Post mass production paradigm (PMPP) trajectories

Journal of Manufacturing Technology Management

Volumn 18, Issue 8, 2007, Pages 1022-1037

  Kuehnle, Hermann ^a  

^a OTTO VON GUERICKE UNIVERSITY   (Germany)

Author keywords

Organizational theory; Strategic manufacturing

Indexed keywords

INDUSTRIAL RESEARCH; INFORMATION TECHNOLOGY; SOCIAL ASPECTS; SOCIETIES AND INSTITUTIONS; STRATEGIC PLANNING; SUSTAINABLE DEVELOPMENT;

INFORMATION AND COMMUNICATIONS TECHNOLOGIES (ICT); ORGANIZATIONAL THEORY; POST MASS PRODUCTION PARADIGM (PMPP); STRATEGIC MANUFACTURING;

PRODUCTION ENGINEERING;

EID: 35348861404     PISSN: 1741038X     EISSN: None     Source Type: Journal    
DOI: 10.1108/17410380710828316     Document Type: Article

References (44)

1. Anderson, C. and Bunce, P. (2000), Next Generation Manufacturing Systems (NGMS), White Paper, CAM-I, Burleson, TX.
2. Barbasi, A-L. (2005), "Network theory - the emergence of the creative enterprise", Science, Vol. 308.
3. Bennett, D.J. (1996), "Lean production and work organisation", International Journal of Operations and Production Management, Vol. 16 No. 2, Special Issue.
4. BMED (2002), Modeling and Simulation in Manufacturing and Defense Acquisition: Pathways to Success, Board on Manufacturing and Engineering Design, Division on Engineering and Physical Sciences, National Research Council, National Academic Press, Washington, DC.
5. Boronowski, M., Herzog, O., Knackfuss, P. and Lawo, M. (2005), "wearIT±work - empowering the mobile worker by wearable computing - the first results", in Pallot, M. and Pawar, K.S. (Eds), Proceedings of the 1st AMI±Work - Communities Forum Day, Nottingham.
6. Brennan, R., Christensen, J., Gruver, W., Kotak, D., Norrie, D. and Leeuwen, E. (2005), "Holonic manufacturing systems - a technical overview", in Zurawski, R. (Ed.), The Industrial Information Technology Handbook, Industrial Electronics Series, CRC Press, Boca Raton, FL.
7. Camarinha-Matos, L.M. and Afsarmanesh, H. (2005), "Collaborative networks: a new scientific discipline", Journal of Intelligent Manufacturing, Vol. 16, pp. 439-52.
8. Committee on New Directions in Manufacturing (2004), New Directions in Manufacturing: Report of a Workshop, National Research Council, Washington, DC.
9. Cooper, R., Evans, S., Gregory, S. and O'Brien, C. (2006), "Design-make-serve, delivering products and services to the modern world", Discussion document for the UK Manufacturing Professors Forum, London, July.
10. CVMC (1998), Visionary Manufacturing Challenges for 2020, Committee on Visionary Manufacturing Challenges, National Academy Press, Washington, DC.
11. Deen, S.M. (2003), Agent Based Manufacturing - Advances in the Holonic Approach, Advanced Information Processing, Berlin.
12. Dunning, J.H. (1993), Multinational Enterprises and the Global Economy, Addison-Wesley, Wokingham.
13. Fleury, A. and Fleury, M.T.L. (2006), "Understanding late-movers in international manufacturing", Proceedings of 6th European Operations Management Association (EurOMA 2006), Glasgow.
14. Freeman, C. (1995), "The national system of innovation in historical perspective", Cambridge Journal of Economics, No. 19.
15. FuTMaN (2003), "The future of manufacturing in Europe 2015-2020, the challenge for sustainability", Final Report March 2003, available at: http://ec.europa.eu/research/industrialtechnologies/pdf/pro-futman-doc1-final- report-16-4-03.pdf.
16. Gaines, B.R., Norrie, D.H. and Lapsley, A.Z. (1995), "Mediator: an intelligent information system supporting the virtual manufacturing enterprise", Proceedings of 1995 IEEE International Conference on Systems, Man and Cybernetics, New York, NY.
17. GNOSIS (1994), Intelligent Manufacturing Systems: IMS Test Case 7: Knowledge Science Institute and Division of Manufacturing Engineering, University of Calgary, Calgary, available at: ftp://ksi.cpsc.ucalgary.ca/IMS/ GNOSIS/TC7.
18. Goldman, S.L., Nagel, R.N. and Preiss, K. (1995), Agile Competitors and Virtual Organizations, Van Nostrand Reinhold, New York, NY.
19. Holbrook, J.A. and Wolfe, D.A. (2002), "Social capital and cluster development in learning regions", Knowledge, Clusters and Regional Innovation: Economic Development in Canada, Queen's School of Policy Studies and McGill-Queen's University Press, Kingston.
