The influence of Er:YAG laser conditioning versus self-etching adhesives with acid etching on the shear bond strength of orthodontic brackets

Photomedicine and Laser Surgery

Volumn 25, Issue 6, 2007, Pages 508-512

  Gokcelik, Aylin ^a   Ozel, Yonca ^a   Ozel, Emre ^a   Arhun, Neslihan ^a   Attar, Nuray ^b   Firatli, Sonmez ^c   Firatli, Erhan ^c  

^a BASKENT UNIVERSITY   (Turkey)

^b HACETTEPE UNIVERSITY   (Turkey)

^c ISTANBUL UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVES; CHEMICAL BONDS; DENTISTRY; LASER ABLATION; PHOSPHORIC ACID; SHEAR STRENGTH;

ADHESIVE REMNANT INDEX (ARI); ORTHODONTIC BRACKETS; SELF-ETCHING PRIMER; TRANSBOND XT ADHESIVE PASTE;

SOLID STATE LASERS;

ACID; ADHESIVE AGENT; PHOSPHORIC ACID;

ARTICLE; COMPARATIVE STUDY; ERBIUM YAG LASER; EVALUATION; HUMAN; ORTHODONTIC DEVICE; PREMOLAR TOOTH; SCORING SYSTEM; SHEAR STRENGTH; STEREOMICROSCOPY;

ACID ETCHING, DENTAL; DENTAL BONDING; HUMANS; LASER THERAPY; ORTHODONTIC BRACKETS; RESIN CEMENTS; SHEAR STRENGTH;

EID: 37549007121     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2007.2096     Document Type: Article

References (46)

