Characterization of the pneumatic behavior of a novel spouted bed apparatus with two adjustable gas inlets

Chemical Engineering Science

Volumn 63, Issue 3, 2008, Pages 791-814

  Gryczka, O ^a   Heinrich, S ^a   Miteva, V ^a   Deen, N G ^b   Kuipers, J A M ^b   Jacob, M ^c   Morl L ^a  

^a OTTO VON GUERICKE UNIVERSITY   (Germany)

^b UNIVERSITY OF TWENTE   (Netherlands)

^c Verfahrenstechnik   (Germany)

Author keywords

Fast Fourier transformation; Particle image velocimetry; Pressure fluctuation; Re G Ar diagram; Spouted bed

Indexed keywords

DRYING; FAST FOURIER TRANSFORMS; PRESSURE EFFECTS; VELOCITY MEASUREMENT;

PARTICLE IMAGE VELOCIMETRY (PIV); PRESSURE FLUCTUATION; RE-G-AR-DIAGRAM; SPOUTED BED;

FLUIDIZED BEDS;

DRYING; FAST FOURIER TRANSFORMS; FLUIDIZED BEDS; PRESSURE EFFECTS; VELOCITY MEASUREMENT;

EID: 36849033859     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ces.2007.10.023     Document Type: Article

References (48)

