Fluidized bed assisted abrasive jet machining (FB-AJM): Precision internal finishing of Inconel 718 components

Journal of Manufacturing Science and Engineering

Volumn 129, Issue 6, 2007, Pages 1045-1059

  Barletta, M ^a   Ceccarelli, D ^a   Guarino, S ^a   Tagliaferri, V ^a  

^a UNIVERSITY OF ROME TOR VERGATA   (Italy)

Author keywords

Finishing characteristics; Fluidized bed assisted abrasive finishing; Inconel 718; Internal finishing; Residual stress; Roundness; Surface roughness

Indexed keywords

ABRASIVES; FINISHING; FLUIDIZED BEDS; PRESSURE EFFECTS; RESIDUAL STRESSES; SURFACE ROUGHNESS;

FINISHING CHARACTERISTICS; FLUIDIZED BED ASSISTED ABRASIVE FINISHING; INTERNAL FINISHING; ROUNDNESS;

MACHINING;

EID: 38149037844     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2752831     Document Type: Article

References (34)

1. Lim, M.-K., Oh, S.-D., and Lee, Y.-Z., 2003 "Friction and Wear of Inconel 690 and Inconel 600 for Steam Generator Tube in Room Temperature Water," Nucl. Eng. Des., 226, pp. 97-105.
2. Arunachalam, R. M., Mannan, M. A., and Spowage, A. C., 2004, "Surface Integrity When Machining Ag Hardened Inconel 718 With Coated Carbide Cutting Tools," Int. J. Mach. Tools Manuf., 44, pp. 1481-1491.
3. Dudzinski, D., Devillez, A., Moufki, A., Larrouquere, D., Zerrouki, V., and Vigneau, J., 2004, "A Review of Developments Towards Dry and High Speed Machining of Inconel 718 Alloy," Int. J. Mach. Tools Manuf., 44, pp. 439-456.
4. Shaw, M. C., 1996, Principles of Abrasive Processing, Clarendon Press, Oxford, Oxford Series on Advanced Manufacturing.
5. Davis, J. R., 1989, ASM Metal Handbook, Machining, 9th ed., American Society for Metals, Metals Park, OH.
6. Jain, N. K., and Jain, V. K., 2001, "Modeling of Material Removal in Mechanical Type Advanced Machining Processes: A State-of-Art Review," Int. J. Mach. Tools Manuf., 41, pp. 1573-1635.
7. Birch, J. R., and Burleigh, T. D., 2000, "Oxides Formed on Titanium by Polishing, Etching, Anodizing, or Thermal Oxidizing," Corrosion (Houston), 56, pp. 1233-1241.
8. Khodke, P. M., and Tidke, D. J., 1996, "Abrasive Jet Machining: A state-of-Art Review," J. Inst. Eng. (India), Part AG, 77, pp. 1-8.
9. Jain, R. K., Jain, V. K., and Dixit, P. M., 1999, "Modeling of Material Removal and Surface Roughness in Abrasive Flow Machining Process," Int. J. Mach. Tools Manuf., 39, pp. 1903-1923.
10. Kremen, G. Z., Elsayed, E. A., and Rafalovich, V. I., 1996, "Mechanism of Material Removal in the Magnetic Abrasive Process and the Accuracy of Machining," Int. J. Prod. Res., 34, pp. 2629-2638.
11. Ramachandran, N., and Ramakrishnan, N., 1993, "Abrasive Jet Machining Upcoming Technology in Metal Processing: A Review," J. Mater. Process. Technol., 39, pp. 21-30.
12. Kim, J.-D., Kang, Y.-H., Bae, Y-H., and Lee, S.-W., 1997, "Development of a Magnetic Abrasive Jet Machining System for Precision Internal Polishing of Circular Tubes," J. Mater. Process. Technol., 71, pp. 384-393.
13. Balasubramaniam, R., Krishnan, J., and Ramakrishnan, N., 1998, "Investigation of AJM for Deburring," J. Mater. Process. Technol., 79, pp. 52-58.
14. Balasubramaniam, R., Krishnan, J., and Ramakrishnan, N., 2002, "A Study on the Shape of the Surface Generated by Abrasive Jet Machining," J. Mater. Process. Technol., 121, pp. 102-106.
15. Barletta, M., and Tagliaferri, V., 2006, "Development of an Abrasive Jet Machining System Assisted by Two Fluidized Beds for Internal Polishing of Circular Tubes," Int. J. Mach. Tools Manuf., 46(3-4), pp. 271-283.
