Hardness and elastic modulus of TiO2 anodic films measured by instrumented indentation

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 84, Issue 2, 2008, Pages 524-530

  Soares, Paulo ^a,b   Mikowski, Alexandre ^b   Lepienski, Carlos M ^b   Santos Jr , Emanuel ^c   Soares, Glória A ^c   Swinka Filho, Vitoldo ^b   Kuromoto, Neide K ^b  

^a PONTIFICAL CATHOLIC UNIVERSITY OF PARANÁ   (Brazil)

^b FEDERAL UNIVERSITY OF PARANÁ   (Brazil)

^c FEDERAL UNIVERSITY OF RIO DE JANEIRO   (Brazil)

Author keywords

Anodic oxidation; Elastic modulus; Hardness; Instrumented indentation; TiO2 films

Indexed keywords

ANODIC OXIDATION; CURRENT DENSITY; ELASTIC MODULI; HARDNESS; INDENTATION; MORPHOLOGY; PHOSPHORIC ACID; RAMAN SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY;

ANALYTICAL MODELS; ANODIC FILMS; INSTRUMENTED INDENTATION;

TITANIUM DIOXIDE;

ELECTROLYTE; OXIDE; PHOSPHORIC ACID; TITANIUM DIOXIDE;

ANALYTIC METHOD; ARTICLE; BIOMECHANICS; FILM; HARDNESS; MEASUREMENT; MORPHOLOGY; OXIDATION; POROSITY; RAMAN SPECTROMETRY; SCANNING ELECTRON MICROSCOPY; THICKNESS; YOUNG MODULUS;

COATED MATERIALS, BIOCOMPATIBLE; ELASTICITY; ELECTRODES; HARDNESS; HARDNESS TESTS; MATERIALS TESTING; OXIDATION-REDUCTION; SURFACE PROPERTIES; TITANIUM;

EID: 38349189809     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.30900     Document Type: Article

References (40)

