Modeling and analysis of transient behavior of polymer electrolyte membrane fuel cell hybrid vehicles

Journal of Fuel Cell Science and Technology

Volumn 4, Issue 3, 2007, Pages 261-271

  Arsie, Ivan ^a   Di Domenico, Alfonso ^a   Pianese, Cesare ^a   Sorrentino, Marco ^a  

^a UNIVERSITY OF SALERNO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CONTROL SYSTEM ANALYSIS; ENERGY CONVERSION; OPTIMIZATION; TRANSIENT ANALYSIS;

ENERGY CONVERSION SYSTEM; HYBRID POWERTRAINS; HYBRID VEHICLES;

PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC);

EID: 34748860340     PISSN: 1550624X     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2743071     Document Type: Article

References (38)

1. Hackney, J., and de Neufville, R., 2001, "Lifecycle Model of Alternative Fuel Vehicles: Emissions, Energy, and Cost Tradeoffs," Transp. Res., Part A: Policy Pract., 35A, pp. 243-266.
2. Nakata, T., 2000, "Analysis of the Impact of Hybrid Vehicles on Energy Systems in Japan," Transp. Res. D, 5, pp. 373-383.
3. Riley, Q. R., 1994, Alternative Cars in the 21st Century: A New Personal Transportation Paradigm, SAE Publication, Warrendale.
4. Powell, B. K., Bailey, K. E., and Cikanek, S. R., 1998, "Dynamic Modeling and Control of Hybrid Vehicle Powertrain Systems," IEEE Control Syst. Mag., 18(5), pp. 17-33.
5. Nagasaka, A., Nada, M., Hamada, H., Hiramatsu, S., Kikuchi, Y., and Kato, H., 1998, "Development of the Hybrid/Battery ECU for the Toyota Hybrid System," SAE Paper No. 981122, SP-1331, pp. 19-27.
6. Baumann, B., Rizzoni, G., and Washington, G., 1998, "Intelligent Control of Hybrid Vehicles Using Neural Networks and Fuzzy Logic," SAE Paper No. 981061, SP-1356, pp. 125-133.
7. Guzzella, L., and Amstutz, A., 1999, "CAE Tools for Quasi-Static Modeling and Optimization of Hybrid Powertrains," IEEE Trans. Veh. Technol., 48(6), pp. 1762-1769.
8. Thijssen, J. H. J. S., and Teagan, W. P., 2002, "Long-Term Prospects for PEMFC and SOFC in Vehicle Applications," SAE Paper No. 2002-01-0414.
9. Rousseau, A., Ahluwahlia, R., Deville, B., and Zhang, Q., 2003, "Well-to-Wheels Analysis of Advanced SUV Fuel Cell Vehicles," SAE Paper No. 2003-01-0415.
10. Bernay, C., Marchanda, M., and Cassir, M., 2002, "Prospects of Different Fuel Cell Technologies for Vehicle Applications," J. Power Sources, 108, pp. 139-152.
11. Davis, C., Edelstein, B., Evenson, B., and Brecher, A., 2003, "Hydrogen Fuel Cell Vehicle Study," American Physical Society Report .
12. Boettner, D. D., Paganelli, G., Guezennec, Y. G., Rizzoni, G., and Moran, M. J., 2001, "Proton Exchange Membrane (PEM) Fuel Cell System Model for Automotive Vehicle Simulation and Control," Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, Nov. 11-16, New York.
13. Rodatz, P., Garcia, O., Guzzella, L., Büchi, F., Bartschi, M., Tsukada, A., Dietrich, P., Kötz, R., Scherer, G., and Wokaun, A., 2003, "Performance and Operational Characteristics of a Hybrid Vehicle Powered by Fuel Cells and Supercapacitors," SAE Paper No. 2003-01-0418.
14. Pukrushpan, J. T., Peng, H., and Stefanopoulou, A. G., 2002, "Simulation and Analysis of Transient Fuel Cell System Performance Based on a Dynamic Reactant Flow Model," Proceedings of 2002 ASME International Mechanical Engineering Congress & Exposition, Nov. 17-22, New Orleans, LA.
15. Lee, K. C., Choi, S. H., Kim, S. W., Lim, T. W., and Cho, W. S., 2002, Ηyundai Santa Fe FCV Powered by Hydrogen Fuel Cell Power Plant Operating Near Ambient Pressure," SAE Paper No. 2002-01-0093.
16. Schell, A., Peng, H., Tran, D., Stamos, E., Lin, C. C., and Kim, M. J., 2004, "Modeling and Control Strategy Development for Fuel Cell Electric Vehicles," Proceedings IFAC Symposium "Advances in Automotive Control," Salerno, April 19-23.
17. Choi, T., Guezennec, Y. G., and Rizzoni, G., 2003, "Supervisory Control of a Fuel Cell SUV Hybridized With Supercapacitors," Proceedings of 4th International Conference on Control and Diagnostic in Automotive Applications, June 18-20, Sestri Levante; Italy.
