-
1
-
-
0142009023
-
Formability Enhancement in Magnesium Alloy Stamping using a Local Heating and Cooling Technique: Circular Cup Deep Drawing Process
-
3
-
Shoichiro Y., Hisashi N., Hirokuni Y., Manabe K. (2003) Formability Enhancement in Magnesium Alloy Stamping using a Local Heating and Cooling Technique: Circular Cup Deep Drawing Process. J. Mater. Processing Technol. 142(3):609-613
-
(2003)
J. Mater. Processing Technol.
, vol.142
, pp. 609-613
-
-
Shoichiro, Y.1
Hisashi, N.2
Hirokuni, Y.3
Manabe, K.4
-
4
-
-
24144458574
-
Achieving High Strength in Commercial Mg Cast Alloys Through Large Strain Rolling
-
Pérez-Prado M.T., del Valle J.A., Ruano O.A. (2005) Achieving High Strength in Commercial Mg Cast Alloys Through Large Strain Rolling. Mater. Lett. 59:3299-3303
-
(2005)
Mater. Lett.
, vol.59
, pp. 3299-3303
-
-
Pérez-Prado, M.T.1
Del Valle, J.A.2
Ruano, O.A.3
-
5
-
-
2942635558
-
Effect of rolling method on microstructure and properties of AZ31 magnesium alloy thin sheet
-
in Chinese
-
Q.L. Zhang, C. Lu, Y.P. Zhu, and W.J. Ding, (Effect of Rolling Method on Microstructure and Properties of AZ31 Magnesium Alloy thin Sheet). Chin. J. Nonferrous Metals, 2004, 14(3), p 391-397 (in Chinese)
-
(2004)
Chin. J. Nonferrous Metals
, vol.14
, Issue.3
, pp. 391-397
-
-
Zhang, Q.L.1
Lu, C.2
Zhu, Y.P.3
Ding, W.J.4
-
6
-
-
10044245190
-
Improvement of Formability from Room Temperature to Warm Temperature in AZ-31 Magnesium Alloy
-
Iwanaga K., Tashiro H., Okamoto H., Shimizu K. (2004) Improvement of Formability from Room Temperature to Warm Temperature in AZ-31 Magnesium Alloy. J. Mater. Processing Technol. 155-156:1313-1316
-
(2004)
J. Mater. Processing Technol.
, vol.155-156
, pp. 1313-1316
-
-
Iwanaga, K.1
Tashiro, H.2
Okamoto, H.3
Shimizu, K.4
-
7
-
-
0035854538
-
Ductility Enhancement in AZ31 Magnesium Alloy by Controlling its Grain Structure
-
Mukai T., Yamanoi M., Watanabe H., Higashi K. (2001) Ductility Enhancement in AZ31 Magnesium Alloy by Controlling its Grain Structure. Scripta Mater. 45:89-94
-
(2001)
Scripta Mater.
, vol.45
, pp. 89-94
-
-
Mukai, T.1
Yamanoi, M.2
Watanabe, H.3
Higashi, K.4
-
8
-
-
0242408236
-
Enhanced Ductility in Strongly Textured Magnesium Produced by Equal Channel Angular Processing
-
Agnew S.R., Horton J.A., Lillo T.M., Brown D.W. (2004) Enhanced Ductility in Strongly Textured Magnesium Produced by Equal Channel Angular Processing. Scripta Mater. 50:377-381
-
(2004)
Scripta Mater.
, vol.50
, pp. 377-381
-
-
Agnew, S.R.1
Horton, J.A.2
Lillo, T.M.3
Brown, D.W.4
-
9
-
-
0037250674
-
New Deformation Mechanisms in Fine-Grain Mg Alloys
-
Koike J. (2003) New Deformation Mechanisms in Fine-Grain Mg Alloys. Mater. Sci. Forum 419-422:189-194
-
(2003)
Mater. Sci. Forum
, vol.419-422
, pp. 189-194
-
-
Koike, J.1
-
10
-
-
0037603249
-
Texture Development and Its Effect on Mechanical Properties of an AZ61 Mg Alloy Fabricated by Equal Channel Angular Pressing
-
Kim W.J., Hong S.I., Kim Y.S., Min S.H., Jeong H.T., Lee J.D. (2003) Texture Development and Its Effect on Mechanical Properties of an AZ61 Mg Alloy Fabricated by Equal Channel Angular Pressing. Acta Mater. 51:3293-3307
-
(2003)
Acta Mater.
