Dynamic crush behaviors of aluminum honeycomb specimens under compression dominant inclined loads

International Journal of Plasticity

Volumn 24, Issue 1, 2008, Pages 89-117

  Hong, Sung Tae ^a   Pan, Jwo ^b   Tyan, Tau ^c   Prasad, Priya ^c  

^a PACIFIC NORTHWEST NATIONAL LABORATORY   (United States)

^b UNIVERSITY OF MICHIGAN   (United States)

^c FORD MOTOR COMPANY   (United States)

Author keywords

Aluminum honeycombs; Compression; Dynamic crush; Impact velocity; Inclined stacking pattern; Plasticity; Yield criterion

Indexed keywords

ALUMINUM; COMPRESSIBILITY; COMPRESSIVE STRENGTH; PLASTICITY; PLASTICS;

ALUMINUM HONEYCOMBS; DYNAMIC CRUSH BEHAVIORS; INCLINED LOADS; INCLINED STACKING PATTERNS;

HONEYCOMB STRUCTURES;

EID: 35348953070     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.02.003     Document Type: Article

References (51)

1. Abramowicz W., and Jones N. Dynamic axial crushing of square tubes. International Journal of Impact Engineering 2 (1984) 179-208
2. Abramowicz W., and Jones N. Dynamic axial crushing of circular tubes. International Journal of Impact Engineering 2 (1984) 263-281
3. Abramowicz W., and Jones N. Dynamic progressive buckling of circular and square tubes. International Journal of Impact Engineering 4 (1984) 243-270
4. Andrews E.W., Gioux G., Onck P., and Gibson L.J. Size effects in ductile cellular solids. part II: experimental results. International Journal of Mechanical Sciences 43 (2001) 701-713
5. Ashby M.F., Evans A., Fleck N.A., Gibson L.J., Hutchinson J.W., and Wadley H.N.G. Metal Foams: a Design Guide (2000), Butterworth-Heinemann, Woburn, MA
6. ASTM C 273-00. Standard Test Method for Shear Properties of Sandwich Core Materials (2000), ASTM, Philadelphia, PA
7. ASTM C 365-03. Standard Test Method for Flatwise Compressive Properties of Sandwich Cores (2003), ASTM, Philadelphia, PA
8. Baker W.E., Togami T.C., and Weydert J.C. Static and dynamic properties of high-density metal honeycombs. International Journal of Impact Engineering 21 (1998) 149-163
9. Bitzer T. Honeycomb Technology: Materials, Design, Manufacturing, Applications and Testing (1997), Chapman & Hall, New York, NY
10. Calladine C.R., and English R.W. Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure. International Journal of Mechanical Sciences 26 (1984) 689-701
11. Chen C., and Fleck N.A. Size effects in the constrained deformation of metallic foams. Journal of the Mechanics and Physics of Solids 50 (2002) 955-977
12. Côté F., Deshpande V.S., and Fleck N.A. The shear response of metallic square honeycombs. Journal of the Mechanics of Materials and Structures 1 (2006) 1281-1299
13. Deshpande V.S., and Fleck N.A. High strain rate compressive behavior of aluminum alloy foams. International Journal of Impact Engineering 24 (2000) 277-298
14. Doyoyo M., and Mohr D. Microstructural response of aluminum honeycomb to combined out-of-plane loading. Mechanics of Materials 35 (2003) 865-876
15. Doyoyo M., and Wierzbicki T. Experimental studies on the yield behavior of ductile and brittle aluminum foams. International Journal of Plasticity 19 (2003) 1195-1214
16. Gibson L.J., and Ashby M.F. Cellular Solids: Structure and Properties. second ed. (1997), Cambridge University Press, Cambridge, UK
17. Goldsmith W., and Louie D.L. Axial perforation of aluminum honeycombs by projectiles. International Journal of Solids and Structures 32 (1995) 1017-1046
18. Goldsmith W., and Sackman J.L. An experimental study of energy absorption in impact on sandwich plates. International Journal of Impact Engineering 12 (1992) 241-262
19. Harrigan J.J., Reid S.R., and Peng C. Inertia effects in impact energy absorbing materials and structures. International Journal of Impact Engineering 22 (1999) 955-979
20. Hexcel Corporation, 1992. Mechanical properties of hexcel honeycomb materials. TSB120, Dublin, CA.
21. Hong, S.-T., 2005. Mechanical behavior of aluminum honeycombs under multiaxial loading conditions. Ph.D. Thesis, University of Michigan, Ann Arbor, MI.
22. Hong, S.T., Pan, J., Tyan, T., Prasad, P., 2002. Influence of shear loads on crush of honeycomb materials. SAE Technical Paper 2002-01-0683, Society of Automotive Engineers, Warrendale, PA.
23. Hong, S.T., Pan, J., Tyan, T., Prasad, P., 2003. Crush strength of aluminum 5052-H38 honeycomb materials under combined compressive and shear loads. SAE Technical Paper 2003-01-0331, Society of Automotive Engineers, Warrendale, PA.
24. Hong, S.T., Pan, J., Tyan, T., Prasad, P., 2004a. Effects of impact velocity on crush behavior of honeycomb specimens. SAE Technical Paper 2004-01-0245, Society of Automotive Engineers, Warrendale, PA.
