Comparative in vitro performances of bare Nitinol surfaces

Bio-Medical Materials and Engineering

Volumn 18, Issue 1, 2008, Pages 1-14

  Shabalovskaya, S ^a,c   Anderegg, J ^a   Rondelli, G ^b   Vanderlinden, W ^c   De Feyter, S ^c  

^a IOWA STATE UNIVERSITY   (United States)

^b CNR   (Italy)

^c UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Fibrinogen; Nickel release; NiTi surface topography; Open circuit potential; Platelets; Roughness; Thrombogenicity

Indexed keywords

NICKEL; PLATELETS; SURFACE TOPOGRAPHY;

FIBRINOGEN; NICKEL RELEASE; NITI SURFACE TOPOGRAPHY; OPEN CIRCUIT POTENTIAL; THROMBOGENICITY;

NICKEL COMPOUNDS;

FIBRINOGEN; NICKEL; NITINOL;

ADSORPTION; ARTICLE; ATOMIC ABSORPTION SPECTROMETRY; ATOMIC FORCE MICROSCOPY; BIOCOMPATIBILITY; COMPARATIVE STUDY; CONTROLLED STUDY; ELECTROCHEMISTRY; HUMAN; PRIORITY JOURNAL; PROTEIN BINDING; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; THROMBOCYTE ADHESION; THROMBOGENICITY;

ADSORPTION; BIOCOMPATIBLE MATERIALS; BLOOD PLATELETS; CELLS, CULTURED; FIBRINOGEN; HUMANS; NANOSTRUCTURES; PLATELET AGGREGATION; PROTEIN BINDING; SURFACE PROPERTIES;

EID: 38049062186     PISSN: 09592989     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (31)