, vol.51
, pp. 3293-3307
-
-
Kim, W.J.1
Hong, S.I.2
Kim, Y.S.3
Min, S.H.4
Jeong, H.T.5
Lee, J.D.6
-
11
-
-
33747335249
-
Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling
-
J.A. del Valle, F. Carreño, and O.A. Ruano, Influence of Texture and Grain Size on Work Hardening and Ductility in Magnesium-based Alloys Processed by ECAP and Rolling. Acta Mater., 2006, 54, p 4247-4259
-
(2006)
Acta Mater.
, vol.54
, pp. 4247-4259
-
-
Del Valle, J.A.1
Carreño, F.2
Ruano, O.A.3
-
12
-
-
0037530270
-
Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy
-
4
-
Yoshida Y., Cisar L., Kamado S., Kojimo Y. (2003) Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy. Materialia Transaction 44(4):468-475
-
(2003)
Mater. Trans.
, vol.44
, pp. 468-475
-
-
Yoshida, Y.1
Cisar, L.2
Kamado, S.3
Kojimo, Y.4
-
13
-
-
7244221735
-
Microstructural Instability and Strength of an AZ31 Mg Alloy after Severe Plastic Deformation
-
Kim H.K., Kim W.J. (2004) Microstructural Instability and Strength of an AZ31 Mg Alloy after Severe Plastic Deformation. Mater. Sci. Eng. A385:300-308
-
(2004)
Mater. Sci. Eng.
, vol.385
, pp. 300-308
-
-
Kim, H.K.1
Kim, W.J.2
-
14
-
-
1442286972
-
Differential Speed Rolling of an AZ31 Magnesium Alloy and the Resulting Mechanical Properties
-
Watanbe H., Mukai T., Ishikawa K. (2004) Differential Speed Rolling of an AZ31 Magnesium Alloy and the Resulting Mechanical Properties. J. Mater. Sci. 39:1477-1480
-
(2004)
J. Mater. Sci.
, vol.39
, pp. 1477-1480
-
-
Watanbe, H.1
Mukai, T.2
Ishikawa, K.3
-
15
-
-
26844439284
-
Texture and Microstructure Changes in Asymmetrically Hot Rolled AZ31 Magnesium Alloy Sheets
-
Kim S.H., You B.S., Yim C.D., Seo Y.M. (2005) Texture and Microstructure Changes in Asymmetrically Hot Rolled AZ31 Magnesium Alloy Sheets. Mater. Lett. 59:3876-3880
-
(2005)
Mater. Lett.
, vol.59
, pp. 3876-3880
-
-
Kim, S.H.1
You, B.S.2
Yim, C.D.3
Seo, Y.M.4
-
16
-
-
0036817975
-
Mechanical Properties and Press Formability at Room Temperature of AZ31 Mg Alloy Processed by Single Roller Drive Rolling
-
10
-
Chino Y., Mabuchi M., Kishihara R., Hosokawa H., Yamada Y., Wen C.E., Shimojima K., Iwasaki H. (2002) Mechanical Properties and Press Formability at Room Temperature of AZ31 Mg Alloy Processed by Single Roller Drive Rolling. Mater. Trans. 43(10):2554-2560
-
(2002)
Mater. Trans.
, vol.43
, pp. 2554-2560
-
-
Chino, Y.1
Mabuchi, M.2
Kishihara, R.3
Hosokawa, H.4
Yamada, Y.5
Wen, C.E.6
Shimojima, K.7
Iwasaki, H.8
-
17
-
-
0034205282
-
Improvement in the r-value of Aluminum Strip by a Continuous Shear Deformation Process
-
Saito Y., Utsunomiya H., Suzuki H. (2000) Improvement in the r-value of Aluminum Strip by a Continuous Shear Deformation Process. Scripta Mater. 42:1139-1144
-
(2000)
Scripta Mater.
, vol.42
, pp. 1139-1144
-
-
Saito, Y.1
Utsunomiya, H.2
Suzuki, H.3
-
18
-
-
2142705831
-
Continuous Grain Refinement of Aluminum Strip by Conshearing
-
Utsunomiya H., Hatsuda K., Sakai T., Saito Y. (2004) Continuous Grain Refinement of Aluminum Strip by Conshearing. Mater. Sci. Eng. A372:199-206
-
(2004)
Mater. Sci. Eng.
