A review of blast and impact of metallic and sandwich structures

Electronic Journal of Structural Engineering

Volumn 7, Issue , 2007, Pages 92-101

  Zhu, F ^a   Lu, G ^a  

^a SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

ACCELERATION; BALLISTICS; MATHEMATICAL MODELS; PLASTIC DEFORMATION; PRESSURE MEASUREMENT;

ANALYTICAL MODELS; BALLISTIC PENDULUMS; BLAST WAVES;

SANDWICH STRUCTURES;

EID: 38149038703     PISSN: 14439255     EISSN: 14439255     Source Type: Journal    
DOI: None     Document Type: Review

References (62)

1. Abrahamson, G.R., and Lindberg, H.E., (1976) Peak load-impulse characterization of critical pulse loads in structural dynamics, Nuclear Engineering Design; 37: 35-46.
2. Ashby, M.F., Evans, A., Fleck, N.A., Gibson, L.J., Hutchinson, J.W., Wadley, H.N.G., (2000) Metal foams: a design guide, Butterworth-Heineman, Oxford.
3. Baker, W., Cox, P., Westine, P., Kulesz, J. and Strehlow, R. (1983) Explosion hazards and evaluation, Elsevier, New York.
4. Biggs, J.M. (1964) Introduction to structural dynamics, McGraw-Hill, New York.
5. Boyd, S.D., (2002) Acceleration of a plate subject to explosive blast loading - Trial results. Internal Report DSTO-TN-0270; Department of Defence, Australia.
6. Cloete, T.J., Nurick, G.N., and Palmer, R.N. (2005) The deformation and shear failure of peripherally clamped centrally supported blast loaded circular plates, International Joumal of Impact Engineering; 32: 92-117.
7. Cole, R.H. (1948) Underwater explosions. Dover, New York.
8. CONWEP (1991) - Conventional Weapons Effects program, Version 2.00; US Army Engineer Waterways Experimental Station, Vicksburg, MS, USA.
9. Enstock, L.K., and Smith, P.D., Measurement of impulse from the close-in explosion of doped charges using a pendulum, International Journal of Impact Engineering, In press.
10. Fleck NA, Deshpande VS. (2004) The resistance of clamped sandwich beams to shock loading. Journal of Applied Mechanics, ASME; 71: 1-16.
11. nd edition), Cambridge University Press, Cambridge.
12. Guruprasad, S., and Mukherjee, A. (2000) Layered sacrificial claddings under blast loading Part II - experimental studies, International Journal of Impact Engineering; 24: 975-984.
13. Hallquist, J.O., LS-DYNA (1998) theoretical manual, Livermore software technology Co.; Livermore, CA, USA.
14. Hanssen, A.G., Enstock, L., and Langseth, M (2002) Close-range blast loading of aluminium foam panels, International Journal of Impact Engineering; 27: 593-618.
15. Hanssen, A.G., Hopperstad, O.S., Langseth, M. and Ilstad, H. (2002) Validation of constitutive models applicable to aluminium foams, International Journal of Mechanical Sciences; 44: 359-406.
16. Hodge, P.G. (1956), The influence of blast characteristics on the final deformation of circular cylindrical shells. Journal of Applied Mechanics; 23: 617-624.
17. Jacinto, A.C., Ambrosini, R.D. and Danesi, R.F. (2001) Experimental and computational analysis of plates under air blast loading, International Journal of Impact Engineering; 25: 927-947.
18. th International Symposium on Ballistics; The Hague, The Netherlands.
19. Jones, N. (1989) Structural Impact. Cambridge University Press, UK.
20. Jones, N. (1989) Recent studies on the dynamic plastic behaviour of structures, Applied Mechanics Review; 42(4): 95-115.
21. Kinney, G., and Graham, K. (1985) Explosive shocks in air, 2nd Ed, Springer-Verlag, New York.
22. Langdon, G.S., Yuen, S.C.K., and Nurick, G.N. (2005) Experimental and numerical studies on the response of quadrangular stiffened plates. Part II: localised blast loading, International Journal of Impact Engineering; 31:85-111.
