Volume shrinkages and mechanical properties of various fiber-reinforced hydroxyethyl methacrylate-polyurethane/unsaturated polyester composites

Composites Science and Technology

Volumn 68, Issue 3-4, 2008, Pages 709-717

  Lin, S P ^a   Shen, J H ^a   Han, J L ^b   Lee, Y J ^a   Liao, K H ^a   Yeh, J T ^c   Chang, F C ^d   Hsieh, K H ^a  

^a NATIONAL TAIWAN UNIVERSITY   (Taiwan)

^b NATIONAL ILAN UNIVERSITY   (Taiwan)

^c NANYA INSTITUTE OF TECHNOLOGY   (Taiwan)

^d NATIONAL CHIAO TUNG UNIVERSITY   (Taiwan)

Author keywords

A. Fibres; A. Polymer matrix composites (PMCs); B. Infrared (IR) spectroscopy; B. Mechanical properties

Indexed keywords

CROSSLINKING; FIBER REINFORCED MATERIALS; POLYURETHANES; SHRINKAGE; STYRENE; SYNTHESIS (CHEMICAL); TENSILE STRENGTH; UNSATURATED POLYMERS;

BULLETPROOF TESTING; HYDROXYETHYL METHACRYLATE; VOLUME SHRINKAGE MODIFIERS;

POLYMER MATRIX COMPOSITES;

ARAMID FIBER; FIBER REINFORCED COMPOSITE; GLASS FIBER; MATRIX; MECHANICAL PROPERTY; MORPHOLOGY; POLYESTER; POLYURETHANE; SCANNING ELECTRON MICROSCOPY; SHRINKAGE; STRENGTH; TENSILE PROPERTY; TESTING;

EID: 38649096326     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2007.09.017     Document Type: Article

References (24)

1. Lee D.S., and Han C.D. Effect of the chemical structure of low-profile additives on the curing behavior and chemorheology of unsaturated polyester resin. Poly Eng Sci 27 13 (1987) 964-975
2. Lam P.W.K. A comparative study of structure-property relationships in low-profile polyester matrices. Poly Eng Sci 29 10 (1989) 690-698
3. Yang Y.S., and Suspene L. Curing unsaturated polyester resins: viscosity studies and simulations in pre-gel state. Poly Eng Sci 31 5 (1991) 321-332
4. Cao X., and Lee L.J. Control of shrinkage and residual styrene of unsaturated polyester resins cured at low temperatures: I. effect of curing agents. Polymer 44 6 (2003) 1893-1902
5. Cao X., and Lee L.J. Control volume shrinkage and residual styrene of unsaturated polyester resins cured at low temperatures: II. Effect of comonomer. Polymer 44 5 (2003) 1507-1516
6. Li W., and Lee L.J. Shrinkage control of low-profile unsaturated polyester resins cured at low temperature. Polymer 39 23 (1998) 5677-5687
7. Li W., and Lee L.J. Low temperature cure of unsaturated polyester resins with thermoplastic additives I. dilatometry and morphology study. Polymer 41 2 (2000) 685-696
8. Li W., and Lee L.J. Low temperature cure of unsaturated polyester resins with thermoplastic additives II. Structure formation and shrinkage control mechanism. Polymer 41 2 (2000) 697-710
9. Li W., and Lee L.J. Low temperature cure of unsaturated polyester resins with thermoplastic additives III. Modification of polyvinyl acetate for better shrinkage control. Polymer 41 2 (2000) 711-717
10. Huang Y.J., and Su C.C. Effects of poly(vinyl acetate) and poly(methyl methacrylate) low-profile additives on the curing of unsaturated polyester resins II. Morphological changes during cure. J Appl Polym Sci 55 2 (1995) 323-342
11. Huang Y.J., and Liang C.M. Volume shrinkage characteristics in the cure of low-shrink unsaturated polyester resins. Polymer 37 3 (1996) 401-412
12. Huang Y.J., and Horng J.C. Effects of thermoplastic additives on mechanical properties and glass transition temperatures for styrene-crosslinked low-shrink polyester matrices. Polymer 39 16 (1998) 3683-3695
13. Zhang Z., and Zhu S. Microvoids in unsaturated polyester resins containing poly(vinyl acetate) and composites with calcium carbonate and glass fibers. Polymer 41 10 (2000) 3861-3870
14. Lin J.M., Ma C.C.M., Tai N.H., Chang W.C., and Tsai C.C. Carbon fiber reinforced phenolic resin/silica ceramer composites-processing, mechanical and thermal properties. Polym Compos 21 2 (2000) 305-311
15. Hung A.Y., Wang F.Y., Yeh S.R., Chen W.J., and Ma C.C.M. Carbon/ carbon composites derived from poly(ethylene oxide)-modified novolac-type phenolic resin: microstructure and physical, and morphological properties. J Appl Polym Sci 84 8 (2002) 1609-1619
16. Wu H.D., Ma C.C.M., and Lin J.M. Processability and properties of phenoxy resin toughened phenolic resin composites. J Appl Polym Sci 63 7 (1997) 911-917
17. Ma C.C.M., Lee C.T., and Wu H.D. Mechanical properties, thermal stability, and flame retardance of pultruded fiber-reinforced poly(ethylene oxide)-toughened novolak-type phenolic resin. J Appl Polym Sci 69 6 (1998) 1129-1136
18. Ma C.C.M., Tseng H.T., and Wu H.D. Blocked diisocyanate polyester-toughened novolak-type phenolic resin:synthesis, characterization, and properties of composites. J Appl Polym Sci 69 6 (1998) 1119-1127
19. Wang F.Y., Ma C.C.M., and Wu W.J. Mechanical properties, morphology, and flame retardance of glass fiber-reinforced polyamide-toughened novolac-type phenolic resin. J Appl Polym Sci 73 6 (1999) 881-887
20. Arnold J.J., Zamora M.P., and Brennan A.B. Characterization of UHMWPE fiber/matrix adhesion by dynamic mechanical spectrometry. Polym Compos 17 3 (1996) 332-342
21. Pegoretti A., Ashkar M., Migliaresi C., and Marom G. Relaxation processes in polyethylene fiber-reinforced polyethylene composites. Compos Sci Technol 60 8 (2000) 1181-1189
22. Cherian A.B., and Thachil E.T. Block copolymers of unsaturated polyesters and functional elastomers. J Appl Polym Sci 94 5 (2004) 1956-1964
23. Lin S.P., Han J.L., Yeh J.T., Chang F.C., and Hsieh K.H. Surface modification and physical properties of various UHMWPE-fiber-reinforced modified epoxy composites. J Appl Polym Sci 104 1 (2006) 655-665
24. Lin S.P., Han J.L., Yeh J.T., Chang F.C., and Hsieh K.H. Composites of UHMWPE fiber reinforced PU/epoxy grafted interpenetrating polymer networks. Eur Polym J 43 3 (2007) 996-1008