On the corrosion behaviour of phosphoric irons in simulated concrete pore solution

Corrosion Science

Volumn 50, Issue 1, 2008, Pages 131-143

  Sahoo, Gadadhar ^a   Balasubramaniam, R ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

A. Steel reinforced concrete; B. EIS; C. Passive film; D. Phosphoric irons; Polarization; Pourbaix diagram; Steel

Indexed keywords

COMPUTER SIMULATION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; POLARIZATION; STEEL;

PASSIVE FILMS; PHOSPHORIC IRONS; POURBAIX DIAGRAM; STEEL REINFORCED CONCRETE;

CORROSION;

COMPUTER SIMULATION; CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; POLARIZATION; STEEL;

EID: 37549039514     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2007.06.017     Document Type: Article

References (43)

1. Balasubramaniam R. On the corrosion resistance of the Delhi Iron Pillar. Corros. Sci. 42 (2000) 2103-2129
2. Balasubramaniam R., and Ramesh Kumar A.V. Characterization of Delhi Iron Pillar rust by X-ray diffraction, Fourier infrared spectroscopy and Mössbauer spectroscopy. Corros. Sci. 42 (2000) 2085-2101
3. Hopkins B.E., and Tipler H.R. The effect of phosphorus on the tensile and notch-impact properties of high-purity iron and iron-carbon alloys. J. Iron Steel Inst. 188 (1958) 218-237
4. Stewart J.W., Charles J.A., and Wallach E.R. Iron-phosphorus-carbon system Part 1 - Mechanical properties of low carbon Fe-P alloys. Mater. Sci. Technol. 16 (2000) 283-290
5. Sahoo G., and Balasubramaniam R. Mechanical behaviour of phosphoric irons for concrete reinforcement applications. Scripta Mater. 56 (2007) 117-120
6. G. Sahoo, R. Balasubramaniam, On phase distribution and phase transformations in phosphoric irons studied by metallography, Metall. Mater. Trans. A, in press.
7. G. Sahoo, Corrosion of Novel Phosphoric Irons for Concrete Reinforcement Applications, PhD Thesis, Indian Institute of Technology, Kanpur, India, 2006.
8. Cramer S.D., Covino B.S., Bullanrd S.J., Holcomb G.R., Russell J.H., Zimolek-moroz M., Voramo Y.P., Bulter J.T., Nelson F.J., and Thompson N.G. Prevention of chloride-induced corrosion damage to bridges. ISIJ Int. 42 (2002) 1376-1385
9. R. Balasubramaniam, Delhi Iron Pillar: New Insight, Indian Institute of Advanced Studies and Aryan Books International, New Delhi, Shimla, 2002, pp. 138-139.
10. Hope B.B., and Ip A.K.C. Chloride corrosion threshold in concrete. ACI Mater. J. 84 (1987) 306-314
11. Bertolini L., Elsener B., Pedeferri P., and Polder R. Corrosion of Steel in Concrete (2004), Wiley-VCH Verlag GmbH & Co., Weinheim, Germany
12. Hoar T.P. The production and breakdown of the passivity of metals. Corros. Sci. 7 (1967) 341-355
13. Janikczachor M., Szummer A., and Szlarskasmialowska Z. Electron-microprobe investigation of processes leading to nucleation of pits on iron. Corros. Sci. 15 (1975) 775-778
14. David T., and Paulo J.M. Corrosion performance of conventional (ASTM A615) and low-alloy (ASTM A706) reinforcing bars embedded in concrete and exposed to chloride environments. Cement Concrete Res. 35 (2005) 562-571
15. 3 - distribution in concrete slabs ponded by corrosion-inhibitor-added deicing salts. Adv. Cem. Based Mater. 8 (1998) 101-107
16. Hara S., Miura M., Uchiumi Y., Fujiwara T., and Yamamoto M. Suppression of deicing salt corrosion of weathering steel bridges by washing. Corros. Sci. 47 (2005) 2419-2430
17. Jone D.A. Principles and Prevention of Corrosion (1992), Macmillan Publishing Company, New York pp. 145-148
18. Alonso C., Andrade C., Castellote M., and Castro P. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar. Cement Concrete Res. 30 (2000) 1047-1055
19. Andrade M.C., Castelo V., Alonso C., and Gonzalez J.A. ASTM STP 906 (1986), American Society of Testing and Materials, Philadelphia pp. 43
20. Andrade C., and Alonso J. Corrosion rate monitoring in the laboratory and on site. Constr. Build. Mater. 10 (1996) 315-328
