Evaluation of applied plastic strain methods for welding distortion prediction

Journal of Manufacturing Science and Engineering

Volumn 129, Issue 6, 2007, Pages 1000-1010

  Zhang, L ^a   Michaleris, P ^a   Marugabandhu, P ^b  

^a The Pennsylvania State University   (United States)

^b MAGLEV Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANGULAR DISTRIBUTION; BENDING (DEFORMATION); DEGREES OF FREEDOM (MECHANICS); LARGE SCALE SYSTEMS; RESIDUAL STRESSES; WELDING;

ANGULAR DEFORMATION; WELDING DISTORTION;

PLASTIC DEFORMATION;

EID: 38149054860     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2716740     Document Type: Article

References (23)

1. Jung, G. H., and Tsai, C. L., 2004, "Plasticity-Based Distortion Analysis for Fillet Welded Thin-Plate T-Joints," Weld. J. (Miami, FL, U.S.), 83(6), pp. 177-187.
2. Michaleris, P., and DeBiccari, A., 1997, "Prediction of Welding Distortion," Weld. J. (Miami, FL, U.S.), 76(4), pp. 172-180.
3. Oddy, A. S., Goldak, J. A., and McDill, J. M. J., 1990, "Numerical Analysis of Transformation Plasticity in 3D Finite Element Analysis of Welds," Eur. J. Mech. A/Solids, 9(3), pp. 253-263.
4. Tekriwal, P., and Mazumder, J., 1991, "Transient and Residual Thermal StrainStress Analysis of GMAW," J. Eng. Mater. Technol., 113, pp. 336-343.
5. Brown, S. B., and Song, H., 1992, "Implications of Three-Dimensional Numerical Simulations of Welding of Large Structures." Weld. J. (Miami, FL. U.S.), 71(2), pp. 55s-62s.
6. Zhang. L., Reutzel. E. W., and Michaleris, P., 2004, "Finite Element Modeling Discretization Requirements for the Laser Forming Process," Int. J. Mech. Sci., 46(4), pp. 623-637.
7. Masubuchi, K., 1980, Analysis of Welded Structures, Pergamon, Oxford, UK.
8. Ueda, Y., Fukuda, K., Nakacho, K., and Endo, S., 1975, "A New Measuring Method of Residual Stresses with the Aid of Finite Element Method and Reliability of Estimated Values," Trans. JWRI, 4(2), pp. 123-131.
9. Ueda, Y., Kim, Y. C., and Yuan, M. G., 1989, "A Predictive Method of Welding Residual Stress Using Source of Residual Stress (Report I)," Trans. JWRI. 18(1), pp. 135-141.
10. Ueda, Y. and Fukuda, K., 1989, "New Measuring Method of Three-Dimensional Residual Stresses in Long Welded Joints Using Inherent Strains as Parameters," J. Eng. Mater. Technol., 111, pp. 1-8.
11. Ueda, Y., and Yuan, M. G., 1993, "Prediction of Residual Stresses in Butt Welded Plates Using Inherent Strains," J. Eng. Mater. Technol., 115, pp. 417-423.
12. Murakawa, H., Zhong, X. M., and Ueda, Y., 1995, "Buckling Behavior of Plates Under Idealized Inherent Strain," Trans. JWRI, 24(2), pp. 87-91.
13. Murakawa, H., Ma, N. X., Ueda, Y., and Maeda, H., 1995, "Fem Analysis of 3-D Welding Residual Stresses and Angular Distortion in T-Type Fillet Welds," Trans. JWRI, 24(2), pp. 115-122.
14. Yuan, M. G., and Ueda, Y., 1993, "Prediction of Residual Stresses in Welded T- and I-Joints Using Inherent Strains," J. Eng. Mater. Technol., 118, pp. 229-234.
15. Luo, Y., Ishiyama, M., and Murakawa, H., 1999, "Welding Deformation of Plates with Longitudinal Curvature," Trans. JWRI, 28(2), pp. 57-65.
16. Tsai, C. L., Park, S. C., and Cheng, W. T., 1999, "Welding Distortion of a Thin-Plate Panel Structure," Adv. Weld. Sci. Technol., Proc. Int. Conf. Trends Weld. Res., 78, pp. 156s-165s.
17. Jung, G. H., 2003, "Plasticity-Based Distortion Analysis for Fillet Welded Thin Plate T-Joints," Ph.D. thesis, Ohio State University, Columbus, OH.
18. Bathe, K. J., 1996, finite Element Procedures, Prentice-Hall, Inc., Upper Saddle River, NJ.
19. Crisfield, M. A., 1991, Non-linear Finite Element Analysis of Solids and Structures, Vols. 1 of 2, Wiley & Sons Ltd., West Sussex, UK.
20. Crisfield, M. A., 1997, Non-linear Finite Element Analysis of Solids and Structures, Vols. 2, Wiley & Sons Ltd., West Sussex, UK.
21. Zhang, L., and Michaleris, P., 2004, "Investigation of Lagrangian and Eulerian Finite Element Methods for Modeling the Laser Forming Process," Finite Elem. Anal. Design, 40(4), pp. 383-405.
22. Goldak, J., Chakravarti, A., and Bibby, M., 1984, "A New Finite Element Model for Welding Heat Sources," Metall. Trans. B, 15B, pp. 299-305.
23. Sun, J., 2005, "Modeling and Finite Element Analysis of Welding Distortion and Residual Stresses in Large and Complex Structures." Ph.D. thesis. The Pennsylvania State University, University Park, PA.