Two-step procedure for identification of metal behavior from dynamic compression tests

International Journal of Impact Engineering

Volumn 34, Issue 7, 2007, Pages 1163-1184

  Diot, S ^a   Guines, D ^a   Gavrus, A ^a   Ragneau, E ^a  

^a LGCGM   (France)

Author keywords

Compression; Dynamic; Finite element; Forming process; Inverse analysis

Indexed keywords

COMPACTION; FORMING; MATHEMATICAL MODELS; PARAMETER ESTIMATION; RHEOLOGY;

FORMING PROCESS; INVERSE ANALYSIS; UNIAXIAL COMPRESSIVE TESTS;

METAL ANALYSIS;

EID: 37849185896     PISSN: 0734743X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijimpeng.2006.07.003     Document Type: Article

References (34)

1. Langrand B., Geoffroy P., Petitniot J., Fabis J., Markiewicz E., and Drazetic P. Identification technique of constitutive model parameters for crashworthiness modelling. Aerospace Sci Technol 4 (1999) 215-227
2. Cabrera J., Prado J., and Barron M. An inverse analysis of the hot uniaxial compression test by the means of the finite element method. Steel Res 70 (1999) 59-66
3. Zhao H. Analyse de 1'essai aux banes d'Hopkinson - application à la mesure du comportement dynamique des matériaux, PhD thesis, Ecole Nationale des Ponts et Chaussées, 1992.
4. Klepaczko J. Recent progress in testing materials in impact shearing. In: ASME/ISME conference on pressure vessels and piping, vol. 300, ASME/ISME conference on pressure vessels and piping, 1995. p. 165-73.
5. Hamdi R. Comportement quasi-statique et dynamique des aciers pour frappe et forge à froid, PhD thesis, Université de Technologic de Compiègne, 1997.
6. Langrand B, Bos F, Drazetic P, Markiewicz E, Geoffroy P, Petitniot J. Identification paramétrique des lois de comportement de 1'Acier XC48 en compression. evolution vers une méthode inverse, Mécanique Industrielle et Matériaux 49 (2).
7. Haugou G, Fabis J, Langrand B, Deletombe E. Mise en ceuvre d'une méthode originale pour 1'Identification des modes propres et la conception d'un montage d'essais dynamiques. In: Proceedings of the international conference on multidisciplinary design in engineering, CSME-MDE 2001, Montréal, Canada, 2001.
8. Kopp R., Luce R., Leisten B., Wolske M., Tschirnich M., et al. Flow stress measuring by use of cylindrical compression test and special application to metal forming processes. Steel Res 72 10 (2001) 394-401
9. Haugou G., Fabis F., Langrand B., Deletombe E., and Markiewicz E. Iterative experimental/numerical procedure for improvement of dynamic experimental facilities. Struct Under Shock Impact 7 (2002) 113-122
10. Diot S, Gavrus A, Guines D, Ragneau E. Identification of a forging steel behavior from dynamic compression tests. In: Proceedings of the 15th ASCE engineering mechanics conference, EM2002, Columbia University, New York, USA, 2002.
11. Huang C., Lai J., and Lee C. Deformation characteristics of Ti-24Al-14Nb-3V-0.5Mo alloy during hot compression. J Mater Process Technol 73 1-3 (2000) 119-124
12. 3Al. Mater Sci Eng 1-2 258 (1998) 243-248
13. Diot S. Caractérisation expérimentale et numérique du comportement dynamique des matériaux. PhD thesis, Institut National des Sciences Appliquées de Rennes, November 2003.
14. Diot S, Gavrus A, Guines D, Ragneau E. Influence des phénomènes dynamiques sur 1'identification de paramétres rhéologiques en compression rapide, 16éme Congrès Français de Mécanique, CFM 2003, Nice, France.
15. CAST3M, Commissariat À 1'Energie Atomique, DEN-DM2S-SEMT-LM2S CEA-Saclay, 91191 Gif sur Yvette Cedex, France.
16. Lei W., Yao M., and Chen B. Quantitative description of temperature and strain rate dependence of yield strength of structural steels. Eng Fract Mech 53 4 (1996) 643-663
17. Majta J., Zurek A., Trujillo C., and Bator A. Study of high strain rate plastic deformation of low carbon microalloyed steels using experimental observation and computational modelling. J Phys 4 110 (2003) 117-122
18. Lee W.S., and Liu C.Y. The effects of temperature and strain rate on the dynamic flow behaviour of different steels. Mater Sci Eng A 426 (2006) 101-113
19. Serajzadeh S., and Karimi Taheri A. An investigation on the effect of carbon and silicon on flow behaviour of steel. Mater Des 23 (2002) 271-276
20. Liang R., and Khan A. A critical review of experimental results and constitutive models for BBC and FCC metals over a wide range of strains rates and temperatures. Int J Plasticity 15 (1999) 963-980
21. Homquist T., and Johnson G. Determination of constants and comparison of results for various constitutive models. J Phys IV 1 8 (1991) 853-860
22. Meyer L., Seifert K., and Malek S.A. Behavior of quenched and tempered steels under high strain rate compression loading. J Phys IV 7 8 (1997) 571-576
23. Zerilli F., and Armstrong R. Dislocation-mechanics-based constitutive relations for material dynamics calculation. J Appl Phys 61 5 (1987) 1816-1823
24. Valentin T, Magain P, Quik M, Labibes K, Albertini C. Validation of constitutive equations for steel. J Phys IV.
25. Johnson G, Cook W. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th international symposium on ballistics, Hague.
26. Kang W., Cho S., Huh H., and Chung D. Modified Johnson-Cook model for vehicle body crashworthiness simulation. Int J Vehicle Des 21 4/5 (1999) 424-435
27. Gavrus A. Identification automatique des parametres rheologiques par analyse inverse. Thèse de docteur en sciences et génie des matériaux, Ecole Nationale des Mines de Paris, CEMEF, Sophia Antipolis, 1996.
28. Voce H. A practical strain-hardening function. Acta Metall 51 (1948) 219-226
29. FORGE2, Centre de mise en forme de materiaux CEMEF, transvalor s.a., BO37, Sophia-Antipolis, France.
30. Negro TD. Inverse technique for automatic identification of rheological parameters in combined tension-torsion and compression. In: Proceedings of the ESAFORM 2001, 2001. p. 419-22.
31. Szyndler D, Pietrzyk M. Estimation of rheological and friction parameters in hot forming processes as inverse problem. In: Proceedings of the ESAFORM 2001, 2001. p. 191-4.
32. Kajberg J., and Lindkvist G. Characterization of materials subjected to large strains by inverse modelling based on in-plane displacement fields. Int J Solids Struct 41 (2004) 3439-3459
33. Kajberg J., Sundin K., Melin L., and Stahle P. High strain-rate tensile testing and viscoplastic parameter identification using microscopic high-speed photography. Int J Plasticity (2004) 561-575
34. Gavrus A., Ragneau E., and Caestecker P. Analysis of a rheological constitutive law for solid metallic materials available to simulate dynamic forming processes. Int J Form Process 6 1 (2003) 33-52