Titanium with aligned, elongated pores for orthopedic tissue engineering applications

Journal of Biomedical Materials Research - Part A

Volumn 84, Issue 2, 2008, Pages 402-412

  Spoerke, Erik D ^a,c   Murray, Naomi G D ^a,d   Li, Huanlong ^a   Brinson, L Catherine ^a   Dunand, David C ^a   Stupp, Samuel I ^a,b  

^a Northwestern University   (United States)

^b NORTHWESTERN UNIVERSITY   (United States)

^c SANDIA NATIONAL LABORATORIES   (United States)

^d STRYKER ORTHOPAEDICS   (United States)

Author keywords

Anisotropy; Bone; Finite element; Mechanical properties; Orthopedic tissue engineering; Osteoblasts; Titanium foam

Indexed keywords

ANISOTROPY; BONE; FINITE ELEMENT METHOD; FOAMS; OSTEOBLASTS; TISSUE ENGINEERING; TITANIUM;

ORTHOPEDIC TISSUE ENGINEERING; TITANIUM FOAMS;

ORTHOPEDICS;

TITANIUM;

ANIMAL CELL; ANISOTROPY; ARTICLE; BIOCOMPATIBILITY; BONE; CELL CULTURE; COMPUTER PROGRAM; FINITE ELEMENT ANALYSIS; FOAM; IMPLANT; LOADING TEST; LONG BONE; MECHANICAL STRESS; MODEL; NONHUMAN; ORTHOPEDIC SURGERY; OSTEOBLAST; POWDER; RAT; SCANNING ELECTRON MICROSCOPY; THREE DIMENSIONAL IMAGING; TISSUE ENGINEERING; WIRE FIXATION; YOUNG MODULUS;

EID: 38049068205     PISSN: 15493296     EISSN: 15524965     Source Type: Journal    
DOI: 10.1002/jbm.a.31317     Document Type: Article

References (39)

