The determination of trace metals in lubricating oils by atomic spectrometry

Spectrochimica Acta - Part B Atomic Spectroscopy

Volumn 62, Issue 9, 2007, Pages 952-961

  Aucélio, Ricardo Q ^a   de Souza, Roseli Martins ^a   de Campos, Reinaldo Calixto ^a   Miekeley, Norbert ^a   da Silveira, Carmem L Porto ^a  

^a PONTIFICAL CATHOLIC UNIVERSITY OF RIO DE JANEIRO   (Brazil)

Author keywords

Atomic spectrometry; ETAAS; FAAS; ICP MS; ICP OES; Lubricating oil; Trace metals; Wear metals

Indexed keywords

CALIBRATION; DIAGNOSTIC PRODUCTS; INDUCTIVELY COUPLED PLASMA; LUBRICATING OILS; ORGANOMETALLICS;

SAMPLE MANIPULATION; SAMPLE PRE-TREATMENT; SPECIFIC SAMPLE CHARACTERISTICS; TECHNICAL DIAGNOSTICS; WEAR METALS;

TRACE ELEMENTS;

EID: 34548613596     PISSN: 05848547     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.sab.2007.05.003     Document Type: Review

References (70)

1. McElroy F., Mennito A., Debrah E., and Thomas R. Uses and applications of inductively coupled plasma mass spectrometry in the petrochemical industry. Spectroscopy 13 (1998) 42-53
2. Varnes A.W. Analytical methods for the analysis of petroleum products. Spectroscopy 1 (1985) 28-33
3. Belman H.M. Oil Debris Monitoring, Avionics Magazine. Bulletin vol. 1667 (1986)
4. Sychra V., Lang I., and Sebor G. Analysis of petroleum and petroleum products by atomic absorption spectroscopy and related techniques. Prog. Anal. At. Spectrosc. 4 (1981) 341-426
5. King A.D., Hilligoss D.R., and Wallace G.F. Comparison of results for determination of wear metals in used lubricating oils by flame atomic absorption spectrometry and inductively coupled plasma emission spectrometry. Atom. Spectrosc. 5 (1984) 189-191
6. Eisentraut K.J., Newman R.W., Saba C.S., Kauffman R.E., and Rhine W.E. Spectrometric oil analysis. Detecting engine failures before they occur. Anal. Chem. 56 (1984) 1086A-1091A
7. Garcia-Anton J., and Grima J.R. Determination of zinc in lubricating oil by polarography of emulsified samples. Fresenius J. Anal. Chem. 343 (1992) 905-906
8. Munoz R.A.A., and Angnes L. Simultaneous determination of copper and lead in ethanol fuel by anodic stripping voltammetry. Microchem. J. 77 (2004) 157-162
9. Munoz R.A.A., Silva C.S., Oliveira P.V., and Angnes L. Potentiometric stripping analysis for simultaneous determination of copper and lead in lubricating oils after total digestion in a focused microwave-assisted oven. Microkhim. Acta 149 (2005) 199-204
10. Munoz R.A.A., Oliveira P.V., and Angnes L. Combination of ultrasonic extraction and stripping analysis: an effective and reliable way for the determination of Cu and Pb in lubricating oils. Talanta 68 (2006) 850-856
11. Tamrakar P.K., and Pitre K.S. Electroanalysis of trace metals in lubricating oils. Bull. Electrochem. 18 (2002) 35-40
12. Pouzar M., Cernohorsky T., and Krejoova A. Determination of metals in lubricating oils by X-ray fluorescence spectrometry. Talanta 54 (2001) 829-835
13. Lord C.J. Determination of trace metals in crude oil by inductively coupled plasma mass spectrometry with micro-emulsion sample introduction. Anal. Chem. 63 (1991) 1594-1599
14. Silva I.A., Campos A.J., Curtius R.C., and Sella S.M. Determination of lead and copper in kerosene by electrothermal atomic absorption spectrometry stabilization of metals in organic media by a 3-component solution. J. Anal. At. Spectrom. 8 (1993) 749-754
15. Barbooti M.M., Zaki N.S., Baha-Udin S.S., and Hassam E.B. Use of silica gel in the preparation of used lubricating oil samples for the determination of wear metals by flame atomic absorption spectrometry. Analyst 115 (1990) 1059-1061
16. Fassel V.A., Peterson C.A., Abercrombie F.N., and Knisely R.N. Simultaneous determination of wear metals in lubricating oils by inductively-coupled plasma atomic emission spectrometry. Anal. Chem. 48 (1976) 516-519