21. Grace P., Andrade M.C., SaeZ A., and Alonso M.C. Corrosion of reinforcing steel in neutral and acid solutions simulating the electrolytic environments in the micropores of concrete in the propagation period. Corros. Sci. 47 (2005) 289-306
22. Moreno M., Morris W., Alvarez M.G., and Duffo G.S. Corrosion of reinforcing steel in simulated concrete pore solutions, Effect of carbonation and chloride content. Corros. Sci. 46 (2004) 2681-2699
23. MacDougall B., and Graham M.J. Growth and stability of passive films. In: Marcus P. (Ed). Corrosion Mechanism in Theory and Practice (1995), Marcel Dekker, New York 199-201
24. Kelly R.G., Scully J.R., Shoesmith D.W., and Buchheit R.G. Electrochemical Techniques in Corrosion Science and Engineering (2003), Marcel Dekker, New York pp. 73-87
25. Rodriguez P., Ramirez E., and Gonzalez J.A. Methods for studying corrosion in reinforced concrete. Mag. Concrete Res. 46 (1994) 81-90
26. Keddam M., Krarti M., and Pallotta C. Some aspects of the fluctuations of the passive current on stainless steel in presence of chlorides - their relation to the probabilistic approach of pitting corrosion. Corrosion 43 (1987) 454-458
27. Walter G.W. A review of impedance plot methods used for corrosion performance analysis of painted metals. Corros. Sci. 26 (1986) 681-703
28. Mansfeld F., Wang V., and Shih H. Development of stainless aluminum. J. Electrochem. Soc. 138 (1991) L74-L75
29. Seremi M., and Mahallati E. A Study on chloride-induced depassivation of mild steel in simulated concrete pore solution. Cement Concrete Res. 32 (2002) 1915-1921
30. Poupard O., Ait-Mokhtar A., and Dumargue P. Corrosion by chlorides in reinforced concrete: determination of chloride concentration threshold by impedance spectroscopy. Cement Concrete Res. 34 (2004) 991-1000
31. Sugimoto K., and Sawada Y. An X-ray photo-electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HCl. Corros. Sci. 19 (1977) 3-14
32. Cai M., and Park S.M. Oxidation of zinc in alkaline solutions studied by electrochemical impedance spectroscopy. J. Electrochem. Soc. 143 (1996) 3895-3902
33. Cox B., and Wong Y.M. Simulating porous oxide films on zirconium alloys. J. Nucl. Mater. 218 (1995) 324-334
34. Abreu C., Cristóbal M., Losada R., Nóvoa X., Pena G., and Perez M. Comparative study of passive films of different stainless steels developed on alkaline medium. Electrochim. Acta 49 (2004) 3049-3056
35. Hamadou L., Kadri A., and Benbrahim N. Characterisation of passive films formed on low carbon steel in borate buffer solution (pH 9.2) by electrochemical impedance spectroscopy. Appl. Surf. Sci. 252 (2005) 1510-1519
36. Van Muylder J., and Pourbaix M. Establishment and Interpretation of Potential-pH Equilibrium Diagram of P. first ed. Atlas of Electrochemical Equilibria in Aqueous Solutions (1966), Pergamon Press, Cebelcor Brussels 504-517
37. Genin J.M., Dhouibi L., Refait Ph., Abdelmoula M., and Triki E. Influence of phosphate on corrosion products of iron in chloride-polluted-concrete-simulating solutions: ferrihydrite vs green rust. Corrosion 58 (2002) 467-478
38. Awad G.H., and Hoar T.P. Role of phosphates in inhibiting pitting of commercial mild steel in chloride-containing media. Corros. Sci. 15 (1975) 581-588
39. Li W.S., Cai S.Q., and Luob J.L. Chronopotentiometric responses and capacitance behaviours of passive film formed on iron in borate buffer solution. J. Electrochem. Soc. 151 (2004) B220-B226
40. Misawa T., Kyuno T., Suetaka W., and Shimodaira S. The mechanism of atmospheric rusting and the effect of Cu and P on the rust formation of low alloy steels. Corros. Sci. 11 (1971) 35-48
41. Virtanen S., Elsener B., and Bohni H. J. Less-Common Metals 145 (1988) 581-593
42. Nishimura R., Kudo K., and Sato N. J. Jpn. Inst. Met. 45 (1981) 581
43. Nishimura R., Asaki M., and Kudo K. Corrosion 40 (1984) 465