20. IMTI (2000), Integrated Manufacturing Technology Initiative - Integrated Manufacturing Technology Roadmapping Project - An Overview of the IMTR Roadmaps, IMTI, London.
21. Kakko, I., Lavikainen, M. and Glotova, T. (2006), "Network oasis: new practices for emergent collaborative working environments", in Camarinha-Matos, L.M., Afsarmanesh, H. and Ollus, M. (Eds), Network-Centric Collaboration and Supporting Frameworks, IFIP International Processing, Boston, MA, p. 224.
22. Kidd, P.T. (1994), Agile Manufacturing: Forgoing New Frontiers, Addison-Wesley, Reading, MA.
23. Klopp, M. and Hartmann, M. (1999), Das Fledermausprinzip - Strategische Früherkennung für Unternehmen, Logis, Stuttgart.
24. Kuhn, Th.S. (1962), The Structure of Scientific Revolutions, The University of Chicago Press, Chicago, IL.
25. Kühnle, H. (1995), "L'entreprise fractale", in Braesch, C. and Haurat, A. (Eds), La modélisation systémique en entreprise, Ple productique Rhne-Alpes, Paris.
26. Kühnle, H. and Martinez, J. (2000), "Paradigmatic options for future production", in IMS/GNOSIS Consortium (Ed.), GNOSIS Open Day Conference Proceedings, Tokyo, 6 March.
27. Kühnle, H. and Schmelzer, S.F. (1995), "A new paradigm - the fractal view of the factory", Proceedings British Academy of Management - Annual Conference, Sheffield, 11-13 September.
28. Liker, J. (2003), The Toyota Way: 14 Management Principles from the World's Greatest Manufacturer, 1st ed., McGraw-Hill, New York, NY.
29. Lundvall, B-A. (1988), "Innovation as an interactive process; from user-producer interaction to the national system of innovation", in Dosi, G., Freeman, C., Nelson, R., Silverberg, G. and Soete, L. (Eds), Technical Change and Economic Theory, Pinter, New York, NY, pp. 349-69.
30. Miles, I., Weber, M. and Flanagan, K. (2003), "The future of manufacturing in Europe 2015-2020, the challenge for sustainability, governance, social attitudes and politics, EU/FutMan", Final Report.
31. NGM (1997), Next-Generation Manufacturing: A Framework for Action, NGMS Project Office, Bethlehem, PA, available at: www.agilityforum.org.
32. Ohno, T. (1988), Toyota Production System: Beyond Large-Scale Production, Productivity Press, Cambridge, MA.
33. Okino, N. (1993), "Bionic manufacturing systems", in Peklenik, J. (Ed.), Proceedings Conference on Flexible Manufacturing Systems, Past, Present-Future, Faculty of Mechanical Engineering, Ljubljana.
34. Pallot, M. (2007), "Analysis of the survey on emerging trends for eProfessionals collaboration space", in ECOSPACE consortium (Ed.), ECOSPACE Newsletter No. 3, available at: www.ami-communities.eu/wiki/ ECOSPACENewsletterNo3.
35. Pallot, M., Prinz, W. and Schaffers, H. (2005), "Future workplaces, towards the 'collaborative' web", in Pallot, M. and Pawar, K.S. (Eds), Proceedings of the 1st AMI±Work - Communities Forum Day, Nottingham.
36. Santoro, R. and Bifulco, A. (2006), "The 'Concurrent Innovation' paradigm for integrated product/service development, ESoCE-NET", White Paper, available at: www.ESOCE.net.
37. Serrano, V. (2007), Results of the Study: Collaboration in Ubiquitous Systems, WHU - Otto Beisheim School of Management, Vallendar.
38. Shapira, P., Youtie, J. and Urmanbetova, A. (2004), "Advanced technology and the future of US manufacturing", Proceedings of a Georgia Tech Research and Policy Workshop, Georgia Institute of Technology, Atlanta, GA.
39. Tomiyama, T. (1997), "A manufacturing paradigm toward the 21st century", Integrated Computer Aided Engineering, Vol. 4 No. 3.
40. Tylecote, A. and Conesa, E. (1999), "Corporate governance, innovation system and industrial performance", Industry and Innovation, Vol. 6 No. 1.
41. Ueda, K. (1996), "Biological manufacturing systems", 1996 NGMS International Conference Proceedings, CAM-I, Irvine, 5-9 February.
42. VanBrussels, H., Wyns, J., Valckenaers, P., Bongaerts, L. and Peeters, P. (1998), "Reference architecture for holonic manufacturing systems - PROSA", Computers in Industry, Vol. 37.
43. Webb, C., Wunram, M., Lettice, F. and Klein, P. (2005), "Improving problem solving capabilities in concurrent engineering via knowledge transformation & six complexity science principles", Proceedings of the 11th International Conference on Concurrent Enterprising - Integrated Engineering of Products, Services and Organisations, Nottingham, pp. 111-8.
44. Womack, J., Jones, D. and Roos, D. (1990), The Machine that Changed the World, Harper, New York, NY.