Green strength testing of pressed compacts: An analysis of the different methods

Journal of the European Ceramic Society

Volumn 28, Issue 4, 2008, Pages 701-710

  Amoros J L ^a   Cantavella, V ^a   Jarque, J C ^a   Feliu C ^a  

^a UNIVERSITAT JAUME I   (Spain)

Author keywords

Clays; Green strength; Pressing

Indexed keywords

COMPRESSIVE STRENGTH; FRACTURE; HOT PRESSING; MOISTURE; PLASTIC DEFORMATION; PLASTICITY; STRAIN; WEIBULL DISTRIBUTION;

FOUR-POINT BENDING TEST; GREEN PRESSED COMPACTS; THREE-POINT BENDING TEST;

CERAMIC MATERIALS;

CERAMIC MATERIALS; COMPRESSIVE STRENGTH; FRACTURE; HOT PRESSING; MOISTURE; PLASTIC DEFORMATION; PLASTICITY; STRAIN; WEIBULL DISTRIBUTION;

EID: 37549004814     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2007.09.040     Document Type: Article

References (45)

1. Carneim T.J., and Green D.J. Mechanical properties of dry-pressed alumina green bodies. J. Am. Ceram. Soc. 84 7 (2001) 1405-1410
2. Kendall K. Influence of powder structure on processing and properties of advanced ceramics. Powder Technol. 58 (1989) 151-161
3. Hsieh H., and Fang T. Effect of green states on sintering behavior and microstructural evolution of high-purity barium titanate. J. Am. Ceram. Soc. 73 6 (1990) 1566-1573
4. Shinohara N., Okumiya M., Hotta T., Nakahira K., Naito M., and Uematsu K. Formation mechanisms of processing defects and their relevance to the strength in alumina ceramics made by powder compaction process. J. Mater. Sci. 34 (1999) 4271-4277
5. Zheng J., and Reed J.S. Effect of particle packing characteristics on solid state sintering. J. Am. Ceram. Soc. 72 5 (1989) 810-817
6. Kendall K., Alford N.McN., and Birchall J.D. The strength of green bodies. Brit. Ceram. Proc. 8 (1986) 255-265
7. Carneiro F.L.L.B., and Barcellos A. Tensile strength of concretes. Bulletin RILEM 13 (1953) 97-107
8. Akazawa T. Methode pour l'essai de traction des betons. Bulletin RILEM 16 (1953) 12-23
9. Wright P.J.F. Comments on an indirect tensile test on concrete cylinders. Mag. Concrete Res. (1955) 87-96
10. Nova R., and Zaninetti A. An investigation into the tensile behavior of a schistose rock. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 27 (1990) 231-242
11. Chen C.S., Pan E., and Amadei B. Determination of deformability and tensile strength of anisotropic rock using Brazilian tests. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 35 (1998) 43-61
12. Shaw M.C., Braiden P.M., and DeSalvo G.J. The disc test for brittle materials. Trans. ASME 96 (1975) 77
13. Marion H., and Johnstone J. A Parametric study of the diametral compression test for ceramics. Ceram. Bull. 56 11 (1977) 998-1002
14. Takagi J., and Shaw M.C. Evaluation of fracture strength of brittle tools. Ann. CIRP 30 1 (1981) 53-57
15. Ovri J.E.O., and Davies T.J. Diametral compression of silicon nitride. Mater. Sci. Eng. 96 (1987) 109-116
16. Bonollo F., Molinas B., Tangerini I., and Zambon A. Diametral compression testing of metal matrix composites. Mater. Sci. Technol. 10 6 (1994) 558-564
17. Ehrnford L. Stress distribution in diametral compression tests. Acta Odomol. Scand. 39 (1981) 55-60
18. Ehrnford L. A fracture study of the diametral compression test by means of high-speed photography. Acta Odontol. Scand. 39 (1981) 71-77
19. Ehrnford L. The connection between load distribution and fracture load in the diametral compression test. Exp. Study Sweden Dent. J. 4 (1980) 201-212
20. Stanley P. Mechanical strength testing of compacted powders. Int. J. Pharm. 227 (2001) 27-38
21. Amin M.C.I., and Fell J.T. Tensile strength and bonding in compacts: a comparison of diametral compression and three-point bending for plastically deforming materials. C.I Amin. Drug Develop. Ind. Pharm. 28 7 (2002) 809-813
22. Procopio A.T., Zavaliangos A., and Cunningham J.C. Analysis of the diametrical compression test and the applicability to plastically deforming materials. J. Mater. Sci. 38 (2003) 3629-3639
