Influence of residual stresses from shot peening on fretting fatigue crack growth

Fatigue and Fracture of Engineering Materials and Structures

Volumn 30, Issue 10, 2007, Pages 947-963

  Cadario, A ^a   Alfredsson, B ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Fatigue crack growth; Finite element method; Fretting fatigue; Peening; Residual stress relaxation

Indexed keywords

FATIGUE CRACK PROPAGATION; FINITE ELEMENT METHOD; FRETTING CORROSION; MATHEMATICAL MODELS; RESIDUAL STRESSES; SHOT PEENING; STRESS RELAXATION;

ELASTIC-PLASTIC FINITE ELEMENT;

TITANIUM ALLOYS;

EID: 34548702218     PISSN: 8756758X     EISSN: 14602695     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2007.01165.x     Document Type: Article

References (29)

1. Lindley, T. C. (1997) Fretting fatigue in engineering alloys. Int. J. Fatigue 19, S39-S49.
2. Nowell, D., Dini, D. and Hills, D. A. (2006) Recent developments in the understanding of fretting fatigue. Eng. Fract. Mech. 73, 207-222.
3. Alfredsson, B. and Cadario, A. (2004) A study on fretting friction evolution and fretting fatigue crack initiation for a spherical contact. Int. J. Fatigue 26, 1037-1052.
4. Faanes, S. (1994) Mechanics of fretting fatigue. PhD thesis, Norwegian Institute of Technology, Trondheim.
5. Cadario, A. and Alfredsson, B. (2005) Fretting fatigue crack growth for a spherical indenter with constant and cyclic bulk load. Eng. Fract. Mech. 72, 1664-1690.
6. Fouvry, S., Fridrici, V., Langlade, C., Kapsa, Ph. and Vincent, L. (2006) Palliatives in fretting: A dynamical approach. Tribol. Int. 39, 1005-1015.
7. Hoeppner, D. W. (2006) Fretting fatigue case studies of engineering components. Tribol. Int. 39, 1271-1276.
8. Kirk, D. (1999) Shot peening. Aircr. Eng. Aerosp. Technol. 71, 349-361.
9. Waterhouse, R. B. and Trowsdale, A.J. (1992) Residual stress and surface roughness in fretting fatigue. J. Phys. D: Appl. Phys. 25, A236-A239.
10. Mutoh, Y., Fair, G. H., Noble, B. and Waterhouse, R. B. (1987) The effect of residual stresses induced by shot-peening on fatigue crack propagation in two high strength aluminium alloys. Fatigue Fract. Eng. Mater. 10, 261-272.
11. James, M. R. (1987) Relaxation of residual stresses -An overview. Adv. in Sur. Treat., Technol. - Appl. - Eff. 4, 349-365.
12. Holzapfel, H., Schulze, V., Voehringer, O. and Macherauch, E. (1998) Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process A248, 9-18.
13. Kodama, S. (1972) The behavior of residual stress during fatigue stress cycles. In: Proceedings of the International Conference on Mechanical Behavior of Metals II, Society of Material Science, Kyoto, 2, 111-118.
14. Wang, C. H., Barter, S. A. and Liu, Q. (2003) A closure model to crack growth under large-scale yielding and through residual stress fields. J. Eng. Mater. Technol. Trans. ASME 125, 183-190.
15. Hansson, T. and Clevfors, O. (2001) Fretting fatigue tests at room temperature and 200 °C of Ti-17 specimens with contact pads of Ti-6-4. Volvo Aero Corporation, report 9652-1044.
16. Cadario, A. and Alfredsson, B. (2007) Fatigue growth of short cracks in Ti-17: Experiments and simulations, Engng Fract. Mech. 74, 2293-2310.
17. ASTM E647-00 (2005) Standard test method for measurement of fatigue crack growth rates. In: Annual book of ASTM standards, West Conshohocken, PA.
18. Lee, H. and Mall, S. (2004) Stress relaxation behavior of shot-peened Ti-6Al-4V under fretting fatigue at elevated temperature. Mater. Sci. Eng. A366, 412-420.
19. Hansson, T. (2006) X-ray diffraction determination of the residual stress distributions in two Ti-17 test specimens subjected to fretting fatigue. Volvo Aero Corporation, report 9650-2761.
20. ANSYS Inc., ANSYS Release 8.0. Online Help.
21. Larsen, J. M., Jira, J. R. and Ravichandran, K. S. (1992) Measurement of small cracks by photomicroscopy: Experiments and analysis. In: Small-crack test methods, ASTM STP 1149 (Edited by J.M. Larsen and J.E. Allison) American Society for Testing and Materials, Philadelphia, 57-80.
22. Wu, X. and Carlsson, A. J. (1991) Weight functions and stress intensity factor solutions. Pergamon Press plc, Headington Hill Hall, Oxford OX3 0BW, England.
23. Nilsson, F. (1992) A consistent few parameter crack growth description procedure. Int. J. Fracture 54, 35-44.
24. NASGRO 4.22. (2002) Reference Manual. Southwest Research Institute.
25. Pommier, S. and Bompard, Ph. (2000) Bauschinger effect of alloys and plasticity-induced crack closure: A finite element analysis, Fatigue Fract. Engng. Mater. Struct. 23, 129-139.
26. Romeiro, F. F. J., Domingos, C. A. and de Freitas, M. J. M. (1999) Measurements of fatigue crack closure for negative stress ratio. In: Advances in fatigue crack closure measurements and analysis: Second volume, ASTM STP 1343 (Edited by R.C. McClung and J.C. Newman Jr.). American Society for Testing and Materials, West Conshohocken, PA, 321-336.
27. Benthem, J. P. (1977) State of stress at the vertex of a quarter-infinite crack in a half-space. Int. J. Solids Struct. 13, 479-492.
28. Kiciak, A., Glinka, G., Eman, M. and Shiratori, M. (1998) Weight functions and stress intensity factors for corner quarter-elliptical crack in finite thickness plate subjected to in-plane loading. Engng Fract. Mech. 60, 221-238.
29. Nilsson, L. (1988) Stress intensity factors for half-elliptical surface cracks in plates subjected to complex stress field. SAQ/FoU-Report 98/ 11.