Recent development of Halbach permanent magnet machines and applications

Fourth Power Conversion Conference-NAGOYA, PCC-NAGOYA 2007 - Conference Proceedings

Volumn , Issue , 2007, Pages

  Zhu, Z Q ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Halbach; Permanent magnet; Self shielding

Indexed keywords

DOMESTIC APPLIANCES; ELECTRIC MOTORS; MAGNETIZATION; SERVOMECHANISMS; WAVEFORM ANALYSIS;

FLUX DENSITY; HALBACH; HALBACH MOTORS; MAGNET MACHINES; SELF SHIELDING;

PERMANENT MAGNETS;

EID: 34748813720     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/PCCON.2007.372911     Document Type: Conference Paper

References (47)

1. J.C. Mallinson, "One-sided fluxes - a magnetic curiosity?" IEEE Trans. Magnetics, vol.9, no.4, pp.678-682, 1973.
2. K. Halbach, "Design of permanent magnet, multi-pole magnets with oriented rare earth cobalt material," Nuclear instruments & Methods, vol.169, pp.1-10, 1980.
3. Z. Q. Zhu, and D. Howe, "Halbach permanent magnet machines and, applications: a review," IEE Proc. Electrical Power Applications, vol.148, np.4, pp.299-308, 2001.
4. th European Conf. Composite Materials, 1996, London, UK, pp.361-366.
5. K. Atallah, D. Howe, and P.H., Mellor "Design and analysis of multi-pole Halbach (self-shielding) cylinder brushless permanent magnet machines," Proc. Int. Conf. Elec. Machines and Drives, IEE, 1997, pp.387-391.
6. K. Atallah, and D. Howe, "The application of Halbach cylinders to brushless ac servo motors," IEEE Trans. Magnetics, vol.34, no.4, pp2060-2062, 1998.
7. Z.Q. Zhu, Z.P. Xia, K. Atallah, G.W. Jewell, and D. Howe, "Integrated design of magnet powder aligning system and brushless motor using anisotropic Halbach cylinders," Proc. Int. Conf. Elec. Machines and Drives, IEE, 1999, pp. 123-127.
8. Z. Q. Zhu, Z. P. Xia, K. Atallah, G. W. Jewell, and D. Howe, "Powder alignment system for anisotropic bonded NdFeB Halbach cylinders," IEEE Trans. Magnetics, vol.36, no.5, pp.3349-3352, 2000.
9. Z. Q. Zhu, Z. P. Xia, K. Atallah, G. W. Jewell, and D. Howe, "Analysis of anisotropic bonded NdFeB Halbach cylinders accounting for partial powder alignment," IEEE Trans. Magnetics, vol.36,no.5, pp.3575-3577, 2000.
10. Z.P. Xia, Z. Q. Zhu, G.W. Jewell, and D. Howe, "Comparison of Halbach brushless motors equipped with air-cored or iron cored anisotropic bonded NdFeB rotor," J. Applied Physics, vol.93, no.10, pp.8692-8694, 2003.
11. Z. P. Xia, Z. Q. Zhu, and D. Howe, "Analytical magnetic field analysis of Halbach magnetized permanent magnet machines," IEEE Trans. Magnetics, vol.40, no.4, pp.1864-1872, 2004.
12. Z. Q. Zhu, Z. P. Xia, and D. Howe, "Comparison of Halbach magnetized brushless machines having discrete magnet segments or single ring magnet," IEEE Trans. Magnetics, vol.38, no.5, pp.2997-2999, 2002.
13. Z.Q. Zhu, Z.P. Xia, Y.F. Shi, D. Howe, D., A. Pride, X.J. Chen, "Performance of Halbach magnetised brushless ac motor," IEEE Trans. Magnetics, vol.39, no.5, pp.2992-2994, 2003.
14. E. Potenziani, H.A. Leupold, and D.J. Basarab, "A novel self-shielding permanent magnet rotor assembly," J. Applied Physics, vol.64, no.10, pp.5986-5987, 1988.
