76. Mahoney M, Rogers H, Andriopoulos N, Gupta R. ACARP report C9059, Australia, 2002.
77. Andriopolous N, Dukino R, Sakurovs R. ACARP report C9060, 2002. p. 96.
78. Kerkkonen O, Arendt P, Kuhl H. In: 61st ironmaking conference proceedings, Nashville, ISS Warrendale, USA, 2002. p. 393.
79. Osborne J, Mahoney M, Simento N, Riley D. Technical report-project 5.16, CRC for Black Coal Utilisation, Australia, 2002.
80. Vallova S., Slovak, and Lesko J. J Therm Anal Calorimetry 71 3 (2003) 875
81. Sakurovs R, Sahajwalla V, Cham ST, Grigore M. In: Second China international coking technology and coke market congress, Beijing. 2004. p. 192.
82. Sakurovs R, French D. CCSD report ET IR/679, Australia, 2005. p. 42.
83. Lu W-K, Saman G, Uribe M. In: Ironmaking conference proceedings, vol. 40, 1981. p. 57.
84. Harris DJ, Smith IW. In: 197th ACS national meeting, USA, vol. 34, 1989. p. 99.
85. Harris D.J., and Young D.J. Ironmaking Steelmaking 16 (1989) 399
86. Gupta S, Dubikova M, Sahajwalla V, Best MH, Chaubal P, Youmans T. In: Proceedings of AISTech06, May 1-6, Cleaveland, Warrendale USA, 2006. p. 19-30.
87. Kimura T. Fuel Process Technol 56 (1998) 1
88. Ward C., and French D. Fuel 85 16 (2006) 2268
89. Brownell W.E. Structural clay products (1976), Springer, Berlin p. 126-162
90. Grim R.E., and Bradely W.F. Am Miner 33 (1948) 50
91. Grim R.E. Applied clay mineralogy (1962), McGraw-Hill, New York p. 422
92. Gornostayev S., and Härkki J. Fuel 85 (2006) 1047
93. Mitchell R.S., and Gluskoter H.J. Fuel 55 (1976) 90
94. Fortin F., and Rouzaud J.N. Fuel 73 (1994) 795
95. Marsh H. In: ISS proceedings, Pittsburgh, Warrendale USA, vol. 41, 1982. p. 2.
96. Gray RJ, Champagne PE. In: Ironmaking conference proceedings, vol. 47, 1988. p. 313.
97. Vandezande JA. In: 41st Ironmaking conference proceedings, ISS Warrendale, USA, 1982. p. 12.
98. Mitchell GD, Benedict LG. In: Ironmaking conference proceedings, vol. 42, 1983. p. 347.
99. Lindert M, Timmer RMC. In: Ironmaking conference proceedings, vol. 50, 1991.p. 233.
100. Tomita A. Catalysis Surveys from Japan, vol. 5, 2001. p. 17.
101. Grigore M., Sakurovs R., French D., and Sahajwalla V. ISIJ Int 46 4 (2006) 503
102. Grigore M, French D, Sakurovs R, Gupta S, Sahajwalla V. In: First Australia-China-Japan symposium on iron and steelmaking, Shenyang, 24-26 September. China: Liaoning Science & Technology Publishing; 2006. p. 66-74.
103. Walker PLJ, Shelef M, Anderson RA. In: Jr., PLW., editors. Catalysis of carbon gasification, vol. 4. New York: Marcel Dekker Inc.; 1968. p. 287.
