Analytical solution of air-gap field in permanent-magnet motors taking into account the effect of pole transition over slots

IEEE Transactions on Magnetics

Volumn 43, Issue 10, 2007, Pages 3872-3883

  Liu, Z J ^a,b   Li, J T ^c  

^a DATA STORAGE INSTITUTE   (Singapore)

^b NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^c XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

Air gap field; Analytical solution; Electromagnetic forces; Permanent magnet brushless motor

Indexed keywords

FINITE ELEMENT METHOD; MAGNETIC FIELDS; MAGNETIC FLUX; OPTIMIZATION; PERMANENT MAGNETS;

AIR-GAP FIELD; ELECTROMAGNETIC FORCES; MAGNET POLE TRANSITION; PERMANENT-MAGNET BRUSHLESS MOTOR; STATOR SLOTTING;

ELECTRIC MOTORS;

EID: 34648846082     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2007.903417     Document Type: Article

References (24)

1. N. Schirle and D. K. Lieu, "History and trends in the development of motorized spindles for hard disk drives," IEEE Trans. Magn., vol. 32, no. 3, pp. 1703-1708, May 1996.
2. S. X. Chen, T. S. Low, H. Lin, and Z. J. Liu, "Design, trends of spindle motors for high performance hard disk drives," IEEE Trans. Magn., vol. 32, no. 5, pp. 3848-3850, Sep. 1996.
3. N. Boules, "Prediction of no-load flux density distribution in permanent magnet machines," IEEE Trans. Ind. Appl., vol. IA-21, no. 3, pp. 633-643, May/Jun. 1985.
4. Z. Q. Zhu and D. Howe, "Instantaneous magnetic field distribution in brushless permanent magnet dc motors, Part III: Effect of stator slotting," IEEE Trans. Magn., vol. 29, no. 1, pp. 143-151, Jan. 1993.
5. Q. S. Gu and H. Z. Gao, "Effect of slotting in PM electric machines," Elect. Mach. Power Syst., vol. 10, pp. 273-284, 1985.
6. K. F. Rasmussen, "Analytical prediction of magnetic field from surface mounted permanent magnet motor," in Proc. IEEE IEMDC99, May 9-12, 1999, pp. 34-36.
7. K. F. Rasmussen, H. D. John, T. J. E. Miller, M. I. McGilp, and O. Mircea, "Analytical and numerical computation of air-gap magnetic field in brushless motors with surface permanent magnets," IEEE Trans. Magn., vol. 36, no. 6, pp. 1547-1554, Nov./Dec. 2000.
8. Z. J. Liu, B. Chao, Q. D. Zhang, M. A. Jabbar, and T. S. Low, "Electromagnetic design for hard disk drive spindle motors with fluid film lubricated bearings," IEEE Trans. Magn., vol. 32, no. 5, pp. 3893-3895, Sep. 1996.
9. U. Kim and D. K. Lieu, "Magnetic field calculation in permanent magnet motors with rotor eccentricity: Without slotting effect," IEEE Trans. Magn., vol. 34, no. 4, pp. 2243-2252, Jul. 1998.
10. U. Kim and D. K. Lieu, "Magnetic field calculation in permanent magnet motors with rotor eccentricity: With slotting effect considered," IEEE Trans. Magn., vol. 34, no. 4, pp. 2253-2266, Jul. 1998.
11. J. Faiz and H. Jafari, "Two-dimensional magnetic field analysis of internal-rotor permanent-magnet motors," IEEE Trans. Magn., vol. 35, no. 5, pp. 4232-4237, Sep. 1999.
12. J. F. Gieras, "Analytical approach to cogging torque calculation of PM brushless motors," IEEE Trans. Magn., vol. 40, no. 5, pp. 1310-1316, Sep. 2004.
13. N. Bianchi, S. Bolognani, and F. Luise, "Analysis and design of a pm brushless motor for high-speed operations," IEEE Trans. Energy Conven., vol. 20, no. 3, pp. 629-637, Sep. 2005.
14. R. Qu and T. A. Lipo, "Analysis and modeling of air-gap and zigzag leakage fluxes in a surface-mounted permanent-magnet machine," IEEE Trans. Ind. Appl., vol. 40, no. 1, pp. 121-127, Jan.-Feb. 2004.
15. B. Ackermann, J. H. H. Janssen, R. Sottek, and R. I. Vansteen, "New technique for reducing cogging torque in a class of brushless dc motors," IEE Proc. - Elect. Power Appl., vol 139, no. 4, pp. 315-320, July 1992.
16. Z. Q. Zhu and D. Howe, "Analytical prediction of the cogging torque in radial-field permanent-magnet brushless motors," IEEE Trans. Magn., vol. 28, no. 2, pp. 1371-1374, Mar. 1992.
17. Y. D. Yao, D. R. Huang, J. C. Wang, S. H. Liou, S. J. Wang, T. F. Ying, and D. Y. Chiang, "Simulation study of the reduction of cogging torque in permanent magnet motors," IEEE Trans. Magn., vol. 33, no. 5, pp. 4095-4097, Sep. 1997.
18. C C Hwang, S. B. John, and S. S. Wu, "Reduction of cogging torque in spindle motors for CD-ROM drive," IEEE Trans. Magn., vol. 34, no. 2, pp. 468-470, Mar. 1998.
19. M. Markovic, M. Jufer, and Y. Perriard, "Reducing the cogging torque in brushless dc motors by using conformal mappings," IEEE Trans. Magn., vol. 40, no. 2, pp. 451-455, Mar. 2004.
20. S.-J. Wang and S.-K. Lin, "Analytical prediction of the incremental inductance of the permanent magnet synchronous motors," IEEE Trans. Magn., vol. 40, no. 4, pp. 2044-2046, Jul. 2004.
21. U. Kim and D. K. Lieu, "Effects of magnetically induced vibration force in brushless permanent-magnet motors," IEEE Trans. Magn., vol. 41, no. 6, pp. 2164-2171, Jun. 2005.
22. X. H. Wang, Q. F. Li, and S. H. Wang, "Analytical calculation of air-gap magnetic field distribution and instantaneous characteristics of brushless dc motors," IEEE Trans. Energy Convers., vol. 18, no. 3, pp. 424-432, Sep. 2003.
23. Z. Q. Zhu, K. Ng, N. Schofield, and D. Howe, "Improved analytical modelling of rotor eddy current loss in brushless machines equipped with surface-mounted permanent magnets," IEE Proc. - Elect. Power Appl., vol. 151, pp. 641-650, 2004.
24. R. Rabinovici, "Magnetic field analysis of permanent magnet motors," IEEE Trans. Magn., vol. 32, no. 1, pp. 265-269, Jan. 1996.