25. Hong, S.-T., Pan, J., Tyan, T., Prasad, P., 2004b. Dynamic crush behavior of aluminum 5052-H38 honeycomb specimens under out-of-plane inclined loads. In: Paper IMECE2004-61135, ASME International Mechanical Engineering Congress, Anaheim, CA. November 13-19, 2004.
26. Hong S.-T., Pan J., Tyan T., and Prasad P. Quasi-static crush behavior of aluminum honeycombs specimens under compression dominant combined loads. International Journal of Plasticity 22 (2006) 73-109
27. Klintworth, J.W., 1989. Dynamic crushing of cellular solids. Ph.D. Thesis, University of Cambridge, Cambridge, UK.
28. Lin S.-H., Pan J., Wu S., and Tyan T. Failure loads of spot weld specimens under impact opening and shear loading conditions. Experimental Mechanics 44 (2004) 147-157
29. McFarland R.K. Hexagonal cell structures under post-buckling axial load. AIAA Journal 1 (1963) 1380-1385
30. Mohr D., and Doyoyo M. Nucleation and propagation of plastic collapse bands in aluminum honeycomb. Journal of Applied Physics 94 (2003) 2262-2270
31. Mohr D., and Doyoyo M. Experimental investigation on the plasticity of hexagonal aluminum honeycomb under multiaxial loading. Journal of Applied Mechanics 71 (2004) 375-385
32. O'Connor D.J. A comparison of test methods for shear properties of the cores of sandwich constructions. Journal of Testing and Evaluation 17 (1989) 241-246
33. Papka S.D., and Kyriakides S. Biaxial crushing of honeycombs-part I: experiments. International Journal of Solids and Structures 36 (1999) 4367-4396
34. Papka S.D., and Kyriakides S. In-plane biaxial crushing of honeycombs-part II: analysis. International Journal of Solids and Structures 36 (1999) 4397-4423
35. Radford, D.D., McShane, G.J, Deshpande, V.S., Fleck, N.A., submitted. Dynamic compressive response of stainless steel square-honeycombs. Journal of Applied Mechanics.
36. Reid S.R., and Peng C. Dynamic uniaxial crushing of wood. International Journal of Impact Engineering 19 (1997) 531-570
37. Reid S.R., Reddy T.Y., and Peng C. Dynamic compression of cellular structures and materials. In: Jones N., and Wierzbicki T. (Eds). Structural Crash-worthiness and Failure (1993), Elsevier, Amsterdam
38. Reinhardt W.D. Yield criteria for the elastic-plastic design of tubesheets with triangular penetration pattern. Journal of Pressure Vessel Technology 123 (2001) 118-123
39. Stronge W.J., and Shim V.P.-W. Microdynamics of crushing in cellular solids. Journal of Engineering Materials and Technology 110 (1988) 185-190
40. Su X.Y., Yu T.X., and Reid S.R. Inertia-sensitive impact energy-absorbing structures, part I: effects of inertia and elasticity. International Journal of Impact Engineering 16 (1995) 651-672
41. Su X.Y., Yu T.X., and Reid S.R. Inertia-sensitive impact energy-absorbing structures, part II: effect of strain rate. International Journal of Impact Engineering 16 (1995) 673-689
42. Tam L.L., and Calladine C.R. Inertia and strain-rate effects in a simple plate-structure under impact loading. International Journal of Impact Engineering 11 (1991) 349-377
43. Tan P.J., Reid S.R., Harrigan J.J., Zou Z., and Li S. Dynamic compressive strength properties of aluminum foams. Part I-experimental data and observations. Journal of the Mechanics and Physics of Solids 53 (2005) 2174-2205
44. Tan P.J., Reid S.R., Harrigan J.J., Zou Z., and Li S. Dynamic compressive strength properties of aluminum foams. Part II - 'shock' theory and comparison with experimental data and numerical models. Journal of the Mechanics and Physics of Solids 53 (2005) 2206-2230
45. Wang A.-J., and McDowell D.L. Yield surfaces of various periodic metal honeycombs at intermediate relative density. International Journal of Plasticity 21 (2005) 285-320
46. Wierzbicki T. Crushing analysis of metal honeycombs. International Journal of Impact Engineering 1 (1983) 157-174
47. Wu E., and Jiang W.-S. Axial crush of metallic honeycombs. International Journal of Impact Engineering 19 (1997) 439-456
48. Zhang J., and Ashby M.F. The out-of-plane properties of honeycombs. International Journal of Mechanical Sciences 34 (1992) 475-489
49. Zhao H., and Gary G. Crushing behaviour of aluminium honeycombs under impact loading. International Journal of Impact Engineering 21 (1998) 827-836
50. Zhao H., Elnasri I., and Abdennadher S. An experimental study on the behaviour under impact loading of metallic cellular materials. International Journal of Mechanical Sciences 47 (2005) 757-774
51. Zhou Q., and Mayer R.R. Characterization of aluminum honeycomb material failure in large deformation compression, shear, and tearing. Journal of Engineering Materials and Technology 124 (2002) 412-420