104. Turkdogan E.T., and Vinters J.V. Carbon 10 (1972) 97
105. Vandezande JA. In: 44th ironmaking conference proceedings, ISS Warrendale, USA, 1985. p. 189.
106. Nightingale R.J., Dippenaar R.J., and Lu W.-K. Metall Mater Trans 31B (2000) 993
107. Olsson R.G., Koump V., and Perzak T.F. Trans Metall Soc AIME 236 (1966) 426
108. Kosaka M., and Minowa S. Trans ISIJ 8 (1968) 392
109. Grigoryan V.A., and Karshin V.P. Russ Metall 1 (1972) 57
110. Ericsson S.O., and Mellberg P.O. Scand J Metall 10 1 (1981) 15
111. Shigeno Y., Tokuda M., and Ohtani M. Trans Japan Inst Metals 26 1 (1985) 33
112. Orsten S, Oeters F. In: Proceedings of the sixth process technology conference, Philadelphia, ISS, USA, 1986.
113. Orsten S, Oeters F. In W.O. Philbrook, Memorial Symposium Proceedigs, Toronto, ISS, Canada, 1988.
114. Wright J.K., and Baldock B.R. Metall Trans 19B (1988) 375
115. Gudenau H.W., Mulanza J.P., and Sharma G.R. Steel Res 61 3 (1990) 97
116. Gudenau HW. In: First international congress of science & technology of ironmaking, Sendai, Japan, 1994. p. 348.
117. Sun H., Mori K., Sahajwalla V., and Pehlke R.D. J High Temp Mater Process 17 4 (1998) 257
118. Wu C., Wiblen R., and Sahajwalla V. Metall Mater Trans 31B (2000) 1099
119. Cham S.T., Sahajwalla V., Sakurovs R., Sun H., and Dubikova M. ISIJ Int 44 (2004) 1835
120. Sun H. ISIJ Int 10 (2005) 1482
121. Mourao M.B., Murthy G.G.K., and Elliott J.F. Metall Trans 24B (1993) 629
122. Peters M, et al. In: Second European ironmaking congress, London Institute of Metals, Glasgow, 1991.
123. Cham S.T., Sakurovs R., Sun H., and Sahajwalla V. ISIJ Int 46 5 (2006) 652
124. Bale CW, Pelton AD, Thompson WT. FactSage, 5.3, Ecole Polytechnique, Montreal, 2001.
125. Mills K.C., and Sridhar S. Ironmaking Steelmaking 26 (1999) 262
126. Bafghi M.S., Fukuda M., Ito Y., Yamada S., and Sano M. ISIJ Int 33 (1993) 1125
127. Hong L., Hirasawa M., Yamada S., and Sano M. ISIJ Int 36 (1996) 1237
128. Mori K., and Sun H. J Jpn Foundry Eng Soc 69 (1997) 329
129. Kasai A., Kiguchi J., Kamijo T., and Shimizu M. Tetsu-to-Hagane 84 (1998) 697
130. Seo K., and Fruehan R.J. ISIJ Int 40 (2000) 7
131. Mroz J. Metall Mater Trans 32B (2001) 821
132. Teasdale S.L., and Hayes P.C. ISIJ Int 45 5 (2005) 634
133. Sun H., and Chew S.J. ISIJ Int 46 7 (2006) 1108
134. Sun H, Easman W, Sahajwalla V. In: Proceedings of Asia steel international conference, Fukuoka, Japan, 2006. p. 350.
135. Sun H. In: Proceedings of Asia steel international conference, Fukuoka, Japan, 2006. p. 356.
136. Teasdale S.L., and Hayes P.C. ISIJ Int 45 5 (2005) 642
137. Sarma B., Cramb A.W., and Fruehan R.J. Metall Mater Trans 27B (1996) 717
138. Story S., Sarma B., Fruehan R.J., Cramb A.W., and Belton G. Metall Mater Trans 29B (1998) 929
139. Ji F.-Z., Sichen D., and Seetharaman S. Int J Thermophys 20 (1999) 309
140. Jouhari A.K., Galgali R.K., Datta P., Bhattacharjee S., Gupta R.C., and Ray H.S. Ironmaking Steelmaking 27 (2000) 27
141. Dahlstedt A, Hallin M, Tottie M. SCANMET I, Luleå, Sweden, 1999. p. 235.
142. Dahlstedt A, Hallin M, Wikström J-O. In: Proceedings of the fourth European coke and ironmaking congress, vol. 1, 2001. p. 138.