1. B. Chandrasekar and J.-F. Tanguay, Platelets and restenosis, J. Am. Coll. Cardiol. 35 (2000), 555-562.
2. J. Courtney, N. Lamba, S. Sundaram and C. Forbes, Biomaterials for blood-contacting applications, Biomaterials 15 (1994), 737-744.
3. O. Cisse, O. Savagodo, M. Wu and L'H. Yahia, Effect of surface treatment of NiTi alloy on its corrosion behavior in Hank's solution, J. Biomed. Mater. Res. 61 (2002), 339-345.
4. F. Villermaux, M. Tabrizian, L.H. Yahia, G. Czeremuszkin and D. Piron, Corrosion resistance improvement by plasma coating, Biomed. Mater. Eng. 6 (1996), 241-254.
5. D. Armitage, T. Parker and D. Grant, Biocompatibility and hemocompatibility of surface-modified NiTi alloys, J. Biomed. Mater. Res. 66A (2003), 129-137.
6. S. Plant, D. Grant and L. Leach, Behavior of human endothelial cells on surface modified NiTi alloy, Biomaterials 26 (2005), 5359-5367.
7. J. Wataha, P. Lockwood, M. Marek and M. Ghazi, Ability of Ni-containing biomedical alloys to activate monocytes and endothelial cells in vitro, J. Biomed. Mater. Res. 45 (1999), 251-257.
8. J. Palmaz, S. Bailey, D. Marton and E. Sprague, Influence of stent design and material composition on procedure outcome, Basic Sci. Rev. Article 36 (2002), 1031-1040.
9. B. Thierry, Y. Merhi, L. Bilodeau, C. Trepanier and M. Tabrizian, Nitinol versus stainless steel stents: Acute thrombogenicity study in an ex vivo porcine model, Biomaterials 23 (2002), 2997-3005.
10. S. Goodman, Sheep, pig, and human platelet-material interactions with model cardiovascular biomaterials, J. Biomed. Mater. Res. 42 (1999), 240-250.
11. G. Barbato, K. Carneiro, D. Cuppini, J. Garnaes, G. Gori, G. Hughes, C.P. Jensen, J.F. Jørgensen, O. Jusko, S. Livi, H. McQuoid, L. Nielsen, G.B. Picotto and G. Wilkening, Scanning tunnelling microscopy methods for roughness and micro hardness measurements, Synthesis Report for research contract with the European Union. European Commission Catalogue number: CD-NA-16145 EN-C, Brussels-Luxenburg, 1995.
12. T. Horbett, Adsorption of proteins from plasma to a series of hydrophilic-hydrophobic copolymers. II. Compositional analysis with the pre-labeled protein technique, J. Biomed. Mater. Res. 15 (1981), 673-695.
13. S. Tringwell, R. Hyden, K. Nelson and G. Selvaduray, Effects of surface treatments on surface chemistry of NiTi alloy for biomedical applications, Surf. Interf. Anal. 26 (1998), 483-489.
14. J. Moulder, W. Stickle, P. Sobol and K. Bomben, Handbook of X-ray Photoelectron Spectroscopy, Perkin-Elmer, Eden Prairie, MN, 1992.
15. S. Shabalovskaya, J. Anderegg, F. Laabs, P. Thiel and G. Rondelli, Surface conditions of Nitinol wires and as-cast alloys. The effect of chemical etching, aging in boiling water and heat treatment, J. Biomed. Mater. Res. 65B (2003), 193-203.
16. F. Sunderman, M. Crisostomo, M. Reid, S. Hopfer and S. Namoto, Rapid analysis of Ni in serum and whole blood by electrothermal atomic absorption spectrophotometry, Ann. Clin. Lab. Sci. 14 (1984), 232-240.
17. P. Rocher, L. El Medawar, J. Hornez, M. Traisnel, J. Breme and H. Hilderbrand, Biocorrosion and cytocompatibility of NiTi shape memory alloys, Scripta Mater. 50 (2004), 255-260.
18. S. Takemoto, M. Hattori, M. Yoshinari, E. Kawada and Y. Oda, Corrosion behavior and surface characterization of titanium in solution containing fluoride and albumin, Biomaterials 26 (2005), 829-837.
19. C. Liang, H. Guo and B. Chen, Electrochemical behavior of Ti-Ni shape memory alloy in fibrinogen solution, Trans. Nonferrous. Met. Soc. China 14 (2004), 33-36.
20. S. Shabalovskaya, K. Hauch, J. Wataha, J. Anderegg, J. Cunnick and P. Poncet, Effects of surface chemistry on biocompatibility of NiTi, in: Proc. of the International Conference on Shape Memory and Superelastic Technologies, 3-7 Oct 2004, Baden-Baden, Germany, 2004, pp. 367-373.
21. J. Voros, M. Wieland, L. Ruiz-Taylor, M. Textor and D. Brunette, Characterization of titanium surfaces, in: Titanium in Medicine, D. Brunette et al., eds, Springer, Berlin, 2001, pp. 87-145.
22. 2 surfaces, J. Lab. Clin. Med. 129 (1997), 35-46.
23. P. Schmutz, G. Frankel and F. Serry, Corrosion studies with AFM, Part 1: Characterization of potential inhomogeneities on passive surfaces by Surface Potential Imaging, Veeco Instruments Inc., 2005, n5, AN87-91.
24. H. Nan, Y. Ping, C. Xuan, L. Yongxang, Z. Xiaolan, C. Guangjun, Z. Zihong, Z. Feng, C. Yuanru, L. Xianghuai and X. Tingfei, Blood compatibility of amorphous titanium oxide films synthesized by ion beam enhanced deposition, Biomaterials 19 (1998), 771-776.
25. M. Lucassen and B. Sarkar, Nickell-binding constituents of human blood serum, J. Toxic Environ. Health 5 (1997), 897-905.
26. P. Sawyer, The effect of various metal interfaces on blood and other living cells, Ann. N.Y. Acad. Sci. 146 (1968), 49-65.
27. J. Galante, J. Lemons, M. Spector, P. Wilson and T. Wright, The biological effect of implant materials, J. Orthop. Res. 9 (1991), 760-775.
28. E. Evans, Cell damage in vitro following direct contact with fine particles of titanium, titanium alloy and cobalt-chrome-molybdenum alloy, Biomaterials 15 (1994), 713-717.
29. R. Kawazawa, F. Watari, N. Takashi, Y. Tanimura, U. Motohiro and Y. Totsuka, Effect of Ti ions and particles on neutrophil function and morphology, Biomaterials 23 (2002), 3757-3764.
30. A. Cragg, S. Jong, W. Barnhart and S. Landas, Nitinol intravascular stent: results of preclinical evaluation, Radiology 189 (1993), 775-778.
31. C. Heintz, G. Riepe, L. Birken, E. Kaiser, N. Chakfe, M. Morlock, G. Delling and H. Imig, Corroded Nitinol wires in explanted aortic endografts: An important mechanism or failure?, J. Endovasc. Ther. 8 (2001), 248-253.