16. Barletta, M., Guarino, S., Rubino, G., and Tagliaferri, V., 2006, "Progress in Fluidized Bed Assisted Abrasive Jet Machining (FB-AJM): Internal Polishing of Aluminum Tubes," Int. J. Mach. Tools Manufacture, approved July, available online at www.scienceserver.com.
17. Dagnall, H., 1998, Exploring Surface Texture, Taylor Hobson Limited, Leicester, UK.
18. Vishay Measurement Group, 1988 "Measurement of Residual Stresses by the Blind Hole-Drilling Method," Tech Note TN-503.
19. Kim, J.-D., Kang, Y.-H., Bae, Y.-H., and Lee, S.-W., 1997, "Development of a Magnetic Abrasive Jet Machining System for Precision Internal Polishing of Circular Tubes," J. Mater. Process. Technol., 71, pp. 384-393.
20. Venkatesh, V. C., Goh, T. N., Wong, K. H., and Lim, M. J., 1989, "An Empirical Study of Parameters in Abrasive Jet Machining," Int. J. Mach. Tools Manuf., 29, pp. 471-479.
21. Jain, V. K., and Adsul, S. G., 2000, "Experimental Investigation Into Abrasive Flow Machining," Int. J. Mach. Tools Manuf., 40, pp. 1003-1021.
22. Yamaguchi, H., and Shinmura, T., 1999, "Study of the Surface Modification Resulting From an Internal Magnetic Abrasive Finishing Process," Wear, 225-229, pp. 246-255.
23. Zhu, J., Grace, J. R., and Lim, C. J., 1990, "Tube Wear in Gas Fluidized Bed - I. Experimental Findings," Chem. Eng. Sci., 45, pp. 1003-1015.
24. Zhu, J., Grace, J. R., and Lim, C. J., 1991, "Tube Wear in Gas Fluidized Bed - II. Low Velocity Impact Erosion and Semi-Empirical Model for Bubbling and Slugging Fluidized Beds," Chem. Eng. Sci., 46, pp. 1151-1156.
25. Barletta, M., 2005, "A New Technology in Surface Finishing: Fluidized Bed Machining (FBM) of Aluminium Alloys," J. Mater. Process. Technol., approved September, available online at www.scienceserver.com.
26. Ramachandran, N., and Ramakrishnan, N., 1993, "Abrasive Jet Machining Upcoming Technology in Metal Processing: A Review," J. Mater. Process. Technol., 39, pp. 21-30.
27. Balasubramaniam, R., Krishnan, J., and Ramakrishnan, N., 1998, "Investigation of AJM for Deburring," J. Mater. Process. Technol., 79, pp. 52-58.
28. Balasubramaniam, R., Krishnan, J., and Ramakrishnan, N., 2002, "A Study on the Shape of the Surface Generated by Abrasive Jet Machining," J. Mater. Process. Technol., 121, pp. 102-106.
29. Barletta, M., Costanza, G., and Polini, R., 2005, "Al2O3 Thin Coating of AA 6082 T6 components using a Fast Regime Fluidized Bed," Thin Solid Films, approved November, available online at www.scienceserver.com.
30. Barletta, M., Gisario, A., and Tagliaferri, V., 2005, "Electrostatic Spray Deposition (ESD) of Polymeric Powders on Thermoplastic (PA66) Substrate," Surf. Coat. Technol., approved November, available online at www.scienceserver.com.
31. Yamaguchi, H., and Shinmura, T., 1996, "Study on a New Internal Finishing Process by the Application of Magnetic Abrasive Machining," J. Jpn. Soc. Precis. Eng., 62(11), pp. 1617-1621 (in Japanese).
32. Sadat, A. B., and Reddy, M. Y., 1993, "Surface Integrity of Inconel-718 Nickel-Base Superalloy Using Controlled and Natural Contact Length Tools," Exp. Mech., 33, pp. 343-348.
33. Yamaguchi, H., and Shinmura, T., 2004, "Internal Finishing Process for Alumina Ceramic Components by a Magnetic Field Assisted Finishing Process," Precis. Eng., 28, pp. 135-142, 2004,
34. "Internal Finishing Process for Alumina Ceramic Components by a Magnetic Field Assisted Finishing Process," Precis. Eng., 28, 181-184.