23. Lee, Y.W., and Wierzbicki, T. (2005) Fracture prediction of thin plates under localized impulsive loading. Part I: dishing, International Journal of Impact Engineering; 31: 1253-1276.
24. Lee, Y.W., and Wierzbicki, T., (2005)Fracture prediction of thin plates under localized impulsive loading. Part II: discing and petalling, International Journal of Impact Engineering; 31: 1277-1308.
25. Li, Q.M., and Jones, N. (2000) Formation of shear localization in structural elements under transverse dynamic loads, International Journal of Solids and Structures; 37: 6683-6704.
26. Li, Q.M., and Jones, N. (1999) Shear and adiabatic shear failures in an impulsively loaded fully clamped beam, International Journal of Impact Engineering,; 22: 589-607.
27. Li, Q.M., and Meng, H. (2002) Pulse loading shape effects on pressure-impulse diagram of an elastic-plastic, single-degree-of-freedom structural model, International Journal of Mechanical Sciences; 44: 1985-1998.
28. Lu, G., and Yu, TX (2003) Energy Absorption of Structures and Materials. Woodhead, Cambridge, UK. (Its Chinese edition is published by Chemical Industry Press, Beijing, China, 2006)
29. Menkes, S.B., and Opat, H.J. (1973), Tearing and shear failures in explosively loaded clamped beams, Experimental Mechanics; 13: 480-486.
30. Neuberger, A., Peles, S. and Rittel, D., Scaling the response of circular plates subjected to large and close-range sperical explosions. Part I: Air-blast loading, International Journal of Impact Engineering, In press.
31. Neuberger, A., Peles, S. and Rittel, D., Scaling the response of circular plates subjected to large and close-range sperical explosions. Part II: Buried loading, International Journal of Impact Engineering, In press.
32. Nurick, G.N., and Martin, J.B. (1989) Deformation of thin plates subjected to impulsive loading - A review Part I: Theoretical considerations, International Journal of Impact Engineering; 8(2): 159-170.
33. Nurick, G.N., and Martin, J.B. (1989) Deformation of thin plates subjected to impulsive loading - a review, Part II: Experimental Studies, International Journal of Impact Engineering; 8(2): 159-170.
34. Nurick, G.N., and Shave, G.C. (1996) The deformation and tearing of thin square plates subjected to impulsive loads - an experimental study, International Journal of Impact Engineering; 18(1): 99-116.
35. Nurick, G.N., Gelman, M.E., and Marshall, N.S. (1996) Tearing of blast loaded plates with clamped boundary conditions, International Journal of Impact Engineering; 18(7-8): 803-827.
36. Olson, M.D. Nurick, G.N., Fagnan, J.R. (1993) and Levin, A., Deformation and rupture of blast loaded square plates - predictions and experiments. International Journal of Impact Engineering; 13(2): 279-291.
37. Qiu X, Deshpande VS, Fleck NA. Dynamic response of a clamped circular sandwich plate subject to shock loading, Journal of Applied Mechanics, ASME; 71: 637-645.
38. Qiu X, Deshpande VS, Fleck NA. (2004) Impulsive loading of clamped monolithic and sandwich beam over a central patch. Journal of the Mechanics and Physics of Solids, 2005; 53: 1015-1046.
39. Radford DD, Fleck NA, Deshpande VS. (2006) The response of clamped sandwich beams subject to shock loading. International Journal of Impact Engineering; 32: 968-987.
40. Ramajeyathilagam, K., Vendhan, C.P., and Bhujanga Rao, V. (2000) Non-linear transient dynamic response of rectangular plates under shock loading, International Journal of Impact Engineering; 24: 999-1015.
41. Rudrapatna, N.S., Vaziri, R., and Olson, M.D. (1999) Deformation and failure of blast-loaded square plates, International Journal of Impact Engineering; 22:449-467.