143. Hooey L, Sterneland J, Hallin M. In: 60th ironmaking conference proceedings, Baltimore, ISS Warrendale, USA, 2001. p. 197.
144. LKAB Experimental Blast Furnace (EBF)-a tool for international research, MEFOS Newsletter, April 2004.
145. Sterneland J, Hallin M. In: Sixth Japan-Nordic countries joint symposium in Nagoya, Japan, 29-30 November 2000.
146. Tranell G, Hagelien T, Kolbeinsen L, Dahlstedt A, Hallin M. In: 2000 Ironmaking conference proceedings, 2000. p. 125.
147. Willmers RR, Monson JR, Wilkinson HC. Commission of the European communities report EUR 8703, 1984.
148. Grosspietsch KH, Lungen HB, Dauwels G, Ferst I, Karjalahti T, Negro P, et al. In: Proceedings of fourth European coke and ironmaking congress, Paris, vol. 1, 2000. p. 1.
149. Diez M.A., Alvarez R., and Barriocanal C. Intl J Coal Geol 50 (2002) 389
150. Todoschuk TW, Price JP, Gransden JF. Iron & Steel Technology, USA, vol. 3, 2004. p. 73.
151. Willmers RR, Bennington CR. In: Second international cokemaking congress, London, UK, 1992. p. 260.
152. Helleisen M, Nicolle R, Steiler JM, Jusseau N, Meltzheim C, Thiriom C. In: First international cokemaking congress, Essen, Germany, 1987. p. C2.1.
153. Tucker J, Goleczka J. In: First international cokemaking congress, Essen, 1987. p. C5.1.
154. Chan B.K.C., Thomas K.M., and Marsh H. Carbon 31 (1993) 1071
155. Arendt P., Huhn F., and Kühl H. Cokemaking Int 2 (2001) 50
156. Hilding T., Gupta S., Sahajwalla V., Bjorkman B., and Wikstrom J.O. ISIJ Int 45 7 (2005) 1041
157. Dubrawaski J.V., and Gill W.W. Ironmaking Steelmaking 1 (1984) 7
158. Negro P, Steiler JM, Beppler E, Jahusen U, Bennington CR, Willmers RR. In: Proceedings of third European ironmaking congress, CRM-VDEh, Gent, Belgium, vol. 20, 1996. p. 13.
159. Lu L., Sahajwalla V., Kong C., and Harris D. Carbon 39 (2001) 1821
160. Kashiwaya Y., and Ishii K. ISIJ Int 31 (1991) 440
161. Kawakami M., Kamba H., Takenaka T., Gupta S., Chandratilleke R., and Sahajwalla V. ISIJ Int (2006)
162. Takahata M, Ishii K, Kashiwaya Y, Sasaki Y. In: 57th ironmaking conference proceeding, Warrendale, Iron & Steel Society, USA, 1998. p. 749.
163. Wang W., Thomas K.M., Poultney R.M., and Wilmers R.R. Carbon 33 (1995) 1525
164. Brenda K.C., Chan K., Thomas M., and Marsh H. Carbon 31 (1993) 1071
165. Feng B., Bhatia S.K., and Barry J.C. Carbon 40 (2002) 481
166. Agarwal JC, Brown FC, Chin DL, Stevens GS, Smith DM. ISS technical conference 1997, Charlotte, USA.
167. Babich A., Gudenau H.W., Mavrommatis K.T., Froehling C., et al. Rev Metal Madrid 38 (2002) 288
168. Hartig W, Langner K, Lüngen HB, Stricker KP. Iron and Steelmaker, 2000. Aug 29.
169. Loison R., and Foch Pand Boyer A. Coke quality and production (1989), Butterworths, London p. 83
170. Sakurovs R. Fuel 79 (2000) 379
171. Emmerich F.G., and Luengo C.A. Fuel 73 (1994) 1235
172. Nomura S., Kato K., Nakagawa T., and Komaki I. Fuel 82 (2003) 1775
173. Carpenter A.M. Use of PCI in blast furnaces (2006), IEA Clean Coal Centre, London p. 21