18. Arsie, I., Graziosi, M., Pianese, C., Rizzo, G., and Sorrentino, M., 2004, "Optimization of Supervisory Control Strategies for Parallel Hybrid Vehicle With Provisional Load Estimate," Proceeding of the AVEC '04 Symposium on Advance Vehicle Control Technologies, HAN University Arnhem, The Netherlands, 23-27 August.
19. Arsie, I., Di Domenico, A., Pianese, C., and Sorrentino, M., 2004, "A Model for the Dynamic Simulation of Hybrid Vehicles With PEM Fuel Cell," Proceedings 2004 ASME IMECE, Anaheim, CA, November 13-19.
20. Jeong, K. S. I., and Oh, B. S., 2002, "Fuel Economy and Life-Cycle Cost Analysis of a Fuel Cell Hybrid Vehicle," J. Power Sources, 105, pp. 58-65.
21. Larminie, J., and Dicks, A., 2002, Fuel Cell Systems Explained, Wiley, New York,
22. Dhingra, R., Overly, J. G., Davis, G. A., and Das, S., 2002, "Environmental Evaluation of Direct Hydrogen and Reformer-Based Fuel Cell Vehicles," SAE Paper No. 2002-01-0094.
23. Arsie, I., Pianese, C., Rizzo, G., and Santoro, M., 2002, "Optimal Energy Management In A Parallel Hybrid Vehicle," Proceedings 6th ASME-ESDA Conference, Istanbul, July 8-11.
24. Pisu, P., Rizzoni, G., and Calò, E., 2004, "Control Strategies for Parallel Hybrid Electric Vehicles," Proceedings IFAC Symposium "Advances in Automotive Control, Salerno, April, 19-23.
25. Sciarretta, A., Guzzella, L., and Back, M., 2004, "A Real-Time Optimal Control Strategy for Parallel Hybrid Vehicles With On-Board Estimation of the Control Parameters," Proceedings IFAC Symposium Advances in Automotive Control, Salerno, April, 19-23.
26. Barbir, F., Balasubramanian, B., and Neutzler, J., 1999, "Trade-off Design Analysis of Operating Pressure and Temperature in PEM Fuel Cell Systems," Proceedings of the ASME Advanced Energy Systems Division, Nashville, TN, Nov. 14-16, 39, pp. 305-315.
27. Friedman, D. J., Egghert, A., Badrinarayanan, P, and Cunningham, J., 2001, "Balancing Stack, Air Supply and Water/Thermal Management Demands for an Indirect Methanol PEM Fuel Cell System," SAE Paper No. 2001-01-0535.
28. Amphlett, J. C., Baumert, R. M., Mann, R. F., Peppley, B. A., Roberge, P. R., and Rodrigues, A., 1994, "Parametric Modelling of the Performance of a 5-kW Proton Exchange Membrane Fuel Cell Stack," J. Power Sources, 49, pp. 349-356.
29. Bernardi, D. M., and Verbrugge, M. W., 1992, "A Mathematical Model of the Solidpolymer- Electrolyte Fuel Cell," J. Electrochem. Soc., 139(9), pp. 2477-2491.
30. Springer, T. E., Zawodzinski, T. A., and Gottesfeld, S., 1991, "Polymer Electrolyte Fuel Cell Model," J. Electrochem. Soc., 138(8), pp. 2334-2342.
31. Paganelli, G., Guezennec, Y. G., and Rizzoni, G., 2002, "Optimizing Control Strategy for Hybrid Fuel Cell Vehicle," SAE Paper No. 2002-01-0102.
32. Fuel Cell Handbook, 6th ed., 2002, U.S. Department of Energy - National Energy Technology Laboratory Strategic Center for Natural Gas, Morgantown, WV/Pittsburgh, PA / Tulsa, OK.
33. Ge, S. H., and Yi, B. L., 2003, "A Mathematical Model in Different Flow Modes," J. Power Sources, 124, pp. 1-11.
34. Badami, M., and Caldera, C., 2002, "Dynamic Model of a Load-Following Fuel Cell Vehicle: Impact of the Air System," SAE Paper No. 2002-01-0100.
35. Wiartalla, A., Pischinger, S., Bornscheuer, W., Fieweger, K., and Ogrzewalla, J., 2000, "Compressor Expander Unit for Fuel Cell System," SAE Paper No. 2000-01-0380.
36. Arsie, I., Di Domenico, A., Pappalardo, L., Pianese, C., and Sorrentino, M., 2006, "Steady - State Analisys and Energetic Comparison of Air Compressors for Pem Fuel Cell Systems," Proceedings of the 4th Int. Conference on Fuel Cell Science, Engineering and Technology, Irvine, CA, June 19-21.
37. Moraal, P., and Kolmanovsky, I., 1999, "Turbocharger Modeling for Automotive Control Application," SAE Paper No. 1999-01-0908.
38. Butch, S., Cuddy, M., Johnson, V., Markel, T., Rausen, D., Sprik, S., and Wipke, K., 1999, "ADVISOR: Advanced Vehicle Simulator," .