Analysis of retrieved acetabular components of three polyethylene types

Clinical Orthopaedics and Related Research

Volumn 465, Issue , 2007, Pages 140-149

  Salineros, Matias J ^a   Crowninshield, Roy D ^b   Laurent, Michel ^b   Wimmer, Markus A ^b,c   Jacobs, Joshua J ^b  

^a HOSPITAL MILITAR DE SANTIAGO   (Chile)

^b RUSH MEDICAL COLLEGE   (United States)

^c RUSH UNIVERSITY MEDICAL CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

NITROGEN; POLYETHYLENE; CROSS LINKING REAGENT;

ACETABULUM; AIR; COMPARATIVE STUDY; CONFERENCE PAPER; CROSS LINKING; IMPLANT; IMPLANTATION; MATERIAL COATING; PRIORITY JOURNAL; SURFACE PROPERTY; TOTAL HIP PROSTHESIS; ADULT; AGED; ARTICLE; CHEMISTRY; DEVICE REMOVAL; EQUIPMENT; FEMALE; GAMMA RADIATION; HIP; HIP ARTHROPLASTY; HIP PROSTHESIS; HUMAN; INSTRUMENTATION; MALE; MECHANICAL STRESS; MIDDLE AGED; PATHOPHYSIOLOGY; PROSTHESIS; PROSTHESIS FAILURE; RADIATION EXPOSURE; TIME; TREATMENT OUTCOME; WEIGHT BEARING;

ACETABULUM; ADULT; AGED; AGED, 80 AND OVER; ARTHROPLASTY, REPLACEMENT, HIP; CROSS-LINKING REAGENTS; DEVICE REMOVAL; EQUIPMENT FAILURE ANALYSIS; FEMALE; GAMMA RAYS; HIP JOINT; HIP PROSTHESIS; HUMANS; MALE; MIDDLE AGED; POLYETHYLENE; PROSTHESIS DESIGN; PROSTHESIS FAILURE; STRESS, MECHANICAL; SURFACE PROPERTIES; TIME FACTORS; TREATMENT OUTCOME; WEIGHT-BEARING;

EID: 37349089798     PISSN: 0009921X     EISSN: 15281132     Source Type: Journal    
DOI: 10.1097/BLO.0b013e3181468930     Document Type: Conference Paper

References (66)