42. Rudrapatna, N.S., Vaziri, R., and Olson, M.D. (2000) Deformation and failure of blast-loaded stiffened plates, International Journal of Impact Engineering; 24:457-474.
43. Schleyer, G.K, and Hsu, S.S. (2000) A modelling scheme for predicant the response of elastic-plastic structures to pulse pressure loading, International Journal of Impact Engineering; 24: 759-777.
44. Schleyer, G.K., Hsu, S.S., White, M.D., and Birch, R.S. (2003) Pulse pressure loading of clamped mild steel plates, International Journal of Impact Engineering; 28: 223-247.
45. Shen, W.Q., and Jones, N. (1993) Dynamic response and failure of fully clamped circular plates under impulsive loading, International Journal of Impact Engineering; 13: 259-278.
46. Smith, P.D., Heterington, J.G. (1994) Blast and ballistic loading of structures, Butterworth-Heinemann Ltd., Oxford.
47. Stronge, W.J., and Yu, T.X. (1993) Dynamic models for structural plasticity, Springer-Verlag, London.
48. Symmonds, P.S. (1954) Large plastic deformation of beams under blast type loading, Proceedings of the Second US National Congress of Applied Mechanics; 505-515.
49. Symonds, P.S. (1953) Dynamic load characteristics in plastic bending of beams, Journal of Applied Mechanics; 20: 475-481.
50. Symonds, P.S. (1980) Elastic, finite deflection and strain rate effects in a mode approximation technique for plastic deformation of pulse loaded structures, Journal of Mechanical Engineering Science; 22(4): 189-197.
51. Symonds, P.S. (1980) Finite elastic and plastic deformations of pulse loaded structures by and extended mode technique, International Journal of Mechanical Sciences; 22(10): 597-605.
52. Teeling-Smith, R.G., and Nurick, G.N. (1991) The deformation and tearing of thin circular plates subjected to impulsive loads, International Journal of Impact Engineering; 11(1): 77-91.
53. Wang, A.J., and Hopkins, H.G. (1954) On the plastic deformation of built-in circular plates under impulsive load, Journal of Mechanics and Physics of Solids; 3: 22-37.
54. Wen, H.M., and Jones, N. (1996) Low velocity perforation of punch-impact loaded metal plates, Journal of Pressure Vessel Technology, Transactions of ASME; 118(2): 181-187.
55. Wen, H.M., Yu, T.X., and Reddy, T.Y. (1995) Failure maps of clamped beams under impulsive loading, Mechanics Based Design of Structures and Machines; 23: 453-472.
56. Wierzbicki, T., and Nurick, G.N. (1996) Large deformation of thin plates under localized impulsive loading, International Journal of Impact Engineering; 18: 899-918.
57. Xue, Z., and Hutchinson, J.W. (2004) A comparative study of blast-resistant metal sandwich plates, International Journal of Impact Engineering; 30: 1283-1305.
58. Yankelevsky, D.Z. (1985) Elastic-plastic blast response of rectangular plates, International Journal of Impact Engineering; 3(2): 107-119.
59. Youngdahl, C.K. (1970) Correlation parameters for eliminating the effect of pulse shape on dynamic plastic deformation, Journal of Applied Mechanics; 37: 744-752.
60. Yu, T.X., and Chen, F.L. (1992) The large deflection dynamic plastic response of rectangular plates, International Journal of Impact Engineering, 12(4): 603-616.
61. Yuen, S.C.K., and Nurick, G.N. (2005) Experimental and numerical studies on the response of quadrangular stiffened plates. Part I: subjected to uniform blast load, International Journal of Impact Engineering; 31: 55-83.
62. Zhu, L. (1996) Transient deformation models of square plates subjected to explosive loadings, International Journal of Solids and Structures; 33(3): 301-314.