17. Brown R.J. Determination of trace metals in petroleum and petroleum products using an inductively coupled plasma optical emission spectrometer. Spectrochim. Acta Part B 38 (1983) 283-289
18. Merryfield R.N., and Loyd R.C. Simultaneous determination of metals in oil by inductively coupled plasma emission spectrometry. Anal. Chem. 51 (1979) 1965-1968
19. Kuokkanen T., Peramaki P., Valimaki I., and Ronnkomaki H. Determination of heavy metals in waste lubricating oils by inductively coupled plasma-optical emission spectrometry. Intern. J. Anal. Chem. 81 (2001) 89-99
20. Escobar M.P., Smith B.W., and Winefordner J.D. Determination of metallo-organic species in lubricating oil by electrothermal vaporization inductively coupled plasma mass spectrometry. Anal. Chim. Acta 320 (1996) 11-17
21. Duyck C., Miekeley N., Silveira C.L.P., and Szatmari P. Trace element determination in crude oil and its fractions by inductively coupled plasma mass spectrometry using ultrasonic nebulization of toluene solutions. Spectrochim. Acta Part B 57 (2000) 1979-1990
22. Sanz-Segundo C., Hernández-Artiga M.P., De Cisneros J.L.H.H., Bellido-Milla D., and Naranjo-Rodriguez I. Determination of wear metals in marine lubricating oils by microwave digestion and atomic absorption spectrometry. Microkhim. Acta 132 (1999) 89-94
23. Ekanem E.J., Lori J.A., and Thomas S.A. The determination of wear metals in used lubricating oils by flame atomic absorption spectrometry using sulphanilic acid as ashing agent. Talanta 44 (1997) 2103-2108
24. Bellido-Milla D., Ordaz-Garcia S.M., Guerrero-Valiente J.L., and Hernández-Artiga M.P. Rapid procedure to determine wear metals in lubricating oils and the analysis of variance in the evaluation of sample preparation procedures. Mikrochim. Acta 138 (2002) 59-64
25. Costa L.M., Ferreira S.L.C., Nogueira A.R.A., and Nóbrega J.A. Use of factorial design for optimization of microwave-assisted digestion of lubricating oil. J. Braz. Chem. Soc. 16 (2005) 1269-1274
26. Goncalves I.M., Murillo M., and González A.M. Determination of metals in used lubricating oils by AAS using emulsified samples. Talanta 47 (1998) 1033-1042
27. Salvador A., De La Guardia M., and Berenguer V. Determination of the total iron content of used lubricating oils by atomic-absorption with use of emulsions. Talanta 30 (1983) 986-988
28. Blasco J.B.B., Cirugeda M.G., and Carreño A.S. Atomic absorption spectrometric determination of molybdenum in lubricating oils with use of emulsions. Anal. Chim. Acta 174 (1985) 353-357
29. Aucelio R.Q., Curtius A.J., and Welz B. Sequential determination of Sb and Sn in used lubricant oil by electrothermal atomic absorption spectrometry using Ru permanent modifier and micro-emulsion sample introduction. J. At. Anal. Chem. 15 (2000) 1389-1393
30. Aucelio R.Q., and Curtius A.J. A comparative study of electrothermal atomic absorption spectrometric methods for the determination of silver in lubricant used oils. Analyst 125 (2000) 1673-1679
31. Burguera J.L., De Salager R.A., Burguera M., Salager J.L., Róndon C., Carrero P., Gallignami M., Brunetto M.R., and Briceño M. On-line emulsification of lubricating oils in a flow-injection system for chromium determination by electrothermal atomic absorption spectrometry. J. Anal. At. Spectrom. 15 (2000) 549-555
32. Molinero A.L., and Castillo J.R. Determination of nickel and vanadium in oil by inductively coupled plasma-atomic emission spectrometry with micro-emulsion sample introduction. Anal. Lett. 31 (1998) 903-911
33. Souza R.M., Silveira C.L.P., and Aucelio R.Q. Determination of refractory elements in used lubricating oil by ICP-OES employing emulsified sample introduction and calibration with inorganic standards. Anal. Sci. 20 (2004) 351-355
