Wettability of carbon fibers modified by acrylic acid and interface properties of carbon fiber/epoxy

European Polymer Journal

Volumn 44, Issue 2, 2008, Pages 494-503

  Xu, Zhiwei ^a   Chen, Li ^a   Huang, Yudong ^b   Li, Jialu ^a   Wu, Xiaoqing ^a   Li, Xueming ^a   Jiao, Yanan ^a  

^a TIANJIN POLYTECHNIC UNIVERSITY   (China)

^b HARBIN INSTITUTE OF TECHNOLOGY   (China)

Author keywords

Carbon fibers; Composites; Interface adhesion; Pre irradiation; Wettability

Indexed keywords

ADHESION; ADSORPTION; COMPOSITE MATERIALS; FUNCTIONAL GROUPS; INTERFACIAL ENERGY; OXIDATION; TENSILE STRENGTH; TOPOGRAPHY; WETTING;

ACRYLIC ACID; INTERFACE ADHESION; PRE-IRRADIATION; SURFACE CHEMICAL COMPOSITION;

CARBON FIBERS;

EID: 38549162243     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2007.11.021     Document Type: Article

References (39)

1. Fukunaga A., Komami T., Ueda S., and Nagumo M. Plasma treatment of pitch-based ultra high modulus carbon fibers. Carbon 37 (1999) 1087-1092
2. Kettle A.P., Beck A.J., Toole L.O., and Jones F.R. Plasma polymerisation for molecular engineering of carbon-fibre surfaces for optimised composites. Compos Sci Tech 57 (1997) 1023-1030
3. Park S.J., and Kim B.J. Roles of acidic functional groups of carbon fiber ssurfaces in enhancing interfacial adhesion behavior. Mater Sci Eng A 408 (2005) 269-274
4. Lin S.P., Han J.L., Yeh J.T., Chang F.C., and Hsieh K.H. Composites of UHMWPE fiber reinforced PU/epoxy grafted interpenetrating polymer networks. Eur Polym J 43 (2007) 996-1008
5. Dvir H., Jopp J., and Gottlieb M. Estimation of polymer-surface interfacial interaction strength by a contact AFM technique. J Colliod Interface Sci 304 (2006) 58-64
6. Montes-Moran M.A., Martinez-Alonso A., and Tascon J.M. Effects of plasma oxidation on the surface and interfacial properties of ultra-high modulus carbon fibres. Compos Part A 32 (2001) 361-366
7. Boudou J.P., Paredes J.I., Cuesta A., and Martinez-Alonso A. Oxygen plasma modification of pitch-based isotropic carbon fibres. Carbon 41 (2003) 41-48
8. Fukunaga A., and Ueda S. Anodic surface oxidation for pitch-based carbon fibers and the interfacial bond strengths in epoxy matrices. Compos Sci Tech 60 (2000) 249-259
9. Cao H., Huang Y., Zhang Z., and Sun J. Uniform modification of carbon fibers surface in 3-D fabrics using intermittent electrochemical treatment. Compos Sci Tech 65 (2005) 1655-1667
10. Severini F., Formaro L., Pegoraro M., and Posca L. Chemical modification of carbon fiber surfaces. Carbon 40 (2002) 735-743
11. Xu Z., Huang Y., Zhang C., and Chen G. Influence of rare earth treatment on interfacial properties of carbon fiber/epoxy composites. Mater Sci Eng A 444 (2007) 170-177
12. Pamula E., and Rouxhet P.G. Bulk and surface chemical functionalities of type III PAN-based carbon fibres. Carbon 41 (2003) 1905-1913
13. Wang S., Chen Z.H., Ma W.J., and Ma Q.S. Influence of heat treatment on physical-chemical properties of PAN-based carbon fiber. Ceram Int 32 (2006) 291-299
14. 2). Appl Surf Sci 171 (2001) 136-143
15. Dann Y.F., Chen Y.C., Shen J.T., and Lin Y.H. Thermal induced graft polymerization using peroxide onto polypropylene fiber. Polymer 45 (2004) 6839-6846
16. El-Sawy Naeem.M., and Sagheer F.A. Radiation-induced graft polymerization of acrylic acid onto poly(tetrafluoroethylene-perfluorovinyl ether) copolymer films: complexation with some transition metals and biological activity. Eur Polym J 37 (2001) 161-166
17. Ringrose B.J., and Kronfli E. Preirradiation grafting of ethylene vinyl acetate copolymer resins. Radiat Phys Chem 55 (1999) 451-459