, vol.372
, pp. 199-206
-
-
Utsunomiya, H.1
Hatsuda, K.2
Sakai, T.3
Saito, Y.4
-
19
-
-
0035269829
-
Controlling the Textures of the Metal Strips via the Continuous Confined Strip Shearing (C2S2) Process
-
Lee J.C., Seok H.K., Han J.H., Chung Y.H. (2001) Controlling the Textures of the Metal Strips via the Continuous Confined Strip Shearing (C2S2) Process. Mater. Res. Bull. 36:997-1004
-
(2001)
Mater. Res. Bull.
, vol.36
, pp. 997-1004
-
-
Lee, J.C.1
Seok, H.K.2
Han, J.H.3
Chung, Y.H.4
-
20
-
-
0037144297
-
Microstructural Evolutions of the Al Strip Prepared by Cold Rolling and Continuous Equal Channel Angular Pressing
-
Lee J.C., Seok H.K., Suh J.Y. (2002) Microstructural Evolutions of the Al Strip Prepared by Cold Rolling and Continuous Equal Channel Angular Pressing. Acta Mater., 50:4005-4019
-
(2002)
Acta Mater.
, vol.50
, pp. 4005-4019
-
-
Lee, J.C.1
Seok, H.K.2
Suh, J.Y.3
-
21
-
-
0037466645
-
Effect of Precipitates on Microstructural Evolution of 7050 Al Alloy Sheet during Equal Channel Angular Rolling
-
Nam C.Y., Han J.H., Chung Y.H., Shin M.C. (2003) Effect of Precipitates on Microstructural Evolution of 7050 Al Alloy Sheet During Equal Channel Angular Rolling. Mater. Sci. Eng. A347:253-257
-
(2003)
Mater. Sci. Eng.
, vol.347
, pp. 253-257
-
-
Nam, C.Y.1
Han, J.H.2
Chung, Y.H.3
Shin, M.C.4
-
22
-
-
2442507519
-
Grain Refinement of Steel Plate by Continuous Equal-Channel Angular Process
-
Park J.W., Kim J.W., Chung Y.H. (2004) Grain Refinement of Steel Plate by Continuous Equal-Channel Angular Process. Scripta Mater. 51:181-184
-
(2004)
Scripta Mater.
, vol.51
, pp. 181-184
-
-
Park, J.W.1
Kim, J.W.2
Chung, Y.H.3
-
23
-
-
27244451598
-
Microstructures and mechanical properties of AZ31 magnesium alloy sheet processed by equal channel angular rolling
-
in Chinese
-
Y.Q. Cheng, Z.H. Chen, W.J. Xia, and D.F. Fu, (Microstructures and Mechanical Properties of AZ31 Magnesium Alloy Sheet Processed by Equal Channel Angular Rolling), Chin. J. Nonferrous Metals, 2005, 15(9), p 1369-1375 (in Chinese)
-
(2005)
Chin. J. Nonferrous Metals
, vol.15
, Issue.9
, pp. 1369-1375
-
-
Cheng, Y.Q.1
Chen, Z.H.2
Xia, W.J.3
Fu, D.F.4
-
24
-
-
33845798729
-
Effect of equal channel angular rolling pass on microstructure and properties of magnesium alloy sheets
-
Z.H. Chen, Y.Q. Cheng, and W.J. Xia, Effect of Equal Channel Angular Rolling Pass on Microstructure and Properties of Magnesium Alloy Sheets. Mater. Manufacturing Processes, 2007, 22, p 51-56
-
(2007)
Mater. Manufacturing Processes
, vol.22
, pp. 51-56
-
-
Chen, Z.H.1
Cheng, Y.Q.2
Xia, W.J.3
-
25
-
-
0242659890
-
On the Correct Selection of the Channel Die in ECAP Processes
-
Luis Pérez C.J. (2004) On the Correct Selection of the Channel Die in ECAP Processes. Scripta Mater. 50:387-393
-
(2004)
Scripta Mater.