1. Ando S., Maki T., Mizutani T., Namiki N., Emi H., and Otani Yo. Coating of pharmaceutical particles by spouted bed with a draft tube. Relationship between coating efficiency and operating conditions. Funtai Kogaku Kaishi 37 8 (2000) 572-579
2. Beranek, J., Rose, K., Winterstein G., 1975. Grundlagen der Wirbelschichttechnik. VEB; Deutscher Verlag für Grundstoffindustrie, Leipzig.
3. Bokkers G.A., van Sint Annaland M., and Kuipers J.A.M. Mixing and segregation in a bidisperse gas-solid fluidised bed: a numerical and experimental study. Powder Technology 140 (2004) 176-186
4. Čatipović N.M., Jovanović G.N., and Fitzgerad T.J. Regimes of fluidisation for large particles. A.I.Ch.E. Journal 24 (1978) S.543-S.547
5. Chebotkevich, G.V., Sidorov, N.A., 1975. Calcination of aluminum ammonium alum in a KS spouted-bed combustion-chamber apparatus. USSR. Monokristally I Tekhnika (II), 157-163.
6. Deen N.G., Westerweel J., and Delnoij E. Two-phase PIV of bubbly flows: status and trends. Chemical Engineering & Technology 25-1 (2002) 97-101
7. Devahastin, S., Mujumdar, A.S., Raghavan, G.S.V., 1998. Diffusion-controlled batch drying of particles in a novel rotating jet annular spouted bed. Department of Chemical Engineering, McGill University, Montreal, QC, Canada. Drying Technology 16(3-5), 525-543.
8. Dijkhuizen W., Bokkers G.A., Deen N.G., van Sint Annaland M., and Kuipers J.A.M. Extension of PIV for measuring granular temperature field in dense fluidized beds. A.I.Ch.E. Journal 53 1 (2007) 108-118
9. Freitas, L.A.P., Dogan, O.M., Lim, C.J., Grace, J.R., Bai, D., 2004. Identification of flow regimes in slot-rectangular spouted beds using pressure fluctuations. Faculdade de Ciencias Farmaceuticas de Ribeirao Preto, Universidade de Sao Paulo, Ribeirao Preto, Brazil. Canadian Journal of Chemical Engineering 82(1), 60-73.
10. Hatano S., Kaneko K., Oura Y., and Mori S. Influence of humidity on binderless granulation in a spouted bed. Funtai Kogaku Kaishi 41 8 (2004) 586-591
11. Horio, M., Nomura, T., Kawai, S., Kono, M., 1989. Apparatus for granulation of composite materials using plasma spouted beds. Japan Kokai Tokkyo Koho, 4pp.
12. Iordanova E.N., Mitev D.T., and Mörl L. Einige hydrodynamische. Charakteristiken des Strahlschichtapparates mit zwei Gaseingängen. Chimia i Industria 1 (1998) S.55
13. Iordanova E.N., Mitev D.T., and Mörl L. Hydrodynamische Kennwerte eines Strahlschichtapparates mit zwei Gaseingängen. Chemie Ingenieur Technik 72 9 (2000) S.1059-S.1060
14. Jacob, M., Piskova, E., Mörl, L., Krueger, G., Heinrich, S., Peglow, M., Ruempler, K.H., 2005. Spouted bed technology: characterization of the fluidization behaviour and studies for coating granulation and agglomeration. In: Seventh World Congress of Chemical Engineering, 10-14 July, Glasgow, UK, pp. 86855/1-86855/10.
15. Karlsson S., Bjorn I.N., Folestad S., and Rasmuson A. Measurement of the particle movement in the fountain region of a Wurster type bed. Department of Chemical and Biological Engineering, Chalmers University of Technology, Goeteborg, Sweden. Powder Technology 165 1 (2006) 22-29
16. Kfuri C.R., and Freitas L.A.P. A comparative study of spouted and spout-fluid beds for tablet coating. Drying Technology 23 12 (2005) 2369-2387
17. Kikuchi, K., Suzuki, A., Mochizuki, T., Endo, S., Imai, E., Tanji, Y., 1985. Ash agglomeration in a spouted bed coal gasifier. In: Proceedings of the International Conference on Coal Science, pp. 407-410.
18. Kmiec A., Kucharski J., and Mielczarski S. Kinetics of coal drying in a spouted-bed dryer. Instytut Inzynierri Chemicznej i Urzadzen Cieplnych, Politechnika Wroclawska, Wroclaw, Poland. Inzynieria i Aparatura Chemiczna 33 3 (1994) 17-19
19. Kojouharov, K., 2004. Entwicklung einer neuen Anströmeinrichtung für Strahlschichten. Dissertation, Otto-von-Guericke-Universität Magdeburg.
20. Kunii, J., Levenspiel, O., 1991. Fluidization Engineering, second ed. Butterworth-Heinemann, Stoneham, USA, S.491.
21. Kuts P.S., and Akulich P.V. Kinetics of materials drying in a spouting bed with pulse and peripheral gas inlet. Promyshlennaya Teplotekhnika 24 2-3 (2002) 82-85
22. Leu L.-P., and Lo M.-C. Pressure fluctuations in spouted beds. Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan. Journal of the Chinese Institute of Chemical Engineers 36 4 (2005) 391-398
23. Link J., Zeilstra C., Deen N., and Kuipers H. Validation of a discrete particle model in a 2D spout-fluid bed using non-intrusive optical measuring techniques. Canadian Journal of Chemical Engineering 82 1 (2004) 30-36
24. Link, J.M. 2006. Development and validation of a discrete particle model of a spout-fluid bed granulator. Ph.D. Thesis, Department of Chemical Engineering, Faculty of Science and Technology, University of Twente, Enschede, The Netherlands, pp. 37-40.