18. Sahoo A., Ramasubramani K.R.T., Jassal Manjeet., and Agrawal A.K. Effect of copolymer architecture on the response of pH sensitive fibers based on acrylonitrile and acrylic acid. Eur Polym J 43 (2007) 1065-1076
19. Kondo Y., Miyazaki K., Yamaguchi Y., Sasaki T., Irie S., and Sakurai K. Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers. Eur Polym J 42 (2006) 1008-1014
20. Alberti A., Bertini S., Gastaldi G., and Iannaccone N. Electron beam irradiated textile cellulose fibres ESR studies and derivatisation with glycidyl methacrylate(GMA). Eur Polym J 41 (2005) 1787-1798
21. Zhang C.H., Huang Y.D., and Zhao Y.D. Surface analysis of γ-ray irradiation modified PBO fiber. Mater Chem Phys 92 (2005) 245-252
22. Giovedi C., Brocardo Machado L.D., Augesto M., and Pino E.S. Evaluation of the mechanical properties of carbon fiber after electron beam irradiation. Nucl Instrum Meth Phys Res B 236 (2005) 526-533
23. Pandey P.K., Srivastava A., Tripathy J., and Behari K. Graft copolymerization of acrylic acid onto guar gum initiated by vanadium (V)-mercaptosuccinic acid redox pair. Carbohyd Polym 65 (2006) 414-426
24. 8 as catalysts under thermal treatment. Eur Polym J 36 (2000) 2505-2510
25. Ren C.S., Wang D.Z., and Wang Y.N. Graft co-polymerization of acrylic acid onto the linen surface induced by DBD in air. Surf Coat Tech 201 (2006) 2867-2874
26. Nasef M.M., and Hegazi S.A. Preparation and applications of ion exchange membranes by radiation-induced graft copolymerization of polar monomers onto non-polar films. Prog Polym Sci 29 (2004) 499-506
27. Zhang H., Zhang Z., and Breidt C. Comparison of short carbon fibre surface treatments on epoxy composites: I. Enhancement of the mechanical properties. Compos Sci Tech 64 (2004) 2021-2028
28. Huang Y.D., Qiu J.H., and Liu L.X. The uniform treatment of carbon fiber surface in three-directional orthogonal fabric by oxygen-plasma. J Mater Sci 38 (2003) 759-765
29. Li J., Huang Y., Xu Z., and Wang Z. High-energy radiation technique treat on the surface of carbon fiber. Mater Chem Phys 94 (2005) 315-324
30. Owens D.K., and Wendt R.C. Estimation of the surface free energy of polymers. J Appl Polym Sci 13 (1969) 1741-1748
31. Kaelble D.H. Dispersion-polar surface tension properties of organic solids. J Adhes 2 (1970) 66-70
32. Ganan P., Garbizu S., and Liano-Ponte R. Surface modification of sisal fibers: effects on the mechanical and thermal properties of their epoxy composites. Polym Compos 26 (2005) 121-126
33. Patel K.J., Amin K.G., and Patel R.G. Glass fiber-reinforced composites of diglycidyl ether of 2,7-dihydroxy naphthalene. J Appl Polym Sci 75 (2000) 1345-1356
34. Viswanathan H., Wang Y.Q., Audi A.A., and Allen P.J. X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 24. Interfacial interactions between polyimide resin and electrochemically oxidized PAN-based carbon fibers. Chem Mater 13 (2001) 1647-1656
35. Lakshminarayanan P.V., and Toghiani H. Nitric acid oxidation of vapor grown carbon nanofibers. Carbon 42 (2004) 2433-2440
36. Mader E., and Freitag K.H. Interface properties and their influence on short fibre composites. Composites 21 (1990) 397-402
37. Park J.M. Interfacial properties of two-carbon fiber reinforced polycarbonate composites using two-synthesized graft copolymers as coupling agents. J Colloid Interface Sci 225 (2000) 384-393
38. Huang Y.D., Liu L., Qiu J.H., and Shao L. Influence of ultrasonic treatment on the characteristics of epoxy resin and the interfacial property of its carbon fiber composites. Compos Sci Tech 62 (2002) 2153-2158
39. Kalantar J., and Drzal L.T. The bonding mechanism of aramid fibres to epoxy matrices. J Mater Sci 25 (1990) 4186-4190