, vol.50
, pp. 387-393
-
-
Luis Pérez, C.J.1
-
26
-
-
0030195813
-
Principle of Equal-Channel Angular Pressing for the Processing of Ultra-fine Grained Materials
-
2
-
Iwahashi Y., Wang J.T., Horita Z., Nemoto M., Langdon T.G. (1996) Principle of Equal-Channel Angular Pressing for the Processing of Ultra-fine Grained Materials. Scripta Mater. 35(2):143-146
-
(1996)
Scripta Mater.
, vol.35
, pp. 143-146
-
-
Iwahashi, Y.1
Wang, J.T.2
Horita, Z.3
Nemoto, M.4
Langdon, T.G.5
-
27
-
-
0037250801
-
Texture Development of AZ31 Magnesium Alloy during ECAE Processing
-
Yoshida Y., Cisar L., Kamado S., Koike J., Kojima Y. (2003) Texture Development of AZ31 Magnesium Alloy during ECAE Processing. Mater. Sci. Forum 419-422:533-538
-
(2003)
Mater. Sci. Forum
, vol.419-422
, pp. 533-538
-
-
Yoshida, Y.1
Cisar, L.2
Kamado, S.3
Koike, J.4
Kojima, Y.5
-
28
-
-
0036133311
-
Texture Evolution during Annealing of Magnesium AZ31 Alloy
-
Pérez-Prado M.T., Ruano O.A. (2002) Texture Evolution During Annealing of Magnesium AZ31 Alloy. Scripta Mater. 46:149-155
-
(2002)
Scripta Mater.
, vol.46
, pp. 149-155
-
-
Pérez-Prado, M.T.1
Ruano, O.A.2
-
29
-
-
0142180128
-
Influence of Initial Textures on Dynamic Recrystallization and Textures in AZ31 Magnesium Alloys
-
3
-
Yang P., Cui F., Ma S.C., Gottstein G. (2003) Influence of Initial Textures on Dynamic Recrystallization and Textures in AZ31 Magnesium Alloys. Trans. Nonferrous Met. Soc. China 13(3):504-508
-
(2003)
Trans. Nonferrous Met. Soc. China
, vol.13
, pp. 504-508
-
-
Yang, P.1
Cui, F.2
Ma, S.C.3
Gottstein, G.4
-
30
-
-
0022107883
-
An in situ Study of Prismatic Glide in Magnesium - I. the Rate Controlling Mechanism
-
8
-
Couret A., Cailiard D. (1985) An in situ Study of Prismatic Glide in Magnesium - I. The Rate Controlling Mechanism. Acta Metal. 33(8):1447-1454
-
(1985)
Acta Metal.
, vol.33
, pp. 1447-1454
-
-
Couret, A.1
Cailiard, D.2
-
31
-
-
0037530322
-
Grain-boundary Sliding in AZ31 Magnesium Alloys at Room Temperature to 523 K
-
4
-
Koike J., Ohyama R., Kobayashi T., Suzuki M., Maruyama K. (2003) Grain-boundary Sliding in AZ31 Magnesium Alloys at Room Temperature to 523 K. Mater. Trans. 44(4):445-451
-
(2003)
Mater. Trans.
, vol.44
, pp. 445-451
-
-
Koike, J.1
Ohyama, R.2
Kobayashi, T.3
Suzuki, M.4
Maruyama, K.5
-
32
-
-
0037958314
-
Deep Drawing and Impact Extrusion of Magnesium Alloys at Room Temperature
-
4
-
Wagener H.W., Hartmann J.H., Reinhard F. (2003) Deep Drawing and Impact Extrusion of Magnesium Alloys at Room Temperature. Adv. Eng. Mater. 5(4):237-242
-
(2003)
Adv. Eng. Mater.
, vol.5
, pp. 237-242
-
-
Wagener, H.W.1
Hartmann, J.H.2
Reinhard, F.3
-
33
-
-
34247892360
-
Drawability of AZ31 magnesium alloy sheet produced by equal channel angular rolling at room temperature
-
Y. Q. Cheng, Z.H. Chen, and W.J. Xia, Drawability of AZ31 Magnesium Alloy Sheet Produced by Equal Channel Angular Rolling at Room Temperature. Mater. Charact., 2007, 58, p 617-622
-
(2007)
Mater. Charact.
, vol.58
, pp. 617-622
-
-
Cheng, Y.Q.1
Chen, Z.H.2
Xia, W.J.3
|