Comparison of predicted and measured turbine vane rough surface heat transfer

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 2000, Pages

  Boyle, R J ^a   Spuckler, C M ^a   Lucci, B L ^a  

^a NASA GLENN RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALGEBRA; COAL FUELED GAS TURBINES; HEAT TRANSFER; NAVIER STOKES EQUATIONS; REYNOLDS NUMBER; SURFACE MEASUREMENT; TURBINE COMPONENTS; TURBINES; TURBOMACHINERY; TURBULENCE MODELS;

ALGEBRAIC MODELING; FREESTREAM TURBULENCE; FREESTREAM TURBULENCE INTENSITY; HEAT TRANSFER PREDICTIONS; HIGH REYNOLDS NUMBER; K-OMEGA TURBULENCE MODEL; LOW REYNOLDS NUMBER; ROUGHNESS MODELS;

SURFACE ROUGHNESS;

EID: 37549029535     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/2000-GT-0217     Document Type: Conference Paper

References (27)

1. Abuaf, N., Bunker, R.S., and Lee, C.P., 1997, "Effects of Surface Roughness on Heat Transfer and Aerodynamic Performance of Turbine Airfoils," ASME paper 97-GT-10.
2. Arnone, A., Liou, M.-S., and Povinelli, L.A., 1992, "Navier-Stokes Solution of Transonic Cascade Flows Using Non-Periodic C-Type Grids," AIAA Journal of Propulsion and Power, Vol. 8, No. 2, pp. 410-417.
3. Baldwin, B.S., and Lomax, H., 1978, "Thin-Layer Approximation and Algebraic Model for Separated Turbulent Flows," AIAA paper 78-257.
4. Bammert, K., and Stanstede, H., 1972, "Measurements Concerning the Inuence of Surface Roughness and Profile Changes on the Performance of Gas Turbines," ASME Journal of Engineering for Power, Vol. 94, pp. 207-213.
5. Bammert, K., and Stanstede, H., 1976, "Inuences of Manufacturing Tolerances and Surface Roughness of Blades on the Performance of Turbines," ASME Journal of Engineering for Power, Vol. 98, pp. 29-36.
6. Blair, M.F., 1994, "An Experimental Study of Heat Transfer in a Large-Scale Turbine Rotor Passage," ASME Journal of Turbomachinery, Vol. 116, pp. 1-13.
7. Boyle, R.J., Spuckler, C.M., Lucci, B.L., and Camperchioli, W.P., 2000, "Infrared Low Temperature Turbine Vane Rough Surface Heat Transfer Measurements," Proposed for presentation at the 45th ASME Gas Turbine and Aeroengine Technical Congress as paper 00-GT-0216.
8. Boyle, R.J., Lucci, B.L., Verhoff, V.G., Camperchioli, W.P., and La, H., 1998, "Aerodynamics of a Transitioning Turbine Stator Over a Range of Reynolds Numbers," ASME paper 98-GT-285.
9. Boyle, R.J., and Civinskas, K.C., 1991, "Two-Dimensional Navier-Stokes Heat Transfer Analysis for Rough Turbine Blades," AIAA paper AIAA-91-2129.
10. Boynton, J.L., Tabibzadeh, R., and Hudson, S.T., 1992, "Investigation of Rotor Blade Roughness Effects on Turbine Performance," ASME Journal of Turbomachinery, Vol. 115, pp. 614-620.
11. Cebeci, T., and Chang, K.C., 1978, "Calculation of Incompressible Rough-Wall Boundary-Layer Flows," AIAA Journal, Vol. 16, No. 7, pp 730-735.
12. Chima, R.V., 1987 \Explicit Multigrid Algorithm for Quasi-Three-Dimensional Flows in Turbomachinery." AIAA Journal of Propulsion and Power, Vol. 3, No. 5, pp. 397-405.
13. Chima, R.V., and Yokota, J.W., 1988, "Numerical Analysis of Three-Dimensional Viscous Internal Flows," AIAA paper 88-3522, (NASA TM-100878).
14. Chima, R.V., Giel, P.W., and Boyle, R.J., 1993, "An Algebraic Turbulence Model for Three-Dimensional Viscous Flows," AIAA paper 93-0083, (NASA TM-105931).
15. Chima, R.V., 1996, "Application of the k-w Turbulence Model to Quasi-Three-Dimensional Turbomachinery Flows," AIAA Journal of Propulsion and Power, Vol. 12, No. 6, pp. 1176-1179.
16. Dagnall, H., 1986, "Exploring Surface Texture," Second ed., Rank Taylor Hobson Limited, Leicester, England, p 158.
17. Dirling, R.B., 1973, "A Method for Computing Roughwall Heat Transfer Rates on Re-Entry Nosetips," AIAA paper 73-763
18. Dunn, M.G., Kim, J., Civinskas, K.C., and Boyle, R.J., 1994, "Time-Averaged Heat Transfer and Pressure Measurements and Comparison with Prediction for a Two-Stage Turbine. ASME Journal of Turbomachinery, Vol. 116, pp. 14-22.
19. Dvorak, F.A., 1969, "Calculation of Turbulent Boundary Layers on Rough Surfaces in Pressure Gradient," AIAA Journal, Vol. 7, No. 9, pp 1752-1759.
20. Kind, R.J., Serjak, P.J., and Abbott, M.W.P., 1998, "Measurements and Prediction of the Effects of Surface Roughness on Profile Losses and Deviation in a Turbine Cascade," ASME Journal of Turbomachinery, Vol. 120, pp. 20-27.
21. Sigal, A., and Danberg, J.E., 1990, "New Correlation of Roughness Density Effect on the Turbulent Boundary Layer," AIAA Journal, Vol. 28, No. 3, pp 554-556.
22. Tarada, F., 1990, "Prediction of Rough Wall Boundary Layers Using a Low Reynolds Number k-w Turbulence Model," Int. J. of Heat and Fluid Flow, Vol. 11, pp 331-345.
23. Tarada, F., and Suzuki, M., 1993, "External Heat Transfer Enhancement to Turbine Blading Due to Surface Roughness," ASME paper 93-GT-74.
24. Taylor, R.P., Coleman, H.W., and Hodge, B.K., 1985, "Prediction of Turbulent Rough-Wall Skin Friction Using a Discrete Element Approach," ASME Journal of Fluids Engineering, Vol. 107 pp 251-257.
25. Tolpadi, A.K, and Crawford, M.E., 1998, "Predictions of the Effect of Roughness on Heat Transfer From Turbine Airfoils," ASME paper 98-GT-087.
26. Waigh, D.R., and Kind, R.J., 1998, "Improved Aerodynamic Characterization of Regular Three-Dimensional Roughness," AIAA Journal, Vol. 36, No. 6, pp 1117-1119.
27. Wilcox, D.C., 1994, Turbulence Modeling for CFD, DCW Industries, Inc., La Canada, CA.