15. M. Marinescu, and N. Marinescu, "New concept of permanent magnet excitation for electrical machines - analytical and numerical computation," IEEE Trans. Magnetics, vol.28, pp.1390-1393, 1992.
16. J. Ofori-Tenkorang, and J. H. Lang, "A comparative analysis of torque production in Halbach and conventional surface-mounted permanent magnet synchronous machines', Proc. IEEE Industry Applications Society Annual Meeting, 1995, pp.657-663.
17. Y. Pang, Z.Q. Zhu and D. Howe, "Self-shielding magnetised vs. shaped parallel magnetised PM brushless ac motors," Korean IEE International Trans. Electrical Machinery and Energy Conversion Systems, vol. 5-B, no.1, pp.13-19, 2005.
18. H.C. Lovatt, V.S. Ramsden, and B.C. Mecrow, "Design of an inwheel motor for a solar-powered electric vehicle," Proc. IEE-B, vol.145, no.5, pp.402-408, 1998.
19. R.F. Post, T.K. Fowler, and S.F. Post, "A high-efficiency electromechanical battery," Proc. IEEE, vol.81, no.3, pp.462-474, 1993.
20. A. Colotti, O.Garcia, B. Ronner, and K. Reichert, "Design of an ironless PMSM for flywheel energy storage systems," Proc. Int. Conf. Elec. Machines, 1998, pp. 1128-1133.
21. D. Howe, P. Mason, P.H. Mellor, Z.Y. Wu, and K. Atallah, "Flywheel peak power buffer for electric/hybrid vehicles," Proc. Int. Elec. Machines and Drives Conf., IEEE, 1999, pp.508-510.
22. K. Miyashita, S. Yamashita, S. Tanabe, T. Shimosu, and H. Sento, "Development of a high speed 2-pole permanent magnet synchronous motor," IEEE Trans. PAS, vol.99, no.6, 2175-2181, 1980.
23. Z. Q. Zhu, and D. Howe, "Electrical Machines and drives for electric, hybrid, and fuel cell vehicles," Proc. IEEE, vol.95, no.4, 21 pages, 2007.
24. B.C. Mecrow, A.G. Jack, D. J. Atkinson, S.R. Green, G.J. Atkinson, A. King, and B. Green, "Design and testing of a four-phase fault-tolerant permanent magnet machine for an engine fuel pump," IEEE Trans. Energy Conversion, vol.19, no.4, pp.671-678, 2004.
25. G.J. Atkinson, B.C. Mecrow, A.G. Jack, D.J. Atkinson, P. Sangha, and M. Benarous, "The analysis of losses in high-power fault-tolerant machines for aerospace applications," IEEE Trans. Ind. Appl. vol.42, no.5, pp.1162-1170, 2006.
26. P.H. Mellor, S. G. Burrow, T. Sawata, and M. Holme, "A wide-speed-range hybrid variable-reluctance/permanent magnet generator for future embedded aircraft generation systems," IEEE Trans. Ind. Appl., vol.41, no.2, pp.551-556, 2005.
27. P.H. Mellor, and R. Wrobel, "Optimisation of a brushless motor excited by multi-polar permanent magnet array, Proc. Int. Elec. Machines and Drives Conf., 2005, pp.649-654.
28. D.L. Trumper, W.J. Kim, and M.E. Williams, "Design and analysis framework for linear permanent magnet machines," IEEE Trans. Industry Applications, vol.32, no.2, pp.371-379, 1996.
29. W.J. Kim, M.T. Berhan, D.L. Trumper, and J.H. Lang, "Analysis and implementation of a tubular motor with Halbach magnet array," Proc. IEEE Industry Applications Society Annual Meeting, 1996, pp.471-478.
30. S.M. Jang, S.S. Jeong, and S.D. Cha, "The application of linear Halbach array to eddy current rail brake system," IEEE Trans. Magnetics, vol. 37, no. 4, pp. 2627-2629, 2001.