34. Saba C.S., and Eisentraut K.J. Determination of molybdenum wear metal in lubricating oils by atomic absorption spectrophotometry with a particle-size independent method. Anal. Chem. 51 (1979) 1927-1930
35. Sanz-Medel A., De La Campa M.F.R., Gonzalez E.B., and Fernandez-Sanchez M.L. Organised surfactant assemblies in analytical atomic spectrometry. Spectrochim. Acta Part B 54 (1999) 251-287
36. Miller R.L., Fraser L.M., and Winefordner J.D. Combination flame atomic fluorescence atomic emission DC spectrometer for analysis of trace wear metals in jet engine oils. Appl. Spectrosc. 25 (1971) 477-482
37. Patel B.M., and Winefordner J.D. Graphite rod atomization and atomic fluorescence for simultaneous determination of silver and copper in jet-engine oils. Anal. Chim. Acta 64 (1973) 135-138
38. Johnson D.J., Plankey F.W., and Winefordner J.D. Analysis of wear metals in jet-engine oils via atomic fluorescence flame spectrometry with a continuum source. Can. J. Spectrosc. 5 (1974) 151-152
39. Wynn T.F., Clardy P., Vaughn L., Bradshaw J.D., Bower J.N., Epstein M.S., and Winefordner J.D. Wavelength-modulated continuum-source excited atomic fluorescence spectrometric system for wear metals in jet engine lubricating oils using electrothermal atomization. Anal. Chim. Acta 124 (1981) 155-161
40. Vahaoja P., Valimaki I., Heino K., Peramaki P., and Kuokkanen T. Determination of wear metals in lubrication oils: a comparison study of ICP-OES and FAAS. Anal. Sci. 21 (2005) 1365-1369
41. Berndt H., Schaldach G., and Kagler S.H. Flame AAS/flame AES for trace determination in fresh and used lubricating oils with sample introduction by hydraulic high-pressure nebulization. Fressenius J. Anal. Chem. 335 (1996) 37-42
42. Mora J., and Todoli J. Determination of metals in lubricating oils by flame atomic absorption spectrometry using a single-bore high-pressure pneumatic nebulizer. Analyst 125 (2000) 2344-2349
43. Pignalosa G., and Knochen M. Determination of wear metals in lubricating oils using flow injection AAS. At. Spectr. 22 (2001) 150-157
44. Reis B.F., Knochen M., Pignalosa G., Cabrera N., and Giglio J. Determination of insolubles in diesel lubricating oil by FIA-visible spectrometry. Talanta 64 (2004) 1220-1225
45. Hernandez-Artiga M.P., and Munoz-Leyva J.A. Determination of wear-metals in used lubricating oils from marine engines by flame atomic absorption spectrometry. Analyst 117 (1992) 963-966
46. Chuang F.S., and Winefordner J.D. Jet engine oil analysis by atomic absorption spectrometry with graphite filament. Appl. Spectrosc. 28 (1974) 215-218
47. Reeves R.D., Molnar C.J., Glenn M.T., Ahlstrom J.R., and Winefordner J.D. Determination of wear metals in engine oils by atomic absorption spectrometry with a graphite rod atomizer. Anal. Chem. 44 (1972) 2205-2211
48. Saba C.S., Rhine W.E., and Eisentraut K.J. Determination of wear metals in aircraft lubricating oils by atomic absorption spectrophotometry using a graphite furnace atomizer. Appl. Spectrosc. 39 (1985) 689-693
49. Bratzel M.P., and Chackrabarti C.L. Determination of lead in petroleum and petroleum products by atomic absorption spectrometry with a carbon rod atomizer. Anal. Chim. Acta 61 (1972) 25-32
50. Tuell T.M., Ullman A.H., Pollard B.D., Massoumi A., Bradshaw J.D., Bower J.N., and Winefordner J.D. A comparative study of standards for determinations of trace wear metals in jet engine oils. Anal. Chim. Acta 108 (1979) 351-356
51. Slavin W. Graphite Furnace AAS: a Source Book. second ed. (1991), The Perkin-Elmer Corporation, Norwalk, CT
52. Burguera J.L., Burguera M., Antón R.E., Salager J.L., Arandia M.A., Róndon C., Carrero P., de Pena Y.P., Brunetto R., and Gallignami M. Determination of aluminum by electrothermal atomic absorption spectroscopy in lubricating oils emulsified in a sequential injection analysis system. Talanta 68 (2005) 179-186
