On the development of a simple and robust active control system for boring bar vibration in industry

International Journal of Acoustics and Vibrations

Volumn 12, Issue 4, 2007, Pages 139-152

  Åkesson, Henrik ^a   Smirnova, Tatiana ^a   Claesson, Ingvar ^a   Håkansson, Lars ^a,b  

^a BLEKINGE INSTITUTE OF TECHNOLOGY   (Sweden)

^b International Institute of Acoustics and Vibration (IIAV)

Author keywords

[No Author keywords available]

Indexed keywords

ACTUATORS; ADAPTIVE CONTROL SYSTEMS; BORING MACHINES (MACHINE TOOLS); DIGITAL CONTROL SYSTEMS; INDUSTRIAL APPLICATIONS; LATHES;

ADAPTIVE DIGITAL CONTROLLERS; BORING BAR VIBRATION;

VIBRATION CONTROL;

EID: 38349118348     PISSN: 10275851     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (31)

1. Revin E. I. Tooling structure: Interface between cutting edge and machine tool, Annals of the CIRP, 49 (2), 591-634, (2000).
2. Håkansson, L., Johansson, S., and Claesson, I. Chapter 81 - Machine tool noise, vibration and chatter prediction and control, Handbook of Noise and Vibration Control, Malcolm J. Crocker (ed.), John Wiley & Sons, New York, (2007).
3. Sandvik. Modern metal cutting - a practical handbook, AB Sandvik Coromant, 1st edition, (1994).
4. Andren, L., Håkansson, L. Brandt, A., and Claesson, I. Identification of dynamic properties of boring bar vibrations in a continuous boring operation, Journal of Mechanical Systems & Signal Processing, 18 (4), 869-901, (2004).
5. s Andren, L., Håkansson, L. Brandt, A., and Claesson, I. Identification of motion of cutting tool vibration in a continuous boring operation - correlation to structural properties, Journal of Mechanical Systems & Signal Processing, 18 (4), 903-927, (2004).
6. Pettersson, L., Håkansson, L., Claesson, I., and Olsson, S. Active control of boring bar vibration in cutting operations, Proceedings of the Ninth International Congress on Sound and Vibration, (2002).
7. Åkesson, H., Smimova, T., Håkansson, L., Claesson, I., and Lagö, T. Analog versus digital control of boring bar vibration, SAE World Aerospace Congress (WAC), Dallas, Texas, 3-6 October, (2005).
8. Ruud, N. A., Karlsen, R., Sorby, K., and Rieht, C. Minimizing vibration tendencies in machining, Technical Article at http://www.coromant.sandvik.com, (2005).
9. Claesson, I., and Håkansson, L. Active control of machine-tool vibration in a lathe, Proceedings of the Fifth International Congress on Sound and Vibration, (1997).
10. Tewani, S. G., Rouch, K. E., and Walcott, B. L. Active control of machine tool chatter for a boring bar: experimental results, Proceedings of ASME, Vibration and Control of Mechanical Systems, DE-Vol. 61,103-115, (1993).
11. Tewani, S. G., Rouch, K. E., and Walcott, B. L. A study of cutting process stability of a boring bar with active dynamic absorber, International Journal of Machine Tools & Manufacture, 35(1), 91-108, (1995).
12. Browning, D. R., Golioto, I., and Thompson, N. B. Active chatter control system for longoverhang boring bars, Proceedings of SPIE, 3044, 270-280, (1997).
13. Pettersson, L., Håkansson, L., Claesson, I., and Olsson, S. Control of machine-tool vibration in a cnc lathe based on an active tool holder shank with embedded piezo ceramic actuators, Proceedings of the Eight International Congress on Sound and Vibration, (2001).
14. Åkesson, H., Smimova, T., Håkansson, L., Claesson, I., Sigfndsson, A., Svensson, T., and Lagö, T. A first prototype of an active boring bar tested in industry, Proceedings of the Thirteenth International Congress on Sound and Vibration, (2006).
15. Claesson, I. and Håkansson, L. Adaptive active control of machine-tool vibration in a lathe, International Journal of Acoustics and Vibration, 3 (4), 155-162, (1998).
16. Håkansson, L., Johansson, S., Dahl, M., Sjösten, P., and Claesson, I. Chapter 12 - Noise canceling headsets for speech communication, CRC Press Handbook on Noise Reduction in Speech Applications, Gillian M. Davis (ed.). CRC Press, (2002).
17. Fuller, C. R., Elliott, S. J., and Nelson, P. A. Active control of vibration, Academic Press, Inc, (1996).
18. Doyle, J. F. Wave propagation in structures - spectral analysis using fast discret fourier transforms, Springer, second edition, (1997).
19. Hansen, C. H. and Snyder, S. C. Active control of noise and vibration, E & FN SPON, (1997).
20. Inman, D. J. Engineering vibration, Prentice-Hall, second edition, (2001).
21. Han, S. M., Benaroya, H., and Wei, T. Dynamics of transversely vibrating beams using four engineering theories, Journal of Sound and Vibration, 225 (5), 935-988, (1999).
22. Franklin, G. F., Powell, J. D., and Emami-Naeini, A. Feedback control of dynamic systems, Addison Wesley, third edition, (1994).
23. Doyle, J. C., Francis, B. C., and Tannenbaum, A. R. Feedback control theory, Macmillan, (1992).
24. Bendat, J. S. and Piersol, A. G. Random data analysis and measurement procedures, John Wiley & Sons, third edition, (2000).
25. Welch, P. D. The use of fast fourier transform for the estimation of power spectra: a method based on time averaging over short, modified periodograms, IEEE Transactions on Audio and Electroacoustics, 70-73, June, (1967).
26. Franklin, G. F., Powell, J. D., and Emami-Naeini, A. Feedback control of dynamic systems, Prentice Hall, fifth edition, (2006).
27. Elliott, S. J. and Sutton, T. J. Performance of feedforward and feedback systems for active control, IEEE Transactions on Speech and Audio Processing, 4 (3), 214-223, (1996).
28. Elliott, S. J. Signal processing for active control, Academic Press, London, first edition, (2001).
29. Dorf, R. C. and Bishop, R. H. Modern control systems, Prentice Hall, tenth edition, (2005).
30. Beale, G. Phase lead compensator design using bode plots, Course Literature at: http://ece.gmu.edu/ gbeale/ece_421, (2005).
31. Andren, L., Håkansson, L. and Claesson, I. Active control of machine tool vibration in external turning operations, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 111 (B6), 869-872, (2003).