1. Bränemark PI. Osseointegration and its experimental background. J Prosthet Dent 1983;50:399-410.
2. Li LH, Kong YM, Kim HW, Kim YW, Kim HE, Heo SJ, Koak JY. Improved biological performance of Ti implants due to surface modification by micro-arc oxidation. Biomaterials 2004;25:2867-2875.
3. Sul YT, Johansson CB, Jeong Y, Albrektsson T. The electrochemical oxide growth behaviour on titanium in acid and alkaline electrolytes. Med Eng Phys 2001;23:329-346.
4. 2 layers on cp-Ti and Ti6A14V by thermal and anodic oxidation and by sol-gel coating techniques and their characterization. J Biomed Mater Res 2002;59:18-28.
5. Sul YT, Johansson CB, Petronis S, Krozer A, Jeong Y, Wennerberg A, Albrektsson T. Characteristics of the surface oxides on turned and electrochemically oxidized pure titanium implants up to dielectric breakdown: The oxide thickness, micropore configurations, surface roughness, crystal structure and chemical composition. Biomaterials 2002;23:491-501.
6. Sul YT, Johansson CB, Jeong Y, Roser K, Wennerberg A, Albrektsson T. Oxidized implants and their influence on the bone response. J Mater Sci Mater Med 2001;12:1025-1031.
7. Frauchiger VM, Schlottig F, Gasser B, Textor M. Anodic plasma-chemical treatment of CP titanium surfaces for biomedical applications. Biomaterials 2004;25:593-606.
8. Kawashita M, Cui X-Y, Kim HM, Kokubo T, Nakamura T. Bonelike apatite formation on anodically oxidized titanium metal in simulated body fluid. Key Eng Mater 2004;254-256:459-462.
9. Xiong T-Y, Cui X-Y, Kim M-Y, Kawashita M, Kokubo T, Wu J, Jin H-Z, Nakamura T. Effect of surface morphology and crystal structure on bioactivity of titania films formed on titanium metal via anodic oxidation in sulfuric acid solution. Key Eng Mater 2004;254-256:375-378.
10. Sul YT. The significance of the surface properties of oxidized titanium to the boné response: Special emphasis on potential biochemical bonding of oxidized titanium implant. Biomaterials 2003;24:3893-3907.
11. Ebenstein DM, Pruitt LA. Nanoindentation of biological materials. Nanotoday 2006;1:26-33.
12. Schuh CA. Nanoindentation studies of materials. Mater Today 2006;9:32-40.
13. Mante F, Baran GR, Lucas B. Nanoindentation studies of titanium single crystals. Biomaterials 1999;20:1051-1055.
14. Seo M, Kurata Y. Nano-mechano-electrochemical properties of passive titanium surfaces evaluated by in-situ nano-indentation and nano-scratching. Electrochim Acta 2003;48:3221-3228.
15. Santos E Jr, Kuromoto NK, Soares GA. Mechanical properties of titania films used as biomaterials. Mater Chem Phys 2007;102:92-97.
16. Doerner MF, Nix WD. A method for interpreting the data from depth-sensing indentation instruments. J Mater Res 1986;1:601-609.
17. Bhattacharya AK, Nix WD. Analysis of elastic and plastic-deformation associated with indentation testing of thin-films on substrates. Int J Solids Struct 1988;24:1287-1298.
18. UTHSCSA ImageTool program, University of Texas Health Science Center at San Antonio, TX. Available at 〈ftp://maxrad6.uthscsa.edu〉 [accessed 9 October 2006].
19. Oliver WC, Pharr GM. An improved technique for determining hardness and elasticmodulus using load and displacement sensing indentation experiments. J Mater Res 1992;7:1564-1583.
20. Oh HJ, Lee JH, Jeong Y, Kim YJ, Chi CS. Microstructural characterization of biomedical titanium oxide film fabricated by electrochemical method. Surf Coat Tech 2005;198:247-252.
21. Teh TH, Berkani A, Mato S, Skeldon P, Thompson GE, Habazaki H, Shimizu K. Initial stages of plasma electrolytic oxidation of titanium. Corr Sci 2003;45:2757-2768.
22. Balachandran U, Eror NG. Raman-spectra of titanium-dioxide. J Solid State Chem 1982;42:276-282.
23. Meyer S, Gorges R, Kreisel G. Preparation and characterization of titanium dioxide films for catalytic applications generated by anodic spark deposition. Thin Solid Films 2004;450:276-281.
24. Brunski JB. Metals. In: Ratner BD, Hoffman AS, Schoen FJ, Lemons JE, editors. Biomaterials Science: An Introduction to Materials in Medicine. San Diego: Academic Press; 1996. pp 37-49.
25. Katz JL. Orthopedic applications. In: Ratner BD, Hoffman AS, Schoen FJ,Lemons JE, editors. Biomaterials Science: An Introduction to Materials in Medicine. San Diego: Academic Press; 1996. pp 335-346.
26. Wong M, Eulenberger J, Schenk R, Hunziker E. Effect of surface topology on the osseointegration of implant materials in trabecular bone. J Biomed Mater Res 2004;29:1567-1575.
27. Meyer S, Gorges R, Kreisel G. Formation of crystalline titanium dioxide on barrier layerforming metals in aqueous electrolytes by anodic spark deposition - First mechanistic conceptions. Electrochim Acta 2004;49:3319-3325.
28. Kalra KC, Singh KC, Singh . Electrical breakdown of anodic films on titanium in aqueous electrolytes. J Electroanal Chem 1994;371:73-78.
29. 2), bulk.
30. Major R, Lacki P, Lackner JM, Major B. Modelling of nanoindentation to simulate thin layer behaviour. Bull Pol Acad Sci Technol 2006;54:191-200.
31. Johnson KL. Contact Mechanics, 1st ed. Cambridge, UK: Cambridge University Press; 1985.
32. Milman YV, Chugunova SI. Mechanical properties, indentation and dynamic yield stress of ceramic targets. Int J Impact Eng 1999;23:629-638.
33. King RB. Elastic analysis of some punch problems for a layered medium. Int J Solids Struct 1987;23:1657-1664.
34. Nanjangud SC, Brezny R, Green DJ. Strength and Young modulus behavior of a partially sintered porous alumina. J Am Ceram Soc 1995;78:266-268.
35. Knudsen FP. Effect of porosity on Young modulus of alumina. J Am Ceram Soc 1962;45:94-95.
36. Spriggs RM. Expression for effect of porosity on elastic modulus of polycrystalline refractory materials, particularly aluminum oxide. J Am Ceram Soc 1961;44:628-629.
37. Knudsen FP. Dependence of mechanical strength of brittle polycrystalline specimens on porosity and grain size. J Am Ceram Soc 1959;42:376-387.
38. Coble RL, Kingery WD. Effect of porosity on physical properties of sintered alumina. J Am Ceram Soc 1956;39:377-385.
39. Flinn BD, Bordia RK, Zimmermann A, Rodel J. Evolution of defect size and strength of porous alumina during sintering. J Eur Ceram Soc 2000;20:2561-2568.
40. Kwan YBP, Stephenson DJ, Alcock JR. The porosity dependence of flexural modulus and strength for capsule-free hot isostatically pressed porous alumina. J Mater Sci 2000;35:1205-1211.