A numerical study of the fatigue behaviour of notched PVD-coated Ti-6Al-4V

SDHM Structural Durability and Health Monitoring

Volumn 3, Issue 3, 2007, Pages 165-176

  Baragetti, Sergio ^a   Tordini, Federico ^b  

^a UNIVERSITY OF BERGAMO   (Italy)

^b UNIVERSITY OF FERRARA   (Italy)

Author keywords

Fatigue; Numerical models; Residual stresses; Submodeling technique; TiN PVD coatings; V notch

Indexed keywords

FATIGUE OF MATERIALS; FATIGUE TESTING; FINITE ELEMENT METHOD; NUMERICAL ANALYSIS; PHYSICAL VAPOR DEPOSITION; RESIDUAL STRESSES; STRESS CONCENTRATION; STRESS MEASUREMENT;

FATIGUE BEHAVIOUR; RESIDUAL STRESS GRADIENT; SUBMODELING TECHNIQUE;

TITANIUM ALLOYS;

EID: 35348941099     PISSN: 19302983     EISSN: 19302991     Source Type: Journal    
DOI: None     Document Type: Article

References (30)

1. American Society for Metals (1980): Metals Handbook, Properties and Selection: Stainless Steels, Tool Materials and Special-Purpose Metals, 9th Ed., vol. 3, ASM, Metals Park, Ohio, pp. 388-391.
2. Baragetti, S.; La Vecchia, G. M.; Terranova, A. (2003): Fatigue behaviour and FEM modelling of thin-coated components. Int J Fat, vol. 25, pp. 1229-1238.
3. Baragetti, S.; La Vecchia, G. M.; Terranova, A. (2005): Variables affecting the fatigue resistance of PVD-coated components. Int J Fat, vol. 27(10-12), pp. 1541-1550.
4. Baragetti, S. (2007): Fatigue resistance of steel and titanium PVD coated spur gears. Int J Fat, vol. 29, pp. 1893-1903.
5. Baragetti, S.; Lusvarghi, L.; Pighetti Mantini, F.; Tordini, F. (2007): Fatigue Behaviour of Notched PVD-coated Titanium Components. Key Engineering Materials, vols. 348-349, pp. 313-316.
6. Bemporad, E.; Sebastiani, M.; De Felicis, D.; Carassiti, F.; Valle, R.; Casadei, F. (2006): Production and characterization of duplex coatings (HVOF and PVD) on Ti-6A1-4V substrate. Thin Solid Films, vol. 515, pp. 186-194.
7. Gelfi, M.; La Vecchia, G. M.; Lecis, N.; Troglio, S. (2005): Relationship between through thickness residual stress of CrN-PVD coatings and fatigue nucleation sites. Surf Coat Technol, vol. 192, pp. 263-268.
8. Guu, Y. H.; Hocheng, H. (2001): Improvement of fatigue life of electrical discharge machined AISI D2 tool steel by TiN coating. Mater Sci Eng, vol. A318, pp. 155-162.
9. Haritos, G. K.; Nicholas, T.; Lanning, D. B. (1999): Notch size effects in HCF behavior of Ti-6A1-4V. Int J Fat, vol. 21, pp. 643-652.
10. Kato, M.; Deng, G.; Inoue, K.; Takatsu, N. (1993): Evaluation of the strength of carburized spur gear teeth based on fracture mechanics. JSME Int J - Series C, vol. 36(2), pp. 233-240.
11. Kim, K. R.; Suh, C. M.; Murakami, R. I.; Chung, C. W. (2003): Effect of intrinsic properties of ceramic coatings on fatigue behaviour of Cr-Mo-V steels. Surf Coat Technol, vol. 171, pp. 15-23.
12. Kolkman, H. J. (1995): Effect of TiN/Ti gas turbine compressor coatings on the fatigue strength of Ti-6A1-4V base metal. Surf Coat Technol, vol. 72, pp. 30-36.
13. Kujawski, D.; Stoychev, S. (2007): Internal stress effects on fatigue crack initiation at notches. Int J Fat, vol. 29, pp. 1744-1750.