31. S.M. Jang, and S.H. Lee "Comparison of three types of permanent magnet linear eddy-current brakes according to magnetization pattern," IEEE Trans. Magnetics, vol. 39, no. 5, pp. 3004-3006, 2003.
32. J.B. Wang, and D. Howe, "Tubular modular permanent magnet machine equipped with quasi-Halbach magnetised magnets - Part I: magnetic field distribution, emf, and thrust force," IEEE Trans. Magnetics, vol.41, no.9, pp.2470-2478, 2005.
33. J.B. Wang, and D. Howe, "Tubular modular permanent magnet machine equipped with quasi-Halbach magnetised magnets - Part II: armature reaction and design optimisation," IEEE Trans. Magnetics, vol.41, no.9, pp.2479-2489, 2005.
34. J.B. Wang, and D. Howe, "A linear permanent magnet generator for a free-piston energy converter," Proc. Int. Electrical Machines and Drives Conf., 2005, pp.1521-1528.
35. J. Chai, J. Wang, and D. Howe, "Evaluation of eddy current loss in tubular permanent magnet motors by finite element analysis," Proc. Int. Conf. on Elec. Machines, 2006, Paper No.266.
36. T. Ibrahim, J. Wang, and D. Howe, "Iron loss calculation in a reciprocating soft magnetic composite tubular permanent magnet motor," Proc. Int. Conf. on Elec. Machines, 2006, Paper No.406.
37. E.P. Park, K.H. Hong, et al., "Development of a linear motor for compressors of household refrigerators," Proc. of Int. Symp. Linear Drives and Industry Applications, 2001, pp.283-286.
38. S.M. Jang, J.Y. Choi, D.J. You, and H.W. Cho, "The influence of mechanical spring on the dynamic performance of a moving-magnet linear actuator with cylindrical Halbach array", Proc. IEEE Industry Applications Society Annual Meeting, 2005, pp. 2132-2139.
39. D.L. Trumper, W.J. Kim, and M.E. Williams, "Magnetic arrays," U.S. Patent 5 631 618, May 1997.
40. W.J. Kim, and DL. Trumper, "Active multivariable optimal control of a planar magnetic levitator," Proc. IEEE Int. Conf. on Control Applications, 1997, pp. 97-102.
41. H.S. Cho, C.H. IM, C.H., and H.K. Jung, "Magnetic field analysis of 2-d permanent magnet array for planar motor," IEEE Trans. Magnetics, vol.37, no.5, 2001, pp.3762-3766.
42. H.S. Cho, and H.K. Jung, "Effect of coil position and width on back-EMF constant of permanent magnet planar motors," Proc. Int. Electric Machines and Drives Conf, 2001, pp. 430-435.
43. H.S. Cho, and H.K. Jung, "Analysis and design of synchronous permanent-magnet planar motors," IEEE Trans. Energy Conversion, vol.17, no.4, pp.492-499, 2002.
44. J.C. Compter, and P.CM. Frissen, "Displacement devices," Patent WO 01/18944, March 2001.
45. Y. Honda, S. Yokote, T. Higaki, and Y. Takeda, "Using the Halbach magnet array to develop an ultra high-speed spindle motor for machine tools," Proc. IEEE Industry Applications Society Annual Meeting, 1997, pp.56-60.
46. Z.Q. Zhu, K. Ng, and D. Howe, "Design and analysis of a high-speed brushless PM motor for friction welding application," Proc. Int. Conf. Electrical Machines and Drives, 1997, IEE, pp.381-385.
47. Z.Q. Zhu, J.D. Ede, and D. Howe, "Design of high-speed brushless dc motors for sensorless operation," Proc. Int. Conf. on Electrical Machines, 2004, Paper No.235.