Interventions to historic masonries: Investigation of the bond mechanism between stones or bricks and grouts

Materials and Structures/Materiaux et Constructions

Volumn 41, Issue 2, 2008, Pages 255-267

  Adami, Chryssi Elpida ^a   Vintzileou, Elizabeth ^a  

^a NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

Bond mechanism; Direct tension; Interfacial transition zone; Shear; Tripartite grouts

Indexed keywords

BOND STRENGTH (MATERIALS); BRICK; CEMENTS; COMPOSITE MATERIALS; GROUTING; LIMESTONE; SHEAR STRENGTH;

BOND MECHANISMS; COMPOSITE GROUTS; DIRECT TENSION; INTERFACIAL TRANSITION ZONES; STONES; TRIPARTITE GROUTS;

MASONRY CONSTRUCTION;

EID: 38749105091     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/s11527-007-9235-z     Document Type: Article

References (32)

1. Binda L, Baronio G, Tiraboschi C (1993) Repair of brick masonries by injection of grouts: experimental research. J Struct Eng 20(1):29-44
2. Laefer D, Baronio G, Anzani A, Binda L (1996) Measurement of grout efficacy for stone masonry walls. Proc 7th NAMC, Indiana, USA, 484-496
3. Vintzileou E, Tassios TP (1995) Three-leaf stone masonry strengthened by injecting cement grouts. J Struct Eng ASCE 121(5):848-856
4. Toumbakari E-E (2002) Lime-pozzolan-cement grouts and their structural effects on composite masonry walls. Doctor Thesis, Katholieke Univ. Leuven
5. Valuzzi M-R (2004) Consolidamento e recupero delle murature, Coolana Scientifica 'REFICERE', 96
6. Vintzileou E, Miltiadou-Fezans A, Vrouva A, Anagnostopoulou S (2006) Mechanical properties of three-leaf stone masonry. In: Lourenço PB, Roca P, Modena C, Agrawal S (eds) Proc 5th Struct Analysis of Historical Constructions, New Delhi, 2006, 777-784
7. Miltiadou-Fezans A, Vintzileou E, Papadopoulou E, Kalagri A (2006) Mechanical properties of three-leaf stone masonry after grouting. In: Lourenço PB, Roca P, Modena C, Agrawal S (eds) Proc 5th Struct Analysis of Historical Constructions, New Delhi, 2006, 785-792
8. Farran J (1956) Contribution minéralogique à l'étude de l'adhérence entre les constituants hydratés des ciments et les matériaux enrobés. Revue des Matériaux de Construction et Travaux Publics 490-491:155-172
9. Lyubimova TYu, Pinus ER (1962) Crystallization structure in the contact zone between aggregate and cement in concrete. Colloid J USSR 24(5):491-498
10. Maso JC (1980) The bond between aggregates and hydrated cement pastes. Proc 7th Int Cong on the Chem of Cement, Paris, (Septima Editions) 3-15
11. Xiong G, Liu J, Li G, Xie H (2002) A way for improving interfacial transition zone between concrete substrate and repair materials. Cem Concr Res 32(12):1877-1881
12. Lange D, Deford HD, Werner AM (1999) Microstructural investigation of mortar/unit interaction. J Masonry Soc 17(1):31-42
13. Reda Taha MM, Shrive NG (2001) The use of pozzolans to improve bond and bond strength. Proc 9th Canadian Masonry Symposium, Canada
14. Ray I, Davalos J, Luo S (2005) Interface evaluations of overlay-concrete bi-layer composites by a direct shear test method. Cem Concr Composites 27(3):339-347
15. Momayez A, Ehsani MR, Ramezanianpour AA, Rajaie H (2005) Comparison of methods for evaluating bond strength between concrete substrate and repair materials. Cem Concr Res. 35(4):748-757
16. Minoru K, Toshiro K, Yuichi U, Keitetsu R (2001) Evaluation of bond properties in concrete repair materials. J Mat Civil Eng 13(2):98-105
17. Rao G, Prasad BK (2002) Influence of the roughness of aggregate surface on the interface bond strength. Cem Concr Res 32(2):253-257
18. Jiang L (1999) The interfacial zone and bond strength between aggregates and cement pastes incorporating high volumes fly ash. Cem Concr Composites 21(4):313-316
19. Groot C (1993) Effects of water on mortar-brick bond. Thesis, Technical University Delft
20. Grandet J, Farran J, Maso JC (1970) Variations des concentrations de portlandite et d'ettringite dans les pâtes de ciment Portland au contact des terres cuites poreuses. Comptes Rendus, Acad.Sc.Paris, serie D, 4-7
21. Bei G, Papayianni I (2004) Experimental study of shear bond strength of traditional masonry. 13th Int Brick and Block Masonry Conf, Amsterdam, 181-190
22. Miltiadou A (1990) Etude des coulis hydrauliques pour la réparation et le renforcement des structures et des monuments historiques en maçonnerie. Doctor Thesis, Ecole Nationale des Ponts et Chaussées, Paris
23. Papayianni I (1998) A diachronic principle in construction: the use of mixed type binders-Durability aspects. In: Swamy RN (ed) Proc JCCabrera Symp.Durability of Building Materials, Bangkok, 115-129
24. Vardoulakis I, Kourkoulis SK (1997) Mechanical properties of Dionysos marble. Final Report of the Environment Project EV5V-CT93-0300 Monuments under seismic action (Nat. Tech. Univ. of Athens)
25. Vardoulakis I, Stavropoulou M, Papadopoulos Ch. (2000) Direct tension tests on Dionysos marble. EU DG XII SMT Programme No SMT4-CT96-2130, Final Report
26. Ambroise J, Maximilien S, Pera J (1994) Properties of metakaolin blended cements. Adv Cem Based Materials 1(4):161-168
27. Tassios TP, Vachliotis C, Spanos C (1989) In-situ strength measurement of masonry mortars. Int Technical Conf in Structural Conservation of Stone Masonry, Athens, (ICCROM, 1989)
28. Toumbakari E-E, Adami Ch.-E, Vintzileou E (2005) Properties and performance of tripartite lime-natural pozzolan-cement based grouts with the use of artificial pozzolans. Proc 1st Hellenic Conf the Utilization of By-Products in Constructions, Thessaloniki, November, 141-150 (in Greek)
29. Li G (2003) A new way to increase the long-term bond strength of new-to-old concrete by the use of fly ash. Cem Concr Res 33(6):799-806
30. Lawrence S, Cao TH (1987) An experimental study of the interface between clay and cement. Proc 4th North American masonry Conf, Los Angeles, 1-14
31. Hendry AW (1998) Structural masonry, 2nd edn. Macmillan Pub Ltd
32. Tassios TP, Vintzileou E (1987) Concrete to concrete friction. J Struct Eng ASCE 113(4):832-849