25. Link J.M., Cuypers L.A., Deen N.G., and Kuipers J.A.M. Flow regimes in a spout-fluid bed: a combined experimental and simulation study. Chemical Engineering Science 60 13 (2005) 3425-3442
26. Link, J.M., Fan, X., Wood, J., Deen, N.G., Ingram, A., Parker, D.J., Kuipers, J.A.M., 2005b. Comparison of PEPT measurements and discrete particle simulations in a rectangular 3D spout-fluid bed. In: Seventh World Congress of Chemical Engineering, 10-14 July, 2005, Glasgow, UK, Faculty of Science and Technology, University of Twente, Enschede, Neth., pp. 86544/1-86544/10.
27. 2 in a spouted fluidized bed. In: Seventh World Congress of Chemical Engineering, 10-14 July, Glasgow, UK, pp. 83518/1-83518/9.
28. Markovski A., and Kaminski W. Hydrodynamic characteristics of jet-spouted beds. Canadian Journal of Chemical Engineering 61 (1983) S.377-S.381
29. Marreto R.N., Freire J.T., and Freitas L.A.P. Drying of pharmaceuticals: the applicability of spouted beds. Drying Technology 24 3 (2006) 327-338
30. Mathur, K.B., Epstein, N., 1974. Spouted Beds. Academic Press, New York, p. S.284.
31. Mathur K.B., and Gishler P.E. A study of the application of the spouted bed technique to wheat drying. Journal of Applied Chemistry 5 11 (1955) S.624-S.636
32. Mathur, K.B., Gishler, P.E., 1955b. A technique for contacting gases with coarse solid particles. A.I.Ch.E. Journal S.157-S.164.
33. Mitev, D.T., 1967. Untersuchung der Wirbelschichthydrodynamik im prismatischen Apparat. (russ.) Dissertation, LTI Leningrad.
34. Mitev, D.T., 1979. Theoretische und experimentelle Untersuchung der Hydrodynamik, des Wärme- und Stoffüberganges in Strahlschichtapparaten. (russ.), Habilitation, LTI Leningrad.
35. Mitev D.T. Bestimmung der Arbeits- und Optimalgeschwindigkeit des Fluides in Wirbelschichtapparaten (bulg.). GWHTI - Burgas 1 (1984) S.81
36. Mörl, L., Krüger, G., Heinrich, S., Ihlow, M., Jordanova, E., 2001. Steuerbare Gasanströmeinrichtung für Strahlschichtapparate, Deutsche Patentanmeldung 10004939.7 Glatt GmbH, Patentinhaber.
37. Olazar M., San Jose M.J., Aguayo A.T., Arandes J.M., and Bilbao J. Stable operation conditions for gas-solid contact regimes in conical spouted beds. Industrial Engineering & Chemistry Research 31 (1992) S.1784-S.1792
38. Olazar M., San Jose M.J., Aguayo A.T., Arandes J.M., and Bilbao J. Design factors of conical spouted beds and jet spouted beds. Industrial Engineering & Chemistry Research 32 (1993) S.1245-S.1250
39. Park, D., Son, J.S., Jung, D.U., Jeong, Y.B., 2006. High productivity operating apparatus of rotary kiln calciner, comprising a bypass duct, a high temperature cyclone separator for fine dust separation, a crusher, a spout bed dry-type heat exchanger. Republic of Korean Kongkae Taeho Kongbo.
40. Paulo Filho M., Rocha S.C.S., and Lisboa A.C.L. Modeling and experimental analysis of polydispersed particles coating in spouted bed. Chemical Engineering and Processing 45 11 (2006) 965-972
41. Piskova, E., 2002. Untersuchung der Fluiddynamik eines Strahlschichtapparates mit zwei parallelen Gaseintritten und seine Anwendung auf die Beschichtung feindisperser Feststoffteilchen. Dissertation, Otto-von-Guericke-Universität Magdeburg.
42. Piskova E., Kojouharov K., Mitev D., Krüger G., and Mörl L. Spouted bed-constructions of apparatuses, fluid dynamics and application. Journal of the University of Chemical Technology and Metallurgy 38 (2003) 565-570
43. Romankov, P.G., Raschkovskaja, N.B., 1978. Trocknung in Wirbelschichten. Chimia, Leningrad, Russland, p. 278.
44. Scheuch, S., Kamphuis, A.J., McKay, I.R., Walls, J.R., 1996. A two stage fluidized/spouted bed for the granulation of catalyst powder. In: IChemE Research Event, Second European Conference for Young Researchers in Chemical Engineering, 2-3 April, Leeds, UK, pp. 997-999.
45. Silva V.A., Rocha S.C.S., Taranto O.P., and Raghavan G.S.V. Analysis of the stability of a spouted bed fluid dynamic regime by measurements of bed pressure drop fluctuations. Aluna Curso Mestrado Engenharia Quimica, UNICAMP, Brazil. Ciencia & Engenharia 8 2 (1999) 129-137
46. Vuthaluru H.B., and Zhang D. Effect of coal blending on particle agglomeration and defluidisation during spouted-bed combustion of low-rank coals. Fuel Processing Technology 70 1 (2001) 41-51
47. Westerweel J. Fundamentals of digital particle image velocimetry. Measurement Science Technolgy 8 (1997) 1379-1392
48. Zhong, W., Zhang, M., 2005. Investigation of flow patterns in a spout-fluid bed with Shannon entropy and fuzzy cluster analyses. Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Thermo-Energy Engineering Research Institute, Southeast University, Nanjing, Peoples Republic of China. In: Cen, K. (Ed.), Circulating Fluidized Bed Technology VIII. Proceedings of the Eighth International Conference on Circulating Fluidized Beds, 10-13 May, Hangzhou, China, pp. 174-180.