1. Urban R, Jacobs J, Sumner D, Peters C, Voss F, Galante J. The bone-implant interface of femoral stems with non-circumferential porous coating - A study of specimens retrieved at autopsy. J Bone Jt Surg - Am Vol, 1996;78A:1068-1081.
2. Laing PG. Tissue reaction in rabbit muscle exposed to metallic implants. J Biomed Mater Res 1967;1:135-149.
3. Hayashi K, Uenoyama K, Matsuguchi N, Sugioka Y. Quantitative analysis of in vivo tissue responses to titanium-oxide and hydroxyapatite-coated titanium alloy. J Biomed Mater Res 1991;25:515-523.
4. Albrektsson T, Branemark PI, Hansson HA, Kasemo B, Larsson K, Lundstrom I, McQueen DH, Skalak R. The interface zone of inorganic implants in vivo: Titanium implants in bone. Annals Biomed Eng 1983;11:1-27.
5. Dunand DC. Processing of titanium foams. Adv Eng Mater 2004;6:369-376.
6. Asaoka K, Kuwayama N, Okuno O, Miura I. Mechanical properties and biomechanical compatibility of porous titanium for dental implants. J Biomed Mater Res 1985;19:699-713.
7. Oh IH, Nomura N, Masahashi N, Hanada S. Mechanical properties of porous titanium compacts prepared by powder sintering. Scripta Mater 2003;49:1197-1202.
8. Murray GAW, Semple JC. Transfer of tensile loads from a prosthesis to bone using porous titanium. J Bone Jt Surg - Br Vol 1981;63:138-141.
9. Bram M, Stiller C, Buchkremer HP, Stover D, Baur H. High-porosity titanium, stainless steel, and superalloy parts. Adv Eng Mater 2000;2:196-199.
10. Wen CE, Mabuchi M, Yamada Y, Shimojima K, Chino Y, Asahina T. Processing of biocompatible porous Ti and Mg. Scripta Mater 2001;45:1147-1153.
11. Kearns M, Blenkinsop P, Barber A, Farthing T. Manufacture of a novel porous metal. Met Mater 1987;3:85.
12. Kearns MW, Blenkinsop PA, Barber AC, Farthing TW. Manufacture of a novel porous metal. Int J Powder Metall 1988;24:59-64.
13. Murray NGD, Dunand DC. Microstructure evolution during solid-state foaming of titanium. Compos Sci Technol 2003;63:2311-2316.
14. Davis N, Teisen J, Schuh C, Dunand D. Solid-state foaming of titanium by superplastic expansion of argon-filled pores. J Mater Res 2001;16:1508-1519.
15. Murray NGD, Dunand DC. Effect of thermal history on the superplastic expansion of argon-filled pores in titanium. II. Modeling of kinetics. Acta Mater 2004;52:2279-2291.
16. Murray N, Dunand D. Effect of thermal history on the superplastic expansion of argon-filled pores in titanium. I. Kinetics and microstructure. Acta Mater 2004;52:2269-2278.
17. Murray NGD, Dunand DC. Effect of initial preform porosity on solid-state foaming of titanium. J Mater Res 2006;21:1175-1188.
18. Spoerke E, Murray N, Li H, Brinson L, Dunand D, Stupp S. Organoapaite-titanium foam: A bioactive composite for orthopedic tissue engineering. Acta Biomater 2005;1:523-533.
19. Wen C, Yamada Y, Shimojima K, Chino Y, Hosokawa H, Mabuchi M. Novel titanium foam for bone tissue engineering. J Mater Res 2002;17:2633-2639.
20. Weiner S, Wagner HD. The material bone: Structure-mechanical function relations. Annu Rev Mater Sci 1998;28:271-298.
21. Bonfield W, Grynpas M. Anisotropy of the Young's modulus of bone. Nature 1977;270:453-454.
22. Katz JL, Yoon HS. The structure and anisotropic mechanical properties of bone. IEEE Trans Biomed Eng 1984;31:878-884.
23. Fan Z, Swadener JG, Rho JY, Roy ME, Pharr GM. Anisotropic properties of human tibial cortical bone as measured by nanoindentation. J Orthop Res 2002;20:806-810.
24. Gibson L, Ashby M. Cellular Solids: Structure and Properties. Oxford: Pergamon; 1988.
25. Elmer JW, Wong J, Ressler T. Spatially resolved X-ray diffraction phase mapping and alpha → beta → alpha transformation kinetics in the heat-affected zone of commercially pure titanium arc welds. Metall Mater Trans A 1998;29:2761-2773.
26. Dunand DC, Bedell CM. Transformation-mismatch superplasticity in reinforced and unreinforced titanium. Acta Mater 1996;44:1063-1076.
27. Dunand DC, Myojin S. Biaxial deformation of Ti-6A1-4V and Ti-6Al-4V/TiC composites by transformation-mismatch superplasticity. Mater Sci Eng A 1997;230:25-32.
28. Frost H, Ashby M. Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics. London, UK: Pergamon; 1982.
29. Boyer H. Atlas of Stress-Strain Curves. Materials Park, OH: ASM International; 2002.
30. Reed K, Brown T. Elastic, yield and ultimate properties of Emu cortical bone. Iowa Orthop J 2001;21:53-58.
31. Shen H, Brinson L. Finite element modeling of porous titanium. Int J Solids Struct 2007;44:320-335.
32. Thelen S, Barthelat F, Brinson L. Mechanical considerations for microporous titanium as an orthopedic implant material. J Biomed Mater Res 2004;69A:601-610.
33. Shen H, Brinson LC. A numerical investigation of the effect of boundary conditions and representative volume element size for porous titanium. J Mech Mater Struct 2007;1:1179-1205.
34. Li H, Oppenheimer S, Stupp S, Dunand D, Brinson L. Effects of pore morphology and bone ingrowth on mechanical properties of microporous titanium as an orthopedic implant material. Mater Trans 2004;45:1124-1131.
35. Pavlin D, Dove SB, Zadro R, Gluhak-Heinrich J. Mechanical loading stimulates differentiation of periodontal osteoblasts in a mouse osteoinduction model: Effect on type I collagen and alkaline phosphatase genes. Calcif Tissue Int 2000;67:163-172.
36. Weyts FAA, Bosmans B, Niesing R, van Leeuwen J, Weinans H. Mechanical control of human osteoblast apoptosis and proliferation in relation to differentiation. Calcif Tissue Int 2003;72:505-512.
37. Wolf S, Augat P, Eckert-Hubner K, Laule A, Krischak GD, Claes LE. Effects of high-frequency, low-magnitude mechanical stimulus on bone healing. Clin Orthop Relat Res 2001;192-198.
38. Perizzolo D, Lacefield W, Brunette D. Interaction between topography and coating in the formation of bone nodules in culture for hydroxyapatite- and titanium-coated micromachined surfaces. J Biomed Mater Res 2001;56:494-503.
39. Matsuzaka K, Walboomers X, Yoshinari M, Inoue T, Jansen T. The attachment and growth of osteoblast-like cells on microtextured surfaces. Biomaterials 2003;24:2711-2719.