Update to ASCE/SEI 41 concrete provisions

Earthquake Spectra

Volumn 23, Issue 3, 2007, Pages 493-523

  Elwood, Kenneth J ^a   Matamoros, Adolfo B ^b   Wallace, John W ^c   Lehman, Dawn E ^d   Heintz, Jon A ^e   Mitchell, Andrew D ^f   Moore, Mark A ^g   Valley, Michael T ^h   Lowes, Laura N ^d   Comartin, Craig D ⁱ   Moehle, Jack P ^j  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

^b University of Kansas   (United States)

^c University of California   (United States)

^d University of Washington   (United States)

^e Applied Technology Council   (United States)

^f DEGENKOLB ENGINEERS   (United States)

^g Forell/Elsesser Engineers   (United States)

^h Magnusson Klemencic Associates   (United States)

ⁱ CDComartin Inc   (United States)

^j Berkeley   (United States)

more..

Author keywords

[No Author keywords available]

Indexed keywords

BEAMS AND GIRDERS; BUILDINGS; COLUMNS (STRUCTURAL); JOINTS (STRUCTURAL COMPONENTS); REINFORCED CONCRETE; RETROFITTING; STRUCTURAL FRAMES; WALLS (STRUCTURAL PARTITIONS);

REINFORCED CONCRETE BUILDING; SEISMIC RETROFIT; STRUCTURAL CAPACITY;

SEISMIC DESIGN;

BUILDING; REINFORCED CONCRETE; SEISMIC RETROFIT; STRUCTURAL COMPONENT;

EID: 34848885087     PISSN: 87552930     EISSN: None     Source Type: Journal    
DOI: 10.1193/1.2757714     Document Type: Article

References (39)

