Effect of a polyethylhydrosiloxane admixture on the durability of concrete with supplementary cementitious materials

Journal of Materials in Civil Engineering

Volumn 19, Issue 10, 2007, Pages 809-819

  Sobolev, Konstantin G ^a   Batrakov, Vladimir G ^b  

^a University of Wisconsin Milwaukee   (United States)

^b Gvozdev Research Institute of Concrete and Reinforced Concrete (NIIZHB)   (Russian Federation)

Author keywords

Cements; Concrete durability; Fly ash; Freeze thaw; Silica

Indexed keywords

BINDERS; DURABILITY; FLY ASH; FREEZING; PLASTICIZERS; PORTLAND CEMENT; SLAGS; THAWING;

ADMIXTURE; CEMENTITIOUS MATERIALS; POLYETHYLHYDROSILOXANE;

CONCRETES;

CONCRETE; DURABILITY; FLY ASH; FREEZE-THAW CYCLE; PERMEABILITY; VOID;

EID: 34648854454     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2007)19:10(809)     Document Type: Article

References (35)

1. ASTM. (2004). "Standard reference test method for making potentiostatic and potentiodynamic anodic polarization measurements." ASTM G5-04, Philadelphia.
2. ASTM. (2005). "Fly ash and raw or calcined natural pozzolan for use as a mineral admixture in portland cement concrete." ASTM C618-05, Philadelphia.
3. ASTM. (2006). "Standard test method for microscopical determination of parameters of the air-void system in hardened concrete." ASTM C457-06, Philadelphia.
4. Batrakov, V. G. (1998). Modified concrete - Theory and practice, Stroyizdat, Moscow (in Russian).
5. Batrakov, V. G., Silina, E. S., Sobolev, K., and Zigulev, N. F. (1992). Recommendations on production and application of the high-strength and super-high-strength highly dense concrete with microsilica, Scientific and Research Institute of Concrete and Reinforced Concrete (NIIZhB), Moscow, Russia (in Russian).
6. Batrakov, V. G., and Sobolev, K. (1995). "Multicomponent cement based superplasticized high-strength concretes: Design, properties and optimization." Proc., CANMET/ACI Int. Conf. on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Suppl. Vol., 695-710.
7. Chan, R. W. M., Ho, P. N. L., and Chan, E. P. W. (1999). "Concrete admixtures for waterproofing construction." Architectural Services Dept. of the Government of the Hong Kong, Hong Kong.
8. Kuncevich, O. V. (1983). Concrete of high frost resistance for structures in Arctic regions, Stroyizdat, Leningrad (in Russian).
9. Malhotra, V. M. (1998). "High-performance high-volume fly ash concrete." Proc., High Performance High-Strength Concrete: Material Properties, Structural Behavior, and Field Application, Perth, Australia, 97-122.
10. Mehta, P. K. (1989). "Pozzolanic and cementitious by-products in concrete. Another look." Proc., CANMET/ACI Int. Conf. on Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete, ACI SP-114, 1-14.
11. Moskvin, B. M., Batrakov, V. G., and Kuncevich, O. V. (1980). "Structure and frost resistance of special concrete with admixture GKZ-94." Beton and Zhelezobeton, Moscow, 8, 20-22 (in Russian).
12. Naik, T. R., Kraus, R. N., Siddique, R., and Botha, F. (2002). "Use of ponded fly ash and bottom ash in ready mixed concrete." Research Rep. No. CBU-2002-38/REP-492, Univ. of Wisconsin-Milwaukee, Milwaukee.
13. Neville, A. M. (2000). Properties of concrete, 4th Ed., Prentice-Hall, Harlow, U.K.
14. Ozyildirim, C. (1994). "Laboratory investigation of low-permeability concretes containing slag and silica fume." ACI Mater. J. AMAJEF0889-325X, 91(2), 197-203.
15. Pinto, R. C. A., and Hover, K. C. (2001). "Frost and scaling resistance of high-strength concrete." Building Code Requirements for Structural Concrete, ACI 318-99, RD122, PCA Research Report.