1. Buonocore, M.G. (1955). A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J. Dent. Res. 34, 849-853.
2. Bishara, S.E., Laffoon, J.F., Vonwald, L., and Warren, J.J. (2002). The effect of repeated bonding on the shear bond strength of different orthodontic adhesives. Am. J. Orthod. Dentofacial Orthop. 121, 521-525.
3. Thanos, C.E., Munholland, T., and Caputo, A.A. (1979). Adhesion of mesh base direct bonding brackets. Am. J. Orthod. 75, 421-430.
4. Miyasaki, M., and Hirohata, N. (1999). Influence of self-etching primer drying time on enamel bond strength of resin composites. J. Dent. 27, 203-207.
5. Yamada, R., Hayakawa, T., and Kasai K. (2002). Effect of using self-etching primer for bonding orthodontic brackets. Angle Orthod. 72, 558-564.
6. Hosein, I., Sherriff, M., and Ireland, A.J. (2004). Enamel loss during bonding, debonding, and cleanup with use of a self-etching primer. Am. J. Orthod. Dentofacial Orthop. 126, 717-724.
7. Miller, R.A. (2001). Laboratory and clinical evaluation of a self-etch primer. J. Clin. Orthod. 35, 42-45.
8. Maiman, T.H. (1960). Stimulated optical radiation in ruby. Nature. 187, 493-494.
9. Goldman, L., Gray, J.A., Goldman, J,. Goldman, B., and Meyer, R. (1965). Effect of laser beam impacts on teeth. J. Am. Dent. Assoc. 70, 601-606.
10. 3+ ions in yttrium aluminum garnet crystals at γ 2.94 μm. Soviet J. Quantum Electron. 4, 1039-1040.
11. Sakakibara, Y., Ishimaru, K., and Takamizu, M. (1998). A study on bond strength to dentin irradiated be Erbium:YAG laser. Jpn. J. Conservative Dent. 44, 207-219.
12. 2 laser: study of thermal and acoustic effects. Lasers Surg. Med. 12, 79-85.
13. Usumez, S., Orhan, M., and Usumez, A. (2002). Laser etching of enamel for direct bonding with an Er,Cr:YSGG hydrokinetic laser system. Am. J. Orthod. Dentofacial Orthop. 122, 649-656.
14. Visuri, S.R., Gilbert, J.L., Wright, D.D., Wigdor, H.A., and Walsh, J.T. Jr. (1996). Shear strengths of composite bonded to Er:YAG laser prepared dentin. J. Dent. Res. 75, 599-605.
15. Klein, A.L., Rodrigues, L.K., Eduardo, C.P., Nobre dos Santos, M., and Cury, J.A. (2005). Caries inhibition around composite restorations by pulsed carbon dioxide laser application. Eur. J. Oral Sci. 113, 239-244.
16. Maijer, R., and Smith, D.C. (1979). A new surface treatment for bonding. J. Biomed. Mater. Res. 13, 975-985.
17. Oho, T., and Morioka, T. (1990). A possible mechanism of acquired acid resistance of human dental enamel by laser irradiation. Caries Res. 24, 86-92.
18. Basaran, G., Özer, T., Berk, N., and Hamamc(, O. (2007). Etching enamel for orthodontics with an erbium, chromium:yttrium-scandium-gallium-garnet laser system. Angle Orthod. 77, 117-124.
19. Eminkahyagil, N., Korkmaz, Y., Gokalp, S., and Baseren, M. (2005). Shear bond strength of orthodontic brackets with newly developed antibacterial self etch adhesive. Angle Orthod. 75, 843-848.
20. Shammaa, I., Ngan, P., Kim, H., et al. (1999). Comparison of bracket debonding force between two conventional resin adhesives and resin-reinforced glass ionomer cement: an in vitro and in vivo study. Angle Orthod. 69, 463-469.
21. Barkmeier, W.W., and Erickson, R.L. (1994). Shear bond strength of composite to enamel and dentin using Scotchbond multi-purpose. Am. J. Dent. 7, 175-179.
22. Boyd, R.L. (1993). Comparison of three self-applied topical fluoride preparations for control of decalcification. Angle Orthod. 63, 25-30.
23. Ogaard, B., Rolla, G., and Arends, J. (1988). Orthodontic appliances and enamel demineralization. Part 1: lesion development. Am. J. Orthod. 94, 68-73.
24. Ogaard, B., Bishara, S.E., and Duschner, H. (2004). Enamel effects during bonding-debonding and treatment with fixed appliances, in: T.M. Graber, T. Eliades, and A.E. Athanasiu, (eds.). Risk Management in Orthodontics: Experts' Guide to Malpractice, 1st ed. Chicago: Quintessence Publishing, pp. 19-49.
25. Buyukyilmaz, T., Usumez, S., and Karaman, A.I. (2003). Effect of self-etching primers on bond strength - are they reliable? Angle Orthod. 73, 64-70.
26. Cacciafesta, V., Sfondrini, M.F., De Angelis, M., Scribante, A., and Klersy, C. (2003). Effect of water and saliva contamination on shear bond strength of brackets bonded with conventional, hydrophilic, and self-etching primers. Am. J. Orthod. Dentofacial Orthop. 123, 633-640.
27. Cal-Neto, J.P., Carvalho, F., Almeida, R.C., and Miquel, J.A. (2006). Evaluation of new self-etching primer on bracket bond strength in vitro. Angle Orthod. 76, 466-469.
28. Walsh, L.J., Abood, D., and Brockhurst, P.J. (1994). Bonding of composite resin to carbon dioxide laser-etched human enamel. Dent. Mater. 10, 162-166.
29. Hess, J.A. (1990). Scanning electron microscopic study of laser-induced morphologic changes of a coated enamel surface. Lasers Surg. Med. 10, 458-462.
30. Arcoria, C.J., Lippas, M.G., and Vitasek, B.A. (1993). Enamel surface roughness analysis after laser ablation and acid-etching. J. Oral Rehabil. 20, 213-224.
31. Retief, D.H. (1974). Failure at the dental adhesive-etched enamel interface. J. Oral Rehabil. 1, 265-284.
32. Hanning, M., and Reinhardt, K.J. (1999). Self-etching primer versus phosphoric acid: an alternative concept for composite-to-enamel bonding. Oper. Dent. 24, 172-180.
33. Arnold, R.W., Combe, E.C., and Warford, J.H. Jr. (2002). Bonding of stainless steel brackets to enamel with a new self-etching primer. Am. J. Orthod. Dentofacial Orthop. 122, 274-276.
34. Dorminey, J.C., Dunn, W.J., and Taloumis, L.J. (2003). Shear bond strength of orthodontic brackets bonded with a modified 1-step etchant-and-primer technique. Am. J. Orthod. Dentofacial Orthop. 124, 410-413.
35. Rajagopal, R., Padmanabhan, S., and Gnanamani, J. (2004). A comparison of shear bond strength and debonding characteristics of conventional, moisture-insensitive, and self-etching primers in vitro. Angle Orthod. 74, 264-268.
36. Bishara, S.E., Von Wald, L., Laffoon, J.F., and Warren, J.J. (2001). Effect of a self-etch primer/adhesive on the shear bond strength of orthodontic brackets. Am. J. Orthod. Dentofacial Orthop. 119, 621-624.
37. Corpas-Pastor, L., Villalba-Moreno, J., de Dios Lopez-Gonzalez Garrido, J., Pedraza Muriel, V., Moore, K., and Elias, A. (1997). Comparing the tensile strength of brackets adhered to laser-etched enamel vs. acid-etched enamel. J. Am. Dent. Assoc. 128, 732-737.
38. Kwon, Y.H., Kwon, O.W., Kim, H.I., and Kim, K.H. (2003). Nd:YAG laser ablation of enamel for orthodontic use: tensile bond strength and surface modification. Dent. Mater. J. 22, 397-403.
39. Lee, B.S., Hsieh, T.T., Lee, Y.L., et al. (2003). Bond strengths of orthodontic bracket after acid-etched, Er:YAG laser-irradiated and combined treatment on enamel surface. Angle Orthod. 73, 565-570.
40. Martinez-Insua, A., Da Silva Dominguez, L., Rivera, F.G., and Santana-Penin, U.A. (2000). Differences in bonding to acid-etched or Er:YAG-laser-treated enamel and dentin surfaces. J. Prosthet. Dent. 84, 280-288.
41. Littlewood, S.J., Mitchell, L., Greenwood, D.C., Bubb, N.L., and Wood, D.J. (2000). Investigation of a hydrophilic primer for orthodontic bonding: an in vitro study. J. Orthod. 27, 181-186.
42. Campbell, P.M. (1995). Enamel surface after orthodontic bracket debonding. Angle Orthod. 2, 103-110.
43. Vicente, A., Bravo, L.A., and Romero, M. (2005). Influence of a nonrinse conditioner on the bond strength of brackets bonded with a resin adhesive system. Angle Orthod. 75, 400-405.
44. Britton, J.C., Mclnnes, P., Weinberg, R., Ledoux, W.R., and Retief, D.H. (1990). Shear bond strength of ceramic orthodontic brackets to enamel. Am. J. Orthod. Dentofacial Orthop. 98, 348-353.
45. Bishara, S.E., Gordan, V.V., Von Wald, L., and Olson, M.E. (1998). Effect of an acidic primer on shear bond strength of orthodontic brackets. Am. J. Orthod. Dentofacial Orthop. 114, 243-247.
46. Romano, F.L., Tavares, S.W., Nouer, D.F., Consani, S., and Borges de Araujo Magnani, M.B. (2005). Shear bond strength of metallic orthodontic brackets bonded to enamel prepared with self-etching primer. Angle Orthod. 75, 849-853.