1. Affatato S, Bersaglia G, Rocchi M, Taddei P, Fagnano C, Toni A. Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions. Biomaterials. 2005;26:3259-3267.
2. Bourne RB, Barrack R, Rorabeck CH, Salehi A, Good V. Arthroplasty options for the young patient: oxinium on cross-linked polyethylene. Clin Orthop Relat Res. 2005;441:159-167.
3. Bradford L, Baker DA, Graham J, Chawan A, Ries MD, Pruitt LA. Wear and surface cracking in early retrieved highly cross-linked polyethylene acetabular liners. J Bone Joint Surg Am. 2004;86:1271-1282.
4. Bradford L, Baker D, Ries MD, Pruitt LA. Fatigue crack propagation resistance of highly crosslinked polyethylene. Clin Orthop Relat Res. 2004;429:68-72.
5. Bradford L, Kurland R, Sankaran M, Kim H, Pruitt LA, Ries MD. Early failure due to osteolysis associated with contemporary highly cross-linked ultra-high molecular weight polyethylene: a case report. J Bone Joint Surg Am. 2004;86:1051-1056.
6. Bragdon CR, Jasty M, Muratoglu OK, Harris WH. Third-body wear testing of a highly cross-linked acetabular liner: the effect of large femoral head size in the presence of particulate poly(methylmethacrylate) debris. J Arthroplasty. 2005;20:379-385.
7. Burroughs BR, Rubash HE, Harris WH. Femoral head sizes larger than 32 mm against highly cross-linked polyethylene. Clin Orthop Relat Res. 2002;405:150-157.
8. Charnley J. Faltin lecture: evolution of total hip replacement. Ann Chir Gynaecol. 1982;71:103-107.
9. Charnley J, Halley DK. Rate of wear in total hip replacement. Clin Orthop Relat Res. 1975;112:170-179.
10. Costa L, Luda MP, Trossarelly L, Brach del Prever EM, Crova M, Galllinaro O. Oxidation in orthopaedic UHMWPE sterilized by gamma-radiation and ethylene oxide. Biomaterials. 1998;19:659-668.
11. Crowninshield RD. The new orthopaedic hip patient. Hip Int. 2006;16:3-8.
12. Crowninshield RD, Laurent MP, Yao JQ, Bhambri SK, Gsell RA, Gilbertson LN, Swarts DF. Crosslinking to improve THR wear performance. Hip Int. 2002;12:103-107.
13. Crowninshield RD, Rosenberg AG, Sporer SM. Changing demographics of patients with total joint replacement. Clin Orthop Relat Res. 2006;443:266-272.
14. D'Antonio JA, Manley MT, Capello WN, Bierbaum BE, Ramakrishnan R, Naughton M, Sutton K. Five-year experience with Crossfire highly cross-linked polyethylene. Clin Orthop Relat Res. 2005;441:143-150.
15. Della Valle AG, Doty S, Gradl G, Labissiere A, Nestor BJ. Wear of a highly cross-linked polyethylene liner associated with metallic deposition on a ceramic femoral head. J Arthroplasty. 2004;19:532-536.
16. Digas G, Karrholm J, Thanner J, Malchau H, Herberts P. The Otto Aufranc Award. Highly cross-linked polyethylene in total hip arthroplasty: randomized evaluation of penetration rate in cemented and uncemented sockets using radiostereometric analysis. Clin Orthop Relat Res. 2004;429:6-16.
17. D'Lima DD, Hermida JC, Chen PC, Colwell CW Jr. Polyethylene cross-linking by two different methods reduces acetabular liner wear in a hip joint wear simulator. J Orthop Res. 2003;21:761-766.
18. Dorr LD, Wan Z, Shahrdar C, Sirianni L, Boutary M, Yun A. Clinical performance of a Durasul highly cross-linked polyethylene acetabular liner for total hip arthroplasty at five years. J Bone Joint Surg Am. 2005;87:1816-1821.
19. Dumbleton JH, Manley MT, Edidin AA. A literature review of the association between wear rate and osteolysis in total hip arthroplasty. J Arthroplasty. 2002;17:649-661.
20. Ebramzadeh E, Sangiorgio SN, Lattuada F, Kang JS, Chiesa R, McKellop HA, Dorr LD. Accuracy of measurement of polyethylene wear with use of radiographs of total hip replacements. J Bone Joint Surg Am. 2003;85:2378-2384.
21. Engh CA, Sychterz CJ, Engh CA Jr. Conventional ultra-high molecular weight polyethylene: a gold standard of sorts. Instr Course Lect. 2005;54:183-187.