16. Ramachandran, V. S. (1995). Concrete admixtures handbook, 2nd Ed., Noyes, Englewood Cliffs, N.J.
17. Sobolev, K. (2004). "The development of a new method for the proportioning of high-performance concrete mixtures." Cem. Concr. Compos. CCOCEG0958-9465, 26(7), 901-907. 901-907.
18. Sobolev, K., and Batrakov, V. G. (2005). "The effect of a polysiloxane-based admixture on the freezing and thawing resistance of concrete with high volumes of mineral additives." Proc., ACI/CANMET/ IMCYC Raymundo Rivera Int. Symp. on Durability of Concrete, Monterrey, Mexico, 469-485.
19. Sobolev, K., and Ferrada-Gutiérrez, M. (2005). "How nanotechnology can change the concrete world." Am. Ceram. Soc. Bull. ACSBA70002-7812, 11, 16-19.
20. Sobolev, K., and Yeǧinobali, A. (2005). "The development of high strength mortars with improved thermal and acid resistance." Cem. Concr. Res.CCNRAI0008-884610.1016/j.cemconres.2004.06.016, 35(3), 578-583.
21. Stepanova, V. F., Lipey, O. A., and Barykin, P. I. (1991). "Corrosion resistance of steel reinforcement in concrete with waste of ferro-silicon industry." Proc., Conf. on Corrosion and Protection of Structures in Sea Water, Vladivostok, 99-102 (in Russian).
22. Tritthart, J. (1989). "Pore composition and other factors influencing the corrosion risk of reinforcement in concrete." Prog. Colloid Polym. Sci. PCPSD70340-255X, 79, 96-106.
23. USSR State Committee for Standards (GOST). (1978). "Concrete: Standard method for the determination of water absorption." GOST 12730.3-78 (in Russian).
24. USSR State Committee for Standards (GOST). (1984). "Concrete: Standard method for the determination of permeability for water." GOST 12730.5-84 (in Russian).
25. USSR State Committee for Standards (GOST). (1990). "Concrete: Standard method for the determination of strength using reference specimens, complying to ISO 1920-76; ISO 4012-87; ISO 4013-78; ISO 4108-80." GOST 10180-90 (in Russian).
26. USSR State Committee for Standards (GOST). (1992a). "Cement: Test method for determination of flexural and compressive strength." GOST 310.4-92 (in Russian).
27. USSR State Committee for Standards (GOST). (in Russian).
28. USSR State Committee for Standards (GOST). (1993a). "Standard specification for crushed stone and gravel produced from dense rocks." GOST 8267-93 (in Russian).
29. USSR State Committee for Standards (GOST). (1993b). "Standard specification for sand for construction works." GOST 8736-93 (in Russian).
30. USSR State Committee for Standards (GOST). (1995a). "Concrete: Accelerated standard method for the determination of frost-resistance by repeated alternated freezing and thawing." GOST 10060.2-95 (in Russian).
31. USSR State Committee for Standards (GOST). (1995b). "Concrete: Basic standard method for the determination of frost-resistance." GOST 10060.1-95 (in Russian).
32. USSR State Committee for Standards (GOST). (2000). "Concrete mixtures: Methods of testing, complying to ISO 4109-80; ISO 4110-79; ISO 4848-80; ISO 6276-82." GOST 10181-00 (in Russian).
33. Weyers, R. E., and Cady, P. D. (1987). "Deterioration of concrete bridge decks from corrosion of reinforcing steel." Concr. Int.: Des. Constr.CIDCD20162-4075, 9(1), 15-20.
34. Zhang, M.-H., and Gjørv, O. E. (1991). "Effect of silica fume on pore structure and chloride diffusivity of low porosity cement paste." Cem. Concr. Res. CCNRAI0008-884610.1016/ 0008-8846(91)90069-T, 21(6), 1092-1102.
35. Zia, P., Leming, M. L., and Ahmad, S. H. (1991). "High-performance concretes: A state-of-the-art report." SHRP-C/FR-91-103, Strategic Highway Research Program, National Research Council, Washington, D.C.