14. Lanning, D. B.; Haritos, G. K.; Nicholas, T. (1999): On the use of critical distance theories for the prediction of the high cycle fatigue limit stress in notched Ti-6A1-4V. Int J Fat, vol. 27, pp. 45-57.
15. Lanning, D. B.; Nicholas, T.; Haritos, G. K. (2005): Influence of stress state on high cycle fatigue of notched Ti-6A1-4V specimens. Int J Fat, vol. 21, pp. S87-S95.
16. Mendibide, C.; Steyer, P.; Fontaine, J.; Goudeau, P. (2006): 4124 Improvement of the tribological behaviour of PVD nanostratified TiN/CrN coatings - An explanation. Surf Coat Technol, vol. 201, pp. 4119-4124.
17. Merlo, A. M. (2003): The contribution of surface engineering to the product performance in the automotive industry. Surf Coat Technol, vols. 174-175, pp. 21-26.
18. PalDey, S.; Deevi, S. C. (2003): Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review. Mater Sci Eng, vol. A342, pp. 58-79.
19. Puchi-Cabrera, E. S.; Matínez, F.; Herrera, I.; Berríos, J. A.; Dixit, S.; Bhat, D. (2004): On the fatigue behavior of an AISI 316L stainless steel coated with a PVD TiN deposit. Surf Coat Technol, vol. 182, pp. 276-286.
20. Sadananda, K.; Vasudevan, A. K. (1997): Short crack growth and internal stresses. Int J Fat, vol. 19, pp. S99-S109.
21. Sadananda, K.; Vasudevan, A. K. (2004): Non-propagating incipient cracks from sharp notches under fatigue. Acta Mater, vol. 52(14), pp. 4239-4249.
22. Sadananda, K.; Vasudevan, A. K. (2005): Fatigue crack growth behavior of titanium alloys. Int J Fat, vol. 27(10-12), pp. 1255-1266.
23. Shiozawa, K.; Nishino, S.; Handa, K. (1992): The influence of applied stress ratio on fatigue-strength of TiN-coated carbon-steel. JSME Int J - Series 1, vol. 35(3), pp. 347-353.
24. Su, Y. L.; Yao, S. H.; Wei, C. S.; Wu, C. T.; Kao, W. H. (1998): Evaluation on wear, tension and fatigue behaviour of various PVD coated materials. Mater Lett, vol. 35, pp. 255-260.
25. Su, Y. L.; Yao, S. H.; Wei, C. S.; Kao, W. H.; Wu, C. T. (1999): Comparison of wear, tensile, and fatigue properties of PVD coated materials. Mater Sci Technol, vol. 15(1), pp. 73-77.
26. Su, Y. L.; Yao, S. H.; Wei, C. S.; Kao, W. H.; Wu, C. T. (1999): Influence of single- and multilayer TiN films on the axial tension and fatigue performance of AISI 1045 steel. Thin Solid Films, vol. 338, pp. 177-184.
27. Vasudevan, A. K.; Sadananda, K. (1995): Classification of fatigue crack growth behavior. Met Trans A, vol. 26A, pp. 1221-1234.
28. Vasudevan, A. K.; Sadananda, K.; Loaut, N. (1993): Two critical stress intensities for threshold crack propagation. Scripta Metall, vol. 28, pp. 65-70.
29. Vetter, J.; Barbezat, G; Crummenauer, J.; Avissar, J. (2005): Surface treatment selections for automotive applications. Surf Coat Technol, vol. 200, pp. 1962-1968.
30. Wilson, A. D.; Leyland, A.; Matthews, A. (1999): A comparative study of the influence of plasma treatments, PVD coatings and ion implantation on the tribological performance of Ti-6A1-4V. Surf Coat Technol, vol. 114, pp. 70-80.