1. ACI 318, 2005. Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Mich.
2. ACI 352, 2002. Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures, ACI 352R-02, American Concrete Institute, Farmington Hills, Mich.
3. Allen, F., and Darvall, P., 1977. Lateral load equivalent frame, ACI Struct. J. 74, 294-299.
4. ASCE/SEI 41, 2007. Seismic Rehabilitation of Existing Buildings, American Society of Civil Engineers, Reston, VA.
5. Barda, F., Hanson, J. M., and Corley, W. G., 1977. Shear strength of low-rise walls with boundary elements, in Reinforced Concrete Structures in Seismic Zones, SP-53, American Concrete Institute, Farmington Hills, Mich., pp. 149-202.
6. Bayrak, O., and Sheikh, S. A., 1995. High strength concrete columns under simulated earthquake loading, ACI Struct. J. 94, 708-722.
7. Beres, A., White, R., and Gergely, P., 1992. Seismic Behavior of Reinforced Concrete Frame Structures with Nonductile Details: Part I - Summary of Experimental Findings of Full Scale Beam-Column Joint Tests, Report NCEER-92-0024, NCEER, State University of New York at Buffalo.
8. Berry, M., Parrish, M., and Eberhard, M., 2004. PEER Structural Performance Database User's Manual, Pacific Earthquake Engineering Research Center, University of California, Berkeley [available at: www.ce.washington.edu/~peera1].
9. Cardenas, A. E., Russell, H. G., and Corley, W. G., 1980. Strength of low-rise structural walls, in Reinforced Concrete Structures Subjected to Wind and Earthquake Forces, SP-63, American Concrete Institute, Farmington Hills, Mich., pp. 221-241.
10. Cho, J.-Y., and Pincheira, J. A., 2006. Inelastic analysis of reinforced concrete columns with short lap splices subject to reversed cyclic loads, ACI Struct. J. 103, 280-290.
11. EERI/PEER, 2006. New Information on the Seismic Performance of Existing Concrete Buildings, Seminar Notes, Earthquake Engineering Research Institute, Oakland, Calif.
12. Elwood, K. J., and Eberhard, M. O., 2006. Effective stiffness of reinforced concrete columns, PEER Research Digest, No. 2006-1.
13. Elwood, K. J., and Moehle, J. P., 2005. Axial capacity model for shear-damaged columns, ACI Struct. J. 102, 578-587.
14. FEMA 273, 1997. NEHRP Guidelines for the Seismic Rehabilitation of Buildings, FEMA Publication No. 273, prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency, Washington, D.C.
15. FEMA 274, 1997. NEHRP Commentary on the Guidelines for Seismic Rehabilitation of Buildings, FEMA Publication No. 274, prepared by the Building Seismic Safety Council for the Federal Emergency Management Agency, Washington, D.C.
16. FEMA 356, 2000. Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA Publication No. 356, prepared by the American Society of Civil Engineers for the Federal Emergency Management Agency, Washington, D.C.
17. FEMA 440, 2005. Improvement of Nonlinear Static Seismic Analysis Procedures, Federal Emergency Management Agency, Washington, D.C.
18. Grossman, J., 1997, Verification of proposed design methodologies for effective width of slabs in slabcolumn frames, ACI Struct. J. 94, 181-196.
19. Hidalgo, P. A., Ledezma, C. A., and Jordan, R. M., 2002. Seismic behavior of squat reinforced concrete shear walls, Earthquake Spectra 18, 287-308.
20. Higashi, Y., and Ohwada, Y., 1969. Failing behaviors of reinforced concrete beam-column connections subjected to lateral load, Memoirs of Faculty of Technology Tokyo Metropolitan University, Tokyo, Japan 19, 91-101.
21. Hirosawa, M., 1975. Past Experimental Results on Reinforced Concrete Shear Walls and Analysis on Them, Building Research Institute, Ministry of Construction, No. 6 [in Japanese].
22. Hwang, S.-J., and Moehle, J. P., 2000. Models for laterally loaded slab-column frames, ACI Struct. J. 97, 345-353.
23. Kang, T. H.-K., Elwood, K. J., and Wallace, J. W., 2006. Dynamic tests and modeling of RC and PT slab-column connections, 8th US National Conference on Earthquake Engineering, San Francisco, Calif., Paper 0362.
24. Kang, T. H.-K., and Wallace, J. W., 2005. Responses of flat plate systems subjected to simulated earthquake loading, ACI Struct. J. 102, 763-773.
25. Leon, R. T., 1990. Shear strength and hysteretic behavior of interior beam-column joints, ACI Struct. J. 87, 3-11.
26. Lynn, A. C., Moehle, J. P., Mahin, S. A., and Holmes, W. T., 1996. Seismic evaluation of existing reinforced concrete columns, Earthquake Spectra 4, 715-739.
27. Massone, L. M., 2006. RC Wall Shear - Flexure Interaction: Analytical and Experimental Responses, Ph.D. dissertation, Department of Civil & Environmental Engineering, University of California, Los Angeles.
28. Melek, M., and Wallace, J. W., 2004. Cyclic behavior of columns with short lap splices, ACI Struct. J. 101, 802-811.
29. Mitra, N., and Lowes, L. N., 2007. Evaluation, calibration and verification of a reinforced concrete beam-column joint model, J. Struct. Eng. 133, 105-120.
30. Ousalem, H., Kabeyasawa, T., and Tasai, A., 2004. Evaluation of ultimate deformation capacity at axial load collapse of reinforced concrete columns, Proceedings of 13th World Conference on Earthquake Engineering, Paper No. 370.
31. Qaisrani, A.-N., 1993. Interior Post-Tensioned Flat-Plate Connections Subjected to Vertical and Biaxial Lateral Loading, Ph.D. dissertation, Department of Civil Engineering, University of California, Berkeley.
32. Sezen, H., and Moehle, J. P., 2004. Shear strength model for lightly reinforced concrete columns, J Struct. Eng. 130, 1692-1703.
33. Sezen, H., and Moehle, J. P., 2006. Seismic tests of concrete columns with light transverse reinforcement, ACI Struct. J. 103, 842-849.
34. Sozen, M. A., and Moehle, J. P., 1993. Stiffness of Reinforced Concrete Walls Resisting In-Plane Shear, Research Project 3094-01, Final Report, Electric Power Research Institute, Palo Alto, Calif.
35. Vanderbilt, M. D., and Corley, W. G., 1983. Frame analysis of concrete buildings, Concr Int. 5, 33-43.
36. Walker, S., Yeargin, C., Lehman, D. E., and Stanton, J., 2007. Seismic performance of non-ductile reinforced concrete beam-column joints, ACI Struct. J., accepted for publication.
37. Wallace, J., 2007. Modeling issues for tall reinforced concrete core wall buildings, Proceedings, Los Angeles Tall Buildings Structural Design Council, Annual Meeting, 4 May 2007, Los Angeles, Calif.
38. Wallace, J., Massone, L., and Orackal, K., 2006. St. Josephs Healthcare Orange, California SPC-2 Upgrade: E/W Wing Component Test Program, UCLA SEERL Report 2006/01, Department of Civil & Environmental Engineering, University of California, Los Angeles.
39. Yoshimura, M., Takaine, Y, and Nakamura, T., 2004. Axial collapse of reinforced concrete columns, Proceedings of 13th World Conference on Earthquake Engineering, Paper No. 1699.