23. Wynnyckyj J.K. The correlation between the strength factor and the true tensile strength of agglomerate spheres. Can. J. Chem. Eng. 63 8 (1985) 591-597
24. Galen S., and Zavaliangos A. Strength anisotropy in cold compacted ductile and brittle powders. Acta Mater. 53 (2005) 4801-4815
25. Rudnick A., Hunter A.R., and Holden F.C. An analysis of the diametral-compression test. Mater. Res. Stand. 4 5 (1964) 218-220
26. Darvell B.W. Uniaxial compression tests and the validity of indirect tensile strength. J. Mater. Sci. 25 (1990) 757-780
27. Brewer J.A., Moore R.H., and Reed J.S. Effect of relative humidity on the compaction of barium titanate and manganese zinc ferrite agglomerates containing polyvinyl alcohol. Ceram. Bull. 60 2 (1981) 212-216
28. Walker W.J., and Reed J.S. Green testing of pressed compacts. Ceram. Eng. Sci. Proc. 14 11-12 (1993) 43-57
29. Baklouti S., Chartier T., and Baumard J.F. Mechanical properties of dry-pressed ceramic green products: the effect of the binder. J. Am. Ceram. Soc. 80 8 (1997) 1992-1996
30. Uppalapati M., and Green D.J. Effect of external lubricant on mechanical properties of dry-pressed green bodies. J. Am. Ceram. Soc. 88 6 (2005) 1397-1402
31. Lam D.C.C., and Kusakari K. Microstructure and mechanical properties relations for green bodies compacted from spray dried granules. J. Mater. Sci. 30 (1995) 5495-5501
32. Amorós J.L., Felíu C., and Agramunt J.V. Mechanical strength and microstructure of green ceramic bodies. Cer. Acta 8 6 (1996) 5-19
33. Amorós J.L., García J., Sánchez E., and García M.C. Composiciones para la Fabricación de Baldosas Cerámicas. Influencia de los Distintos Componentes sobre su Comportamiento en el Proceso de Fabricación. Cerámica Información 243 (1998) 37-43
34. Amorós J.L., Blasco A., Manfredini T., and Pozzi P. A new experimental method for measuring apparent density in ceramics: aspects of technique and applications. Ind. Ceram. 7 4 (1987) 200-204
35. Amorós J.L., Beltrán V., Negre F., and Escardino A. Estudio de la compactación de soportes cerámicos (Bizcochos) de pavimento y revestimiento. II. Influencia de la presión y humedad de prensado. Bol. Soc. Esp. Ceram. Vidr. 22 1 (1983) 9-18
36. Amorós J.L., Escardino A., Beltrán V., and Enrique J.E. Quality control in tile production. Interceram 33 2 (1984) 50-54
37. Fahad M.K. Stresses and failure in the diametral compression test. J. Mater. Sci. 31 (1996) 3723-3729
38. Amorós J.L., Sánchez E., Cantavella V., Jarque J.C., Monzó M., Timellini G., and Leak N. Effect of the drying cycle on dried tile mechanical strength. Key Eng. Mater. 206-213 (2002) 1663-1666
39. Amorós J.L., Sánchez E., Cantavella V., and Jarque J.C. Evolution of mechanical strength of industrially dried ceramic tiles during storage. J. Eur. Ceram. Soc. 23 (2003) 1839-1845
40. Davies D.G.S. The statistical approach to engineering design in ceramics. Proc. Br. Ceram. Soc. 22 (1973) 429-452
41. Quinn G.D. Weibull strength scaling for standardized rectangular flexure specimens. J. Am. Ceram. Soc. 86 3 (2003) 508-510
42. Swank L.R., Caverly J.C., and Allor R.L. Experimental errors in modulus of rupture test fixtures. Ceram. Eng. Sci. Proc. 11 9-11 (1990) 1329-1345
43. Amorós J.L., Orts M.J., Sanz V., and Escardino A. Prensado unidireccional de polvos cerámicos aglomerados por atomización. I. Mecanismo de compactación, Ciencia y Tecnología de los materiales cerámicos y vítreos. Faenza Editrice Iberica (1990) 133-137
44. Amorós J.L., Orts M.J., Monfort E., and Escardino A. Prensado unidireccional de polvos cerámicos aglomerados por atomización. II. Microestructura de la pieza en Crudo, Ciencia y Tecnología de los materiales cerámicos y vítreos. Faenza Editrice Iberica (1990) 139-144
45. Neergaard L.J., Neergaard D.A., and Neergaard M.S. Effective volume of speciments in diametral compression. J. Mater. Sci. 32 (1997) 2529-2533