53. Martín-García M.B., Bellido-Milla D., Jimenez-Jimenez A., and Hernández-Artiga M.P. Application of a fractionary factorial design to the determination of tin in lubricating oils by continuous flow hydride generation-atomic absorption spectrometry. Fresenius J. Anal. Chem. 364 (1999) 527-532
54. Gambril C.M., Gassman A.G., and O'neil W.R. Spectrographic analysis of new and used lubricating oils. Anal. Chem. 23 (1951) 1365-1369
55. Jansen E.B.M., Knipscheer J.H., and Nagtegaal M. Rapid and accurate element determination in lubricating oils using inductively coupled plasma optical emission spectrometry. J. Anal. At. Spectrom. 7 (1992) 127-130
56. Kauffman R.E., Saba C.S., and Rhine W.E. Quantitative multi-element determination of metallic wear species in lubricating oils and hydraulic fluids. Anal. Chem. 54 (1982) 975-979
57. Saba C.S., Rhine W.E., and Eisentraut K.J. Efficiencies of sample introduction systems for the transport of metallic particles in plasma emission and atomic absorption spectrometry. Anal. Chem. 53 (1981) 1099-1103
58. Fischer J.L., and Rademeyer C.J. Direct determination of metals in oils by inductively coupled plasma atomic emission spectrometry using high temperature nebulization. J. Anal. At. Spectrom. 9 (1994) 623-628
59. Algeo J.D., Heine D.R., Phillips H.A., Hoek F.B.G., Schneider M.R., Freelin J.M., and Denton M.B. On the direct determination of metals in lubricating oils by ICP. Spectrochim. Acta Part B 40 (1985) 1447-1456
60. Pforr G., and Aribot O. Inductive plasma flame spectrometry of solids and viscous liquids. Z. F. Chem. 10 (1970) 78-80
61. Greenfield S., and Smith P.B. Determination of trace metals in microliter samples by plasma torch excitation - special reference to oil, organic compounds and blood samples. Anal. Chim. Acta 59 (1972) 341-342
62. Fisher J.L., and Krusberski N.B. An evaluation of emulsions in wear-metal-in-oil analyses. S. Afr. J. Chem. 58 (2005) 131-137
63. Yaroshchyk P., Morrison R.J.S., Body D., and Chadwick B.L. Quantitative determination of wear metals in engine oils using laser-induced breakdown spectroscopy: a comparison between liquid jets and static liquids. Spectrochim. Acta Part B 60 (2005) 986-992
64. Yaroshchyk P., Morrison R.J.S., Body D., and Chadwick B.L. Quantitative determination of wear metals in engine oils using LIBS: the use of paper substrates and a comparison between single- and double-pulse LIBS. Spectrochim. Acta Part B 60 (2005) 1482-1485
65. Bings N.H. Direct determination of metals in lubricating oils by laser ablation coupled to inductively coupled plasma time-of-flight mass spectrometry. J. Anal. At. Spectrom. 17 (2002) 759-767
66. Brandão G.P., Campos R.C., de Castro E.V.R., and de Jesus H.C. Direct determination of nickel in petroleum by solid sampling-graphite furnace atomic absorption spectrometry. Anal. Bional. Chem. 386 (2006) 2249-2253
67. Reyes M.N.M., and Campos R.C. Determination of copper and nickel in vegetable oils by direct sampling graphite furnace atomic absorption spectrometry. Talanta 70 (2006) 929-932
68. Dias F.S., Santos W.L.N., Costa A.C.S., Welz B., Vale M.G.R., and Ferreira S.L.C. Application of multivariate techniques for optimization of direct method for determination of lead in naphtha and petroleum condensate by electrothermal atomic absorption spectrometry. Mikrochim. Acta 151 (2007) 79-84
69. Lepri F.G., Welz B., Borges D.L.G., da Silva A.F., Vale M.G.R., and Heitmann U. Speciation analysis of volatile and non-volatile vanadium compounds in Brazilian crude oils using high-resolution continuum source graphite furnace atomic absorption spectrometry. Anal. Chim. Acta 558 (2006) 195-200
70. Standard test method for determination of additive elements, wear metals, and contaminants in used lubricating oils and determination of selected elements in base oils by inductively coupled plasma atomic emission spectrometry (ICP-AES). ASTM D 4951-02 (2002)