22. nd, Bragdon CR, Plank GR, Huang A, Muratoglu OK, Harris WH. The measurement of creep in ultrahigh molecular weight polyethylene: a comparison of conventional versus highly cross-linked polyethylene. J Arthroplasty. 2005;20:239-243.
23. Geller JA, Malchau H, Bragdon CR, Greene M, Harris WH, Freiberg AA. Large diameter femoral heads on highly cross-linked polyethylene: minimum 3-year results. Clin Orthop Relat Res. 2006;447:53-59.
24. Harris WH. Osteolysis and particle disease in hip replacement. A review. Acta Orthop Scand. 1994;65:113-123.
25. Harris WH. The problem is osteolysis. Clin Orthop Relat Res. 1995;311:46-53.
26. Harris WH. Cross-linked polyethylene: why the enthusiasm? Instr Course Lect. 2001;50:181-184.
27. Harris WH. Wear and periprosthetic osteolysis: the problem. Clin Orthop Relat Res. 2001;393:66-70.
28. Harris WH. Conquest of a worldwide human disease: particle-induced periprosthetic osteolysis. Clin Orthop Relat Res. 2004;429:39-42.
29. Harris WH. Highly cross-linked, electron-beam-irradiated, melted polyethylene: some pros. Clin Orthop Relat Res. 2004;429:63-67.
30. Heisel C, Silva M, dela Rosa MA, Schmalzried TP. Short-term in vivo wear of cross-linked polyethylene. J Bone Joint Surg Am. 2004;86:748-751.
31. Hermida JC, Bergula A, Chen P, Colwell CW Jr, D'Lima DD. Comparison of the wear rates of twenty-eight and thirty-two-millimeter femoral heads on cross-linked polyethylene acetabular cups in a wear simulator. J Bone Joint Surg Am. 2003;85:2325-2331.
32. Isaac GH, Wroblewski BM, Atkinson JR, Dowson D. A tribological study of retrieved hip prostheses. Clin Orthop Relat Res. 1992;276:115-125.
33. Jasty M, Rubash HE, Muratoglu O. Highly cross-linked polyethylene: the debate is over - in the affirmative. J Arthroplasty. 2005;20:55-58.
34. Krushell RJ, Fingeroth RJ, Cushing MC. Early femoral head penetration of a highly cross-linked polyethylene liner vs a conventional polyethylene liner: a case-controlled study. J Arthroplasty. 2005;20:73-76.
35. Kurtz SM, Hozack W, Turner J, Purtill J, MacDonald D, Sharkey P, Parvizi J, Manley M, Rothman R. Mechanical properties of retrieved highly cross-linked crossfire liners after short-term implantation. J Arthroplasty. 2005;20:840-849.
36. Kurtz SM, Muratoglu O, Evans M, Edidin AA. Advances in the processing, sterilization, and crosslinking of UHMWPE for total joint arthroplasty. Biomaterials. 1999;20:1659-1668.
37. Maloney WJ. Enhanced cross-linked polymers: the promise - in the affirmative. Orthopedics. 2002;25:936-937.
38. Manning DW, Chiang PP, Martell JM, Galante JO, Harris WH. In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty. J Arthroplasty. 2005;20:880-886.
39. Martell JM, Verner JJ, Incavo SJ. Clinical performance of a highly cross-linked polyethylene at two years in total hip arthroplasty: a randomized prospective trial. J Arthroplasty. 2003;18:55-59.
40. Muratoglu OK, Bragdon CR, O'Connor DO, Jasty M, Harris WH. A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award. J Arthroplasty. 2001;16:149-160.
41. Muratoglu OK, Bragdon CR, O'Connor DO, Jasty M, Harris WH, Gul R, McGarry F. Unified wear model for highly crosslinked ultrahigh molecular weight polyethylenes (UHMWPE). Biomaterials. 1999;20:1463-1470.
42. nd, Jasty M, Harris WH. Larger diameter femoral heads used in conjunction with a highly cross-linked ultra-high molecular weight polyethylene: a new concept. J Arthroplasty. 2001;16:24-30.
43. Muratoglu OK, Greenbaum ES, Bragdon CR, Jasty M, Freiberg AA, Harris WH. Surface analysis of early retrieved acetabular polyethylene liners: a comparison of conventional and highly cross-linked polyethylenes. J Arthroplasty. 2004;19:68-77.
44. Muratoglu OK, Merrill EW, Bragdon CR, O'Connor D, Hoeffel D, Burroughs B, Jasty M, Harris WH. Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene. Clin Orthop Relat Res. 2003;417:253-262.
45. Muratoglu OK, O'Connor DO, Bragdon CR, Delaney J, Jasty M, Harris WH, Merrill E, Venugopalan P. Gradient crosslinking of UHMWPE using irradiation in molten state for total joint arthroplasty. Biomaterials. 2002;23:717-724.
46. Muratoglu OK, Ruberti J, Melotti S, Spiegelberg SH, Greenbaum ES, Harris WH. Optical analysis of surface changes on early retrievals of highly cross-linked and conventional polyethylene tibial inserts. J Arthroplasty. 2003;18:42-47.
47. Muratoglu OK, Wannomae K, Christensen S, Rubash HE, Harris WH. Ex vivo wear of conventional and cross-linked polyethylene acetabular liners. Clin Orthop Relat Res. 2005;438:158-164.
48. Oonishi H, Clarke IC, Yamamoto K, Masaoka T, Fujisawa A, Masuda S. Assessment of wear in extensively irradiated UHMWPE cups in simulator studies. J Biomed Mater Res A. 2004;68:52-60.
49. Oonishi H, Kadoya Y. Wear of high-dose gamma-irradiated polyethylene in total hip replacements. J Orthop Sci. 2000;5:223-228.
50. Oonishi H, Kuno M, Tsuji E, Fujisawa A. The optimum dose of gamma radiation-heavy doses to low wear polyethylene in total hip prostheses. J Mater Sci Mater Med. 1997;8:11-18.
51. Oonishi H, Tsuji E, Kim YY. Retrieved total hip prostheses. Part I: the effects of cup thickness, head sizes and fusion defects on wear. J Mater Sci Mater Med. 1998;9:393-401.
52. Oonishi H, Tsuji E, Kim YY. Retrieved total hip prostheses: part II. Wear behaviour and structural changes. J Mater Sci Mater Med. 1998;9:575-581.
53. Oral E, Christensen SD, Malhi AS, Wannomae KK, Muratoglu OK. Wear resistance and mechanical properties of highly cross-linked, ultrahigh-molecular weight polyethylene doped with vitamin E. J Arthroplasty. 2006;21:580-591.
54. Rieker CB, Konrad R, Schon R, Schneider W, Abt NA. In vivo and in vitro surface changes in a highly cross-linked polyethylene. J Arthroplasty. 2003;18:48-54.
55. Ries MD. Highly cross-linked polyethylene: the debate is over - in opposition. J Arthroplasty. 2005;20:59-62.
56. Ries MD. Enhanced polyethylene implants: have we been there before? Instr Course Lect. 2005;54:189-192.
57. Ritter MA. Enhanced cross-linked polymers: the promise - in opposition. Orthopedics. 2002;25:938.
58. Saikko V, Calonius O, Keranen J. Wear of conventional and cross-linked ultra-high-molecular-weight polyethylene acetabular cups against polished and roughened CoCr femoral heads in a biaxial hip simulator. J Biomed Mater Res. 2002;63:848-853.
59. Sethi RK, Neavyn MJ, Rubash HE, Shanbhag AS. Macrophage response to cross-linked and conventional UHMWPE. Biomaterials. 2003;24:2561-2573.
60. Sychterz CJ, Moon KH, Hashimoto Y, Terefenko KM, Engh CA Jr, Bauer TW. Wear of polyethylene cups in total hip arthroplasty. A study of specimens retrieved post mortem. J Bone Joint Surg Am. 1996;78:1193-2000.
61. Sychterz CJ, Orishimo KF, Engh CA. Sterilization and polyethylene wear: clinical studies to support laboratory data. J Bone Joint Surg Am. 2004;86:1017-1022.
62. Willie BM, Bloebaum RD, Ashrafi S, Dearden C, Steffensen T, Hofmann AA. Oxidative degradation in highly cross-linked and conventional polyethylene after 2 years of real-time shelf aging. Biomaterials. 2006;27:2275-2284.
63. Wroblewski BM. Charnley low-friction arthroplasty. Review of the past, present status, and prospects for the future. Clin Orthop Relat Res. 1986;210:37-42.
64. Wroblewski BM. 15-21-year results of the Charnley low-friction arthroplasty. Clin Orthop Relat Res. 1986;211:30-35.
65. Wroblewski BM, Siney PD, Dowson D, Collins SN. Prospective clinical and joint simulator studies of a new total hip arthroplasty using alumina ceramic heads and cross-linked polyethylene cups. J Bone Joint Surg Br. 1996;78:280-285.
66. Wroblewski BM, Siney PD, Fleming PA. Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene. A 17-year follow-up report. J Bone Joint